PDA

View Full Version : Performance Diesel, Dyno Day - 9/24/11


1998ta__1991rs
09-24-2011, 06:15 PM
Shawn Boy:

<iframe width="640" height="360" src="http://www.youtube.com/embed/VZ8ahI7Neao" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/ZGK3x4cTXP4" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/9-w9MAws0Hg" frameborder="0" allowfullscreen></iframe>

Zac:

<iframe width="640" height="360" src="http://www.youtube.com/embed/BNskRV_mp14" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/dnKwL3hUKyM" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/tig8Kb6e7T4" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/rFAP-QGsP2Y" frameborder="0" allowfullscreen></iframe>

Jonathan:

<iframe width="640" height="360" src="http://www.youtube.com/embed/o-CInqFVDTI" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/PhSXGSqtbVI" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/ULxHqc-gfAI" frameborder="0" allowfullscreen></iframe>

Rodney/Tyler:

<iframe width="640" height="360" src="http://www.youtube.com/embed/nAOsDxOZBEs" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/hPW2LPMvs6A" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/uH9tfAOK674" frameborder="0" allowfullscreen></iframe>

ForceFed4g63
09-24-2011, 06:22 PM
Nice, numbers?

03SVTCOBRA
09-24-2011, 06:30 PM
Nice, numbers?

grudge racers cant put no numbers FOOL :cheers

ForceFed4g63
09-24-2011, 07:29 PM
grudge racers cant put no numbers FOOL :cheers

Damn how could I forget? Even the tow rigs are grudged on here lol

cmd
09-24-2011, 07:31 PM
It was a good turnout ....all the above trucks put down over 400hp 850ftlbs

LXtasy
09-24-2011, 07:50 PM
Damn how could I forget? Even the tow rigs are grudged on here lol

YES! Yes, they are

BigdaddyDupree
09-24-2011, 08:48 PM
it was a damn good time for sure, ole big red did good for a stock 2500, with a tune.

ShawnBoyMoody
09-24-2011, 09:08 PM
Nice, numbers?

Here is my dyno sheet. Weak sauce.

http://i80.photobucket.com/albums/j164/shawnboymoody/LastScan.jpg

I ended up dynoing the truck twice cause they screwed up on the first run and ran the truck with the fueling box off the for the first three pulls and the truck only made 405 and 867. Ran me shittin cause I knew the truck would break 900 ft lbs. Well the highest torque number of the day ended up being 889 and I couldnt stand it. Paid the 80 bucks to run it again. Got the highest torque of the day at 933 ft lbs. Congrats to Zac who had the highest HP at 501! Carolina Horsepower representing!

BAD BOB
09-24-2011, 09:15 PM
i heard Zacs truck made more hp than his car!

BigdaddyDupree
09-24-2011, 09:16 PM
the red one made 414 and 780. lift pump was ordered tonight then it will be turned up

ShawnBoyMoody
09-24-2011, 09:20 PM
the red one made 414 and 780. lift pump was ordered tonight then it will be turned up

Hells yeah hot damn!

LadyInRed
09-24-2011, 09:48 PM
Might as well add few my pics/vids in here too.

A few pics:

http://i8.photobucket.com/albums/a11/spectraredz/Performance%20Diesel%20Dyno%20Day%209%2024%2011/PerformanceDieselDynoDay001.jpg
http://i8.photobucket.com/albums/a11/spectraredz/Performance%20Diesel%20Dyno%20Day%209%2024%2011/PerformanceDieselDynoDay007.jpg
http://i8.photobucket.com/albums/a11/spectraredz/Performance%20Diesel%20Dyno%20Day%209%2024%2011/PerformanceDieselDynoDay009.jpg
http://i8.photobucket.com/albums/a11/spectraredz/Performance%20Diesel%20Dyno%20Day%209%2024%2011/PerformanceDieselDynoDay020.jpg
http://i8.photobucket.com/albums/a11/spectraredz/Performance%20Diesel%20Dyno%20Day%209%2024%2011/PerformanceDieselDynoDay021.jpg
http://i8.photobucket.com/albums/a11/spectraredz/Performance%20Diesel%20Dyno%20Day%209%2024%2011/PerformanceDieselDynoDay022.jpg
http://i8.photobucket.com/albums/a11/spectraredz/Performance%20Diesel%20Dyno%20Day%209%2024%2011/PerformanceDieselDynoDay017.jpg

Vids are uploading.

