94zson
09-09-2013, 02:02 PM
Gents,
I have decided to sell my car since another baby is coming and I dont have the time for racing due to new job and other obligations.
Below is a quick listing but feel free to ask any questions.
I am also willing to part out but would like to wait to commit due to someone wanting the car.
Engine: Forged HKE 347ci LS1 with TEAStage 3 LS1 cylinder heads, Fast 90mm Intake, Nick Williams 90mm Throttle body, 30lb/hr SVT fuel injectors. MSD 2 step, Harris Speed Works Nitrous Kit
Transmission: Rossler TH-350, Full Manual Reverse Valve body with Rossler Trans brake. ATI 5000 rpm stall converter, with tailshaft for factory speedometer sensor(not mechanical speedo)
Rear End: Moser 9” 35 spline with Detroit Locker, 4.56 gears with disc brakes
Suspension: Full BMR rear race suspension: Lower Control Arms, panhard rod, Xtreme Duty rear Sway bar, QA1 shocks and race springs. BMR Race Torque Arm with crossmember mount, full BMR front race suspension. Manual rack and pinion and steering shaft (stock power currently installed)
Wheels: Bogart D10 race wheels, new Hoosier 28” slicks (5) passes, Mickey Thompson fronts. (car currently sitting on Camaro wheels so not to damage slicks
Chassis: 6point rollcage, Corbeau Racing Seats, factory interior(complete), Hardtop car (front end is currently off while debating to make removable 1pc front end)
Arthur Hopkins, I can be reached at 843-991-5883. There are also additional components not installed but come with car.
Price: $10K
I have decided to sell my car since another baby is coming and I dont have the time for racing due to new job and other obligations.
Below is a quick listing but feel free to ask any questions.
I am also willing to part out but would like to wait to commit due to someone wanting the car.
Engine: Forged HKE 347ci LS1 with TEAStage 3 LS1 cylinder heads, Fast 90mm Intake, Nick Williams 90mm Throttle body, 30lb/hr SVT fuel injectors. MSD 2 step, Harris Speed Works Nitrous Kit
Transmission: Rossler TH-350, Full Manual Reverse Valve body with Rossler Trans brake. ATI 5000 rpm stall converter, with tailshaft for factory speedometer sensor(not mechanical speedo)
Rear End: Moser 9” 35 spline with Detroit Locker, 4.56 gears with disc brakes
Suspension: Full BMR rear race suspension: Lower Control Arms, panhard rod, Xtreme Duty rear Sway bar, QA1 shocks and race springs. BMR Race Torque Arm with crossmember mount, full BMR front race suspension. Manual rack and pinion and steering shaft (stock power currently installed)
Wheels: Bogart D10 race wheels, new Hoosier 28” slicks (5) passes, Mickey Thompson fronts. (car currently sitting on Camaro wheels so not to damage slicks
Chassis: 6point rollcage, Corbeau Racing Seats, factory interior(complete), Hardtop car (front end is currently off while debating to make removable 1pc front end)
Arthur Hopkins, I can be reached at 843-991-5883. There are also additional components not installed but come with car.
Price: $10K