Nitrous /Fuel
 

Any guys on here that run a lot of nitrous aim for a certin N/F ration? Just looking to see what a few others are running.....

lean is mean!

12.5-13.0 a/f

But I read plugs.
I am at a 3:1 ratio. fuel injected spread is almost 52.Plate kit

Every setup is different though

I can't measure N/F but I have heard from 6 to 1, to 8.5 to 1.

you dont measure...it is a caulcation......we run most of our stuff in the high 6 to mid 7 range on bigger motors....450+ CI...but for the smaller motors seems to run better a litte fatter........high 5 to 6....just wanting to get a feel for other motors and what peopleare running......

to figure you need bottle pressure, fuel pressure and jet sizes.......

http://www.robietherobot.com/nitrousjetcalculator.htm

good starting point

that a ok program, but it is more for hobby racers and not so much serious cars...it does not allow you to adjust for what target N/F your car runns best at, and it is running a fixed n/f or about 6......we use Dave Koehler's nitrous master software........His program allowes you to use a correction factor after you have your stuff flowwed

the more I look at that app, it really is for people just starting out.....there is no way to account for the different fuel....

lean is mean, rich is a bitch, and right you take flight