LadyInRed
09-24-2011, 10:51 PM
<iframe width="420" height="315" src="http://www.youtube.com/embed/6mkMbjSvW-0" frameborder="0" allowfullscreen></iframe>

<iframe width="425" height="349" src="http://www.youtube.com/embed/lorWzun9iEk?hl=en&fs=1" frameborder="0" allowfullscreen></iframe>

<iframe width="425" height="349" src="http://www.youtube.com/embed/ypIRZ7C6LYU?hl=en&fs=1" frameborder="0" allowfullscreen></iframe>

<iframe width="425" height="349" src="http://www.youtube.com/embed/EwM2bnBddRA?hl=en&fs=1" frameborder="0" allowfullscreen></iframe>

<iframe width="425" height="349" src="http://www.youtube.com/embed/NriX9esTbq4?hl=en&fs=1" frameborder="0" allowfullscreen></iframe>

Too tired to wait for the rest tonight (2 more Mustang ones).

jmd
09-25-2011, 12:31 AM
mustang numbers?

1998ta__1991rs
09-25-2011, 01:17 AM
my truck ended up making 501/856, kinda surprised me, didn't really expect it

csikx
09-25-2011, 09:29 AM
A diesel truck that is putting down 4xx HP and 9xx TQ, what does something like that run in the 1/4 mile? Or are they more of highway roll racers?

ShawnBoyMoody
09-25-2011, 09:30 AM
my truck ended up making 501/856, kinda surprised me, didn't really expect it

Shoont. I knew that thang was makin some powa!

BigdaddyDupree
09-25-2011, 09:32 AM
A diesel truck that is putting down 4xx HP and 9xx TQ, what does something like that run in the 1/4 mile? Or are they more of highway roll racers?
Decent at best. 8's in the eighth

MonteC
09-25-2011, 09:40 AM
A diesel truck that is putting down 4xx HP and 9xx TQ, what does something like that run in the 1/4 mile? Or are they more of highway roll racers?

I believe that truck has run a 9.36, the 5spd just kills the times. While zacs truck is in the mid 8's, automatic.

MonteC
09-25-2011, 09:41 AM
mustang numbers?

Terrible. The good tune didnt load before the dyno pull.

ShawnBoyMoody
09-25-2011, 10:11 AM
I believe that truck has run a 9.36, the 5spd just kills the times. While zacs truck is in the mid 8's, automatic.

This. Manual kills it. I know my truck would run 8.80's or better in the eighth if I swapped in an auto. Its just so damn expensive! It runs alot better from a roll though. It's hard to get 6800 lbs moving from a dig, so quick diesels really moisten me!

I may take it to chessa tonight and try a 3rd gear 3200 rpm launch in four wheel drive and see if I cant bust off a 9.00.

ShawnBoyMoody
09-25-2011, 10:19 AM
I forgot to mention that my boy Colin put down 405 RWHP with his navy blue metallic Z on the "break in" tune! There was a sho nuff race car with a 408 Windsor there that only put down 415 so I was tickled for Colin! Congrats brotha!

LadyInRed
09-25-2011, 10:34 AM
<iframe width="425" height="349" src="http://www.youtube.com/embed/OO9pEezkfSs?hl=en&fs=1" frameborder="0" allowfullscreen></iframe>

<iframe width="425" height="349" src="http://www.youtube.com/embed/po5dFp22n98?hl=en&fs=1" frameborder="0" allowfullscreen></iframe>
The owner of the shop said the last pull was the fastest one he ever saw made on that dyno :lol: [160mph]

Too bad the good tune didn't go through properly before we put it up there. Got stuck in the 87-econo tune.

ShawnBoyMoody
09-25-2011, 10:36 AM
That thing was pullling hard! Wish the tune would have loaded properly! Probably a good thing that turbo mazda guy backed out on racing us lol.

Sean
09-25-2011, 10:51 AM
Did the mustang break up on the top end?

ShawnBoyMoody
09-25-2011, 11:00 AM
Did the mustang break up on the top end?

The dyno guy did a 7000 rpm pull and hit the rev limiter.

Edit: I see what your talking about now, not sure what happened there.

Carlrx7
09-25-2011, 11:06 AM
damn, i thought it was diesels only. but i don't think the car could of made it up that ramp anyways..

03SVTCOBRA
09-25-2011, 11:13 AM
Did the mustang break up on the top end?

Talking about the smoke puffs? I dont think it was breaking up, mine did the same thing when it was on the dyno and everything was fine.

ShawnBoyMoody
09-25-2011, 11:16 AM
damn, i thought it was diesels only. but i don't think the car could of made it up that ramp anyways..

Oh yeah they coulda got it up there. They drive the car up and then it lifts in the rear hydraulically to drive onto the rollers. We actually had about 5 or 6 non diesel vehicles run.

Sean
09-25-2011, 11:19 AM
The dyno guy did a 7000 rpm pull and hit the rev limiter.

Edit: I see what your talking about now, not sure what happened there.

Whats redline on it? Seemed to puff a few times.

LadyInRed
09-25-2011, 11:55 AM
That thing was pullling hard! Wish the tune would have loaded properly! Probably a good thing that turbo mazda guy backed out on racing us lol.

