LXtasy
10-26-2012, 09:03 PM
sorry no build thread bought the car with a sbf on gas ran 6.50s then a gm buddy talked me into a ly6 and i put that in with stock k member modded windsor headers a jw bell to c4 and a plate on 150 ran 6.18 with that setup and i was hooked.Found this 6.2 hard burn motor unknown miles and bought a set of used ported heads and a used cam. Bought aje k member a arms new 1 7/8 headers 1050 dom installed a fogger on my mast intake put it in front of the c 4 trans and i could burn one up quick. So i decided to go turbo 400 wanted to keep the 3.73 gear and run good on motor to so. Ordered a new fti motor stall and a ptc nitrous stall. Got it running and blew me away went from 6.90 on motor to 6.31 with a 1.31 sixty on motor after a few weeks of testing. Put the other stall in and set the progressive soft ran 5.91 first pass second pass went 5.70. The radials was shot after all year so i threw on the slicks and went to holly well that suprised me when it did a bumper stand and broke the oil pan and bent the struts got it home and fixed it and changed some things on the susp. And finally running 5.7s easy a 5.6x every once n a while. Loaded up went 1/4 mile on gas.Been 10.05 at 131 on motor. Result was my first 8 second pass kinda figured it would going off of 5.7 eighth mile. Sorry for the long story but i didnt start a build thread cause i really ddint know how fast this would end up on a budjet and being a ford guy. But man these engines are awesome
http://www.youtube.com/watch?v=Bt0AL-cqTQg&feature=plcp
http://ls1tech.com/forums/attachments/single-digit-club/377962d1351225404-8-second-club-884.jpg
http://www.youtube.com/watch?v=Bt0AL-cqTQg&feature=plcp
http://ls1tech.com/forums/attachments/single-digit-club/377962d1351225404-8-second-club-884.jpg