PDA

View Full Version : wellll im not gonna be doin any racin this weekend


1SMKN99
12-15-2012, 12:11 PM
http://i1176.photobucket.com/albums/x334/senorsmoothie/20121215_095236.jpg

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121215_100233.jpg

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121215_102346.jpg

Im assuming there is a new whole in the side of the block courtesy of a rod

ShawnBoyMoody
12-15-2012, 12:14 PM
Ugh. Nitrous and 4.6's FTL. Sorry broham

1SMKN99
12-15-2012, 12:16 PM
Its all good. Just gives me a reason to drop in the 5.0 forged stroker shortblock thats been sittin on the engine stand.

03SVTCOBRA
12-15-2012, 01:05 PM
Sucks, i feel your pain. Bigger and better going back in at least.

Matts94Z28
12-15-2012, 01:11 PM
It's leaking horsepower...

red99pony
12-15-2012, 01:17 PM
just build it bigger and better, then you can beat me by 4 buses instead of 2:hail:

1SMKN99
12-15-2012, 01:22 PM
Wayyy ahead of you jc

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121215_120251.jpg

red99pony
12-15-2012, 01:24 PM
oh yea!:bigthumb:

BIRDMAN
12-15-2012, 01:40 PM
just build it bigger and better, then you can beat me by 4 buses instead of 2:hail:

"Blew up my trans and diff" thread in 3...2...1..

Well at least you have backup engines there Mr juice..-er I mean Justin. :mrgreen:

1SMKN99
12-15-2012, 01:41 PM
"Blew up my trans and diff" thread in 3...2...1..

Well at least you have backup engines there Mr juice..-er I mean Justin. :mrgreen:

Lol I know that will soon follow.

red99pony
12-15-2012, 02:36 PM
"Blew up my trans and diff" thread in 3...2...1..

Well at least you have backup engines there Mr juice..-er I mean Justin. :mrgreen:

you did read the part where he drives a mustang and not a corvette right?:poke:

BIRDMAN
12-15-2012, 02:50 PM
you did read the part where he drives a mustang and not a corvette right?:poke:

Lol I know all too well. He'll gas his car to destruction just to edge out a little ol' corvette. :mrgreen:

1SMKN99
12-15-2012, 02:54 PM
Id blow it up again to win.

DIGGLER
12-15-2012, 03:07 PM
omg gs stripes. im putting gs stripes on my civic damnit.

1SMKN99
12-15-2012, 03:15 PM
omg gs stripes. im putting gs stripes on my civic damnit.

:finger: dont hate, they each add 40hp and 60 torks

white99ta
12-15-2012, 03:21 PM
How you do it? Spraying?

1SMKN99
12-15-2012, 03:22 PM
Trying to show of in azalea lol

Matts94Z28
12-15-2012, 03:33 PM
The stripes are not gs stripes... they markbthe races he has won.

2001hawk
12-15-2012, 03:50 PM
The stripes are not gs stripes... they markbthe races he has won.

Way to kick a guy when he is down Matt. LOL. We all know your kidding. Justin let me know if you need some help.

1SMKN99
12-15-2012, 04:35 PM
Im used to it from him lol. Soo the inatke manifold is full of oil and piston pieces hmmm

2001hawk
12-15-2012, 04:44 PM
Soo the inatke manifold is full of oil and piston pieces hmmm

Been there done that. Actually to be more specific vented side of block right where the oil pan meets damaging both caused by a rod that twisted and then broke about an inch from the wrist pin and again about an inch from the journal. Also one of the other pistons got reduced to the size of gravel. There were also places of missing metal up by the cam, but I don't think it got damaged.

TurboWS6
12-15-2012, 05:14 PM
Been there before, sucks hopefully you will have it back together soon.

RoadconeTuning
12-15-2012, 08:30 PM
Throw in in da gutter and go 'n' buy another...

if the heads are big enough that bitch will MOVE with a 5.0L on the Gas. Is that a smaller Dish too? MOAR COMPRESSIONZ

blkscls1z
12-16-2012, 02:23 PM
Id blow it up again to win.

http://cdn.memegenerator.net/instances/400x/19825995.jpg

1SMKN99
12-16-2012, 02:25 PM
http://cdn.memegenerator.net/instances/400x/19825995.jpg

Lol rep

DolSVT00
12-17-2012, 11:14 AM
Who were you racing?

1SMKN99
12-17-2012, 11:28 AM
nobody. cranked the car up, revved it up a lil and bang.

DolSVT00
12-17-2012, 11:32 AM
nobody. cranked the car up, revved it up a lil and bang.

It had to be hurt already then

1SMKN99
12-17-2012, 11:40 AM
It had to be hurt already then

id assume so, the night before when i was gettin on it kind of rough it was actin out a lil bit

DolSVT00
12-17-2012, 11:46 AM
id assume so, the night before when i was gettin on it kind of rough it was actin out a lil bit

150 shot is a crap shoot, some of them hold up, some dont. I think Brandon shot his for a while with a 125 but he wasn't making the power you were since you had ported heads and cam's.