Ugh I wish it had too. Was still fun to put it up there. The numbers alone proved that the econo tune stayed on it rather than the 93-race tune. Now the Mazda people think that is its highest tune numbers though ;) It was a complete night and day difference when we got the right one to load when we tried loading it again after we left. BTW, nice avatar :bigthumb:

The red line is at 7k. Told him to go ahead and take it as far as it'd go on the last pull. It did the same little puff thing last time we dyno'd it too. Everything was fine with it though.

damn, i thought it was diesels only. but i don't think the car could of made it up that ramp anyways..
After we saw a Mazda and an older 5.0 sign up for the dyno, I went home and brought the Mustang back. It *was* a diesel event but they had no problem putting other cars up there.
The hydraulic thing was pretty cool to get the lower cars up there.
http://i8.photobucket.com/albums/a11/spectraredz/Performance%20Diesel%20Dyno%20Day%209%2024%2011/PerformanceDieselDynoDay018.jpg

chrisheltra
09-25-2011, 12:07 PM
Maybe I missed it but what did the mustang put down?

ShawnBoyMoody
09-25-2011, 12:17 PM
Maybe I missed it but what did the mustang put down?

257/257 I believe. That was on the economy tune.

ShawnBoyMoody
09-25-2011, 12:18 PM
BTW, nice avatar :bigthumb:

Thanks!:cheers

LadyInRed
09-25-2011, 12:44 PM
257/257 I believe. That was on the economy tune.

You are correct.

Gotta go get it dyno'd again in the near future, and be certain that the higher tune goes through. At least the driveshaft held up! :lol:

csikx
09-25-2011, 01:20 PM
Damn, Mustang got that V6 right.

Didn't the 4.6 Mustangs dyno in the 220's stock?

MonteC
09-25-2011, 01:55 PM
It put down much better than that at HHP.

chrisheltra
09-25-2011, 02:35 PM
It put down much better than that at HHP.

On the performance tune?

MonteC
09-25-2011, 03:05 PM
Yeah.

ForceFed4g63
09-25-2011, 04:39 PM
How much does the stang weigh?

CINDERBLOCK
09-25-2011, 05:33 PM
Here is my dyno sheet. Weak sauce.

http://i80.photobucket.com/albums/j164/shawnboymoody/LastScan.jpg

Ohh sh!t some Nice numbers there! Whats that silver truck gunna give this silver truck?

MonteC
09-25-2011, 05:53 PM
How much does the stang weigh?

Maybe 3400.

ShawnBoyMoody
09-25-2011, 06:46 PM
Ohh sh!t some Nice numbers there! Whats that silver truck gunna give this silver truck?

Lol. Match my weight and I'll show you this:

http://i80.photobucket.com/albums/j164/shawnboymoody/305704_10150828302120252_735700251_21117684_518458 437_n.jpg

Seriously tho, thanks! I was hoping for 1000 ft lbs but it was not to be. Maybe next time.

CINDERBLOCK
09-25-2011, 06:56 PM
LOL Load the bed of the L down with bricks!

MonteC
09-25-2011, 06:59 PM
At least you wont have traction problems.

ShawnBoyMoody
09-25-2011, 07:29 PM
Lol troof!

98nbmz
09-29-2011, 10:28 AM
<iframe width="420" height="315" src="http://www.youtube.com/embed/vkJSD-HDgGY" frameborder="0" allowfullscreen></iframe>

ElecTech
09-29-2011, 10:41 AM
Are all of these numbers uncorrected? ShawnBoy's graph is uncorrected so I was curious if all of these are uncorrected.

ShawnBoyMoody
09-29-2011, 10:45 AM
Yes they were all uncorrected. I saw both numbers on mine, corrected was within 5 HP and 10 ft. lbs.

cmd
09-29-2011, 11:02 AM
<iframe width="420" height="315" src="http://www.youtube.com/embed/vkJSD-HDgGY" frameborder="0" allowfullscreen></iframe>

This guy was pretty funny... he was tanked at 5 in the afternoon. The previous night he did the same thing and DESTROYED two 20 in MT mud tires to the tune of about $750 Those were John's stock tires on the rear of that video

ElecTech
09-29-2011, 12:20 PM
Yes they were all uncorrected. I saw both numbers on mine, corrected was within 5 HP and 10 ft. lbs.

What correction type was it? SAE or STD.

jmd
09-29-2011, 12:53 PM
you know shawnboymoody is STD all the way.

ShawnBoyMoody
09-29-2011, 01:50 PM
What correction type was it? SAE or STD.

SAE I believe? Why you axe?

ShawnBoyMoody
09-29-2011, 01:51 PM
you know shawnboymoody is STD all the way.

And you know this, man!

ElecTech
09-29-2011, 02:13 PM
SAE I believe? Why you axe?

Perspective.

jmd
09-29-2011, 02:20 PM
you know shawnboymoody is STD all the way.

And you know this, man!

just rumor on the street. :poke: