PDA

View Full Version : Stock location Meziere I/C pump bracket


chrisheltra
07-26-2007, 09:47 AM
I have made a bracket to install a Meziere I/C pump in the stock location. A drawing with dimensions is below. You will have to remove the stock pump bracket in order to install the new bracket. The new bracket should be made from 3/8 aluminum or steel. It will install with the two screws that were removed to take the stock bracket out.


http://www.carolinahorsepower.com/Chris/bracket4.jpg

Mike
07-26-2007, 01:47 PM
Cool.