1SMKN99
12-17-2012, 11:49 AM
150 shot is a crap shoot, some of them hold up, some dont. I think Brandon shot his for a while with a 125 but he wasn't making the power you were since you had ported heads and cam's.

yea im just hoping my heads arent fucked, i'll find out tonight though, pulling the motor first thing when i get off work

slowgreen99
12-17-2012, 12:01 PM
Yeah, I shot 125 because of the intake design horror stories. I got lucky I guess, because it had 145k miles on it, and I shot it everyday.

TurboWS6
12-17-2012, 12:02 PM
yea im just hoping my heads arent fucked, i'll find out tonight though, pulling the motor first thing when i get off work

One side will most likely be garbage. especially if you had aluminum chunks in the intake. Sorry but he havent seen to many heads survive when I motor grenades like this.

DolSVT00
12-17-2012, 12:05 PM
One side will most likely be garbage. especially if you had aluminum chunks in the intake. Sorry but he havent seen to many heads survive when I motor grenades like this.

+1 Ya if you had chunks in the intake, that side didn't survive. I've had one break rods and get stuck in the bore and save the heads but there weren't no chunks in the intake.

slowgreen99
12-17-2012, 12:17 PM
and it could have very easily thrown a chunk or seven to the other side. Thatd be a bad day.

1SMKN99
12-17-2012, 01:50 PM
fawwwkkkk i am not looking forward to opening that motor up..

really dont wanna have to buy another set of ported heads

Matts94Z28
12-17-2012, 02:31 PM
I hope it all goes well for you.


Time for a 5.3 swap!

03SVTCOBRA
12-17-2012, 02:32 PM
fawwwkkkk i am not looking forward to opening that motor up..

really dont wanna have to buy another set of ported heads

4v swap.

1SMKN99
12-17-2012, 02:40 PM
if the heads are fucked up im most likely going to do a 4v swap. itd cost the same if not less than buying another set of ported heads. and if i do go that route ill try to just do a ported eaton on top.

blkscls1z
12-17-2012, 02:44 PM
fawwwkkkk i am not looking forward to opening that motor up..

really dont wanna have to buy another set of ported heads

I know a guy that does good port work for a reasonable price. He just got a flow bench too!

yota
12-17-2012, 02:45 PM
http://www.horsepowerjunkies.com/forums/showthread.php?t=134671

03 cobra motor with 68k
ported blower
billet idlers
bbk coated long tubes
spec flywheel
afco heat exchanger
gauges
motor and body harness
upr k member kit with coilovers
fuel lines

motor is complete blower to oil pan i will include every piece you will need to bolt in and go.great for any type of swap in a mustang

building a big block so i need to sell this stuff will not seperate at this time $7k

1SMKN99
12-17-2012, 02:51 PM
http://www.horsepowerjunkies.com/forums/showthread.php?t=134671

i dont need the shortblock. i already have a dss forged 5.0 shortblock. just need all the shit for up top.

DolSVT00
12-17-2012, 02:53 PM
Just so I know and anyone else asks or wants to do the same, how many times did you shoot it and how many bottles did you put through it?

1SMKN99
12-17-2012, 02:54 PM
I know a guy that does good port work for a reasonable price. He just got a flow bench too!

wow i hadnt even thought about ray, ill have to shoot him a pm.

hopefully by some magical dumb luck the heads will be fine. from up top i didnt see any of the valves to appear totally fawked up, but i guess i wont know til i pull the heads off

1SMKN99
12-17-2012, 02:56 PM
Just so I know and anyone else asks or wants to do the same, how many times did you shoot it and how many bottles did you put through it?

i put 11 bottles through it. and the last 2 times i shot it i sorta kinda put in a 175 shot...:hide: which probably wadnt too smart lol.

2001hawk
12-17-2012, 02:56 PM
i dont need the shortblock. i already have a dss forged 5.0 shortblock. just need all the shit for up top.

5.0?

1SMKN99
12-17-2012, 02:58 PM
5.0?

sorry..5.0 stroker shortblock.

DolSVT00
12-17-2012, 03:00 PM
i put 11 bottles through it. and the last 2 times i shot it i sorta kinda put in a 175 shot...:hide: which probably wadnt too smart lol.

I told you not to do that on pump gas!

2001hawk
12-17-2012, 03:00 PM
i put 11 bottles through it. and the last 2 times i shot it i sorta kinda put in a 175 shot...:hide: which probably wadnt too smart lol.

There is no kinda sorta about that. FWIW the car laid down on gas doesn't usually turn out well.

1SMKN99
12-17-2012, 03:02 PM
I told you not to do that on pump gas!

andddd i learned a valuable lesson...listen to randy lol.

1SMKN99
12-21-2012, 08:14 AM
pulled the whole damn thing out, fawkkk droppin the k member and takin those damn headers off!!

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121220_210117.jpg

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121220_210300.jpg

the opposite side is the same, the two pistons magically disappeared. the heads are all nicked up too.

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121220_225354.jpg

blubyu87gt
12-21-2012, 11:44 AM
Tubular k-member!!!! The hours you have spent going around your ass to get to your elbow could easily make up the cost. How many times have you pulled that thing in the last six months!?!

1SMKN99
12-21-2012, 11:51 AM
Tubular k-member!!!! The hours you have spent going around your ass to get to your elbow could easily make up the cost. How many times have you pulled that thing in the last six months!?!

pulling it out this way the k member wasnt an issue! so ha bish! lol

and this is the 3rd time since july...:mrgreen:

blubyu87gt
12-21-2012, 12:04 PM
Ah got the trans all taken out with it to avoid the removal of the K-member? I can't ser the pix on the computer I'm on. I am waiting for the flywheel to get here and then I am going to be putting the cobra together. It can take its time though. 11 degree nights and 30 degree days makes for quick numbness. Rolled it out and washed it yesterday. Before I could get around to dry it the water had frozen. What. The. Fuck. Lol

Gonna need the kmember for them turbo things you been talking about getting anyway!

1SMKN99
12-21-2012, 01:01 PM
Ah got the trans all taken out with it to avoid the removal of the K-member? I can't ser the pix on the computer I'm on. I am waiting for the flywheel to get here and then I am going to be putting the cobra together. It can take its time though. 11 degree nights and 30 degree days makes for quick numbness. Rolled it out and washed it yesterday. Before I could get around to dry it the water had frozen. What. The. Fuck. Lol

Gonna need the kmember for them turbo things you been talking about getting anyway!

Hopefully gonna have those turbo things on while putting this back together!

1SMKN99
12-21-2012, 01:54 PM
well the heads arent as bad as i thought

http://i1176.photobucket.com/albums/x334/senorsmoothie/1221121105a.jpg

http://i1176.photobucket.com/albums/x334/senorsmoothie/1221121106a.jpg

DolSVT00
12-21-2012, 02:30 PM
Those can be fixed

1SMKN99
12-21-2012, 02:42 PM
Those can be fixed

yea i already talked to Ray. hopefully she'll be at the track next saturday

randy will i need a retune with this new shortblock?

2001hawk
12-21-2012, 02:44 PM
Hard to tell from the pics. Looks like they got peppered and nicked by pieces of the piston. Doesn't quite look just like carbon deposits knocked off. Like I told you before those could be fixed maybe just by smoothing them out, but the heads could be built back up and ported back down if the nicks were considerable.

1SMKN99
12-21-2012, 03:08 PM
Ray said he can fix it so im a little less dicouraged now

DolSVT00
12-21-2012, 03:19 PM
yea i already talked to Ray. hopefully she'll be at the track next saturday

randy will i need a retune with this new shortblock?

Not likely unless the compression ratio changes.

1SMKN99
12-21-2012, 03:20 PM
it will.

BIRDMAN
12-21-2012, 03:34 PM
Thankfully you were only idling when it happened.

1SMKN99
12-22-2012, 12:25 PM
Well i think i found my problem

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121222_111713.jpg

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121222_111543.jpg

DIGGLER
12-22-2012, 12:33 PM
yowch.

adamcs
12-22-2012, 12:33 PM
ls>any ford

blubyu87gt
12-22-2012, 07:11 PM
Well i think i found my problem

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121222_111713.jpg

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121222_111543.jpg

Yep. That will do it. Who needs pistons and rods anyway!? An LSX would have still taken you through race day!

Sent from my HTC6435LVW using Tapatalk 2

adamcs
12-22-2012, 08:14 PM
Yep. That will do it. Who needs pistons and rods anyway!? An LSX would have still taken you through race day!

Sent from my HTC6435LVW using Tapatalk 2

This....and coming from a ford guy

1SMKN99
12-22-2012, 10:51 PM
This....and coming from a ford guy


I didnt disagree lol

adamcs
12-22-2012, 11:05 PM
I didnt disagree lol

Lol oh I know, and I'm talking stock vs stock, but what kind of gm guy would I be if I didn't give you ford guys a hard time?

blubyu87gt
12-23-2012, 01:22 AM
Lol oh I know, and I'm talking stock vs stock, but what kind of gm guy would I be if I didn't give you ford guys a hard time?

2013 GT500 > Chevy

:hide:


Lololol

2001hawk
12-23-2012, 01:30 AM
2013 GT500 > Chevy

:hide:


Lololol

Negative sir. ZR1 or Z06 > any year GT500 stock for stock.

blubyu87gt
12-23-2012, 02:17 AM
Nope. I read on the interwebs that the gt500 is the way most bestest car in US (maybe the entire world!)right now. It has like 6 million hp at 3k rpm you know! You drive a GM so your bias.

Really though it was more of joke thing to Adam about the hype that surrounded it. We would tease about that when it was announced. And since he is poking fun to us Ford guys :)

MonteC
12-23-2012, 11:51 AM
Well i think i found my problem

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121222_111713.jpg

http://i1176.photobucket.com/albums/x334/senorsmoothie/20121222_111543.jpg


http://1.bp.blogspot.com/-x0fZ6YX8PE4/T6DF7MZqkWI/AAAAAAAAHRg/ve628QxEFWc/s1600/youdontsaymeme.png

Lmao.

1SMKN99
01-06-2013, 04:32 PM
Well shed together, running and driving around!