Anyone have an upper pulley removal tool
 

Does anyone have the tool to removel the upper pulley? and can i borrow it if i get a new pulley?

Jeff (jeffEvo) does. I borrowed it from him a few weeks ago.

SWEET..Looks like I'll order it then...get a few more pounds out of her...thanks

I'd start looking to get power else where. Your spinning that Eaton pretty fast already with that 8lb Lower.

+1 There are plenty of other mods to get power from.

WELL I WAS THINKING OF JUST GOING TO THE 2.8 WITH THE SLOTS CUT IN IT TO GRIP. BUT I FOUND A DRY NITROUS KIT FOR $269 FROM DYNOTUNENITROUS.COM AND GIVE IT A 25 SHOT AND GET 75-100HP OUT OF IT. FOR UNDER 300 BUCKS YOU CANT BEAT THAT. I KNOW I NEED THE THROTTLE BODY AND UPPER INTAKE, ELECTRIC FAN AND WATER PUMP WOULD ALL HELP BUT MAN THATS EXPENSIVE.

Ask LightningMike about nitrous, and his was a wet kit.

Id ditch the 8#, and get a 6# with a ported blower see how that works for you. Then add juice to it later. Or you can just save up and get a KB or Whipple.

DOES ANYONE AROUND HERE PORT THE BLOWER? AND HOW MUCH?
LOOKING FOR THE MOST BANG FOR THE BUCK. I KNOW IM GOING TO NEED TO SACE UP AND BUILD A BLOCK BEFORE TO LONG...ISNT THE LIMIT 450-500 TO BE SAFE?

Stiegmeyer(sp) ports blower its around $500. There is also someone on here that has an extra blower you can probably borrow. If he doesnt mind he will probably PM you.

THAT WOULD DIFFERENTLY BE AN IDEA PORT IT AND GET THE BIG INTAKE STUFF. NOW WHY DO YOU THINK I NEED TO GET RID OF THE 8LB ..I GOT HEAT COVERED WITH THE BIG INTERCOOLER

:lol: Thats spinning the Eaton too fast, you will probably get more horsepower with a 6lb and a better tune

Meet up with Chris, and you 2 go to the track. Together you guys should make 2-3 back to back runs. That way you can see how much E.T. you loose after each run compared to someone who has a 6lb.

I'm very interested in the results, and that way you will have a real world comparison.

Like mike said I will be at Dorchester tomorrow at 7:00 Pm if you want to come out and run them and compare a 6# w/ port, and a 8#.

how much boost are you making chris? and you are relatively the same setup as me just with 6lber?

All I have is the stock boost guage but I should be around 15-16#

see thats what i thought and when we dynoed it in va, it was 95 in a garage it was making 13 across the board witht he 8lb lower. i thought it would have been more like 16

HOW CROWDED IS THE TRACK ON FRIDAY NIGHTS?

Not nearly as crowded as it is on Sun. There is usually no more than about 50 cars on Fri.

OK AND IT OPENS AT 6PM ... IM GONNA TRY AND MAKE IT AS CLOSE TO OPEN AS I CAN GOT TO GO HOME AND CHANGE THEN HEAD OVER FROM MT P