1985 Chevy S10/Built 350 V8/Built Turbo 400 Trans/Lots More

[TLyons90]

Moving on to a different project now so my play toy is up for sale. Click on the link below to my Craigslist ad for all the info and pics on it if interested. Message, call, or text me for anymore questions. Thanks y'all!

http://charleston.craigslist.org/cto/3562073999.html

[oldskoolstang]

That's a good looking S10.

[Blue Skunk]

You just got it. What is wrong with it?

[freek on the street]

got to say that is a nice s10

[TLyons90]

That's a good looking S10.

Thank ya!

You just got it. What is wrong with it?

I know I know, haha. I dont keep things for long ask anyone. Truck runs and drives awesome just not for me and needing the cash. Only 2 things are the factory gauges dont work which I was told it was only a fuse (only thing I havent tried to fix) and no ac/heat but all the internals are there for it to have it.

[ShawnBoyMoody]

The smoothed taillights make me wanna punch someone in the throat. Other than that nice truck.

[TLyons90]

The smoothed taillights make me wanna punch someone in the throat. Other than that nice truck.

Haha I agree! Not my thing either... BTW did you get my message earlier?

[ShawnBoyMoody]

Haha I agree! Not my thing either... BTW did you get my message earlier?

Yes I did. Sorry. No we havent gotten anything done with the VP thing. $2500 buy-in and we aint got the money! Besides that we arent setup to unload a pallet with two drums and 10 pails of fuel on it. No forklift. So, at this point its a no sir.

[TLyons90]

Yes I did. Sorry. No we havent gotten anything done with the VP thing. $2500 buy-in and we aint got the money! Besides that we arent setup to unload a pallet with two drums and 10 pails of fuel on it. No forklift. So, at this point its a no sir.

No worries, I just got asked today about it and figured I would see what was going on. I know for sure for what we want we could throw the money up front to help out with the buy in. Also if need be we have the stuff to unload it and all if some how we worked it out to get dropped off at my work. Thank ya tho!

[Harry]

That was fast. I think you just broke Shawns record for a turn around on a vehicle.

[slowgreen99]

liftgate service....

[1998ta__1991rs]

liftgate service....

Then becomes the problem of putting it into the back of soneones truck

[slowgreen99]

pshh, yall have 2 post lifts! Come on peoples, think!

[TLyons90]

Haha, I'm gonna have to agree with slowgreen... Gotta be smarter than what your working with! :roll:

[TLyons90]

That was fast. I think you just broke Shawns record for a turn around on a vehicle.

I don't usually keep cars/trucks for long. I keep em like I keep my women :bigthumb:

[LXtasy]

I don't usually keep cars/trucks for long. I keep em like I keep my women :bigthumb:

You park your vehicles in the kitchen?

[1SMKN99]

You park your vehicles in the kitchen?

lol rep

[ShawnBoyMoody]

Anywho. Yeah its not like we havent thought of using the lift to load the drums in the back of trucks if need be. (sketchy at best) Liftgate service is usually more expensive than no liftgate. Then we don't have a pallet jack either to get it into the building. So now we are having to unpack the pallet in the alley behind the shop and move 55 gallon drums around by hand. All that to make 5 dollars a pail on C16. So yeah all that is doable BUT that still leaves the 2500 dollar buy in which we just dont have right now (see SCT software and NOS pumping station) so Troy if you wanna get Velocity to cut me a check for 2500 bucks I'll place the order as soon as the check clears. Or they could just become a dealer themselves and cut out the middle man all-together. Just sayin.

[slowgreen99]

Wooden hand truck (skrong) and a small ratchet skrap! Lol. Works like a charm

[TLyons90]

lol rep

HAHAHA thanks queer :Finger2:

Anywho. Yeah its not like we havent thought of using the lift to load the drums in the back of trucks if need be. (sketchy at best) Liftgate service is usually more expensive than no liftgate. Then we don't have a pallet jack either to get it into the building. So now we are having to unpack the pallet in the alley behind the shop and move 55 gallon drums around by hand. All that to make 5 dollars a pail on C16. So yeah all that is doable BUT that still leaves the 2500 dollar buy in which we just dont have right now (see SCT software and NOS pumping station) so Troy if you wanna get Velocity to cut me a check for 2500 bucks I'll place the order as soon as the check clears. Or they could just become a dealer themselves and cut out the middle man all-together. Just sayin.

No worries Shawn. Def a good bit of work and I was just considering getting some to help both y'all and us out. We might end up getting setup and go from there. Thanks tho!

[Matts94Z28]

Wooden hand truck (skrong) and a small ratchet skrap! Lol. Works like a charm

I heard Zac picks things up and puts them down.

[TLyons90]

FIRST $2800 TAKES IT HOME!!! CLEAN TITLE IN HAND!!!

[MustangEater82]

If it runs fine, no noise/smokes leaks, and someone else buys it, and wants to split it up, I will take the engine for $500 from pan to filter :)

[MonteC]

I know I know, haha. I dont keep things for long ask anyone. Truck runs and drives awesome just not for me and needing the cash. Only 2 things are the factory gauges dont work which I was told it was only a fuse (only thing I havent tried to fix) and no ac/heat but all the internals are there for it to have it.

Probably takes two seconds to put a fuse in....

[MonteC]

Yes I did. Sorry. No we havent gotten anything done with the VP thing. $2500 buy-in and we aint got the money! Besides that we arent setup to unload a pallet with two drums and 10 pails of fuel on it. No forklift. So, at this point its a no sir.

I know you guys arent ready for it but when you get your funds up a forklift is a life saver. Paid 3k for the one I have and its worth every penny.