Carolina Horsepower

Carolina Horsepower (http://www.balatrons.com/forum/index.php)
-   Events (http://www.balatrons.com/forum/forumdisplay.php?f=12)
-   -   Dyno Day April 11th at LS-1 Tuning (http://www.balatrons.com/forum/showthread.php?t=2852)

wsa111 03-06-2009 09:31 PM

Dyno Day April 11th at LS-1 Tuning
 
Sponsored by SMAF. Need 15-20 cars for testing.

Yes their air fuel checker works & is calibrated daily.

The cost is $50.00 for two runs which include air-fuel ratio test.

The runs will start at 9:00 on saturday morning of april 11th.

All strapping down of vehicles will be done by ls1 tuning personnel.

I will handle regestration on line via e-mail. Replys will be taken in order when received.

First to reply will be tested in order received.

Bill Ambler DenaAmbler@aol.com

My phone # is 843-860-9000.

Magoo 03-06-2009 09:37 PM

Hey SMAF is going to use a good dyno finally!!!!!

LXtasy 03-06-2009 10:48 PM

Holy hell, the world must coming to an end.


Can you register day of as well? reason why I ask is I am unsure if my truck will be done by that time.

Pesce Nero 03-06-2009 11:22 PM

will there be free mt dew?

wsa111 03-06-2009 11:27 PM

Dyno Run April 11th @ LS-1 Tuning
 
Magoo, you better believe this is the real mccoy.

I'm sick & tired of testing on junk equipment.

Thats why i'm going to run this deal from start to finish.

Jr. yes you can register the day of testing, but the earlier i get a list set up i can gage when your time for running will be.

I would like 15-20 vehicles to test, that will give Lorenz a chance to make a buck & give the guys testing an organized idea of the time of testing, rather than 30 guys show up & have no organazation. Thanks Bill

Yes there will be pizza & drinks available.

LXtasy 03-06-2009 11:33 PM

Thanks Bill. I won't know of course until the time gets near. It gives me a month, which somehow I doubt will be ready in that time frame. NEVER KNOW.

08 Racecraft 03-07-2009 02:22 AM

sorry my stock race racecraft can't may it

Illusions 03-07-2009 11:26 AM

My "stock" Xtreme Blazer will be there for sure. It probably will get around 160 rwhp and run rich as hell. :( Still waiting for Jamie of Charleston Speed to return from the sandbox.

Magoo 03-07-2009 12:46 PM

Quote:

Originally Posted by wsa111 (Post 34648)
Magoo, you better believe this is the real mccoy.
.



Good to hear, I might go ahead and throw it on the dyno for shits and giggles....

chrisheltra 03-09-2009 08:37 AM

Can a front wheel drive vehicle be dynoed at this facility?

A friend wants to know.

minytrker 03-09-2009 09:23 AM

Quote:

Originally Posted by chrisheltra (Post 34714)
Can a front wheel drive vehicle be dynoed at this facility?

A friend wants to know.


Yes, as long as its front and not awd.

chrisheltra 03-09-2009 09:46 AM

Quote:

Originally Posted by minytrker (Post 34715)
Yes, as long as its front and not awd.

Thanks

Audie1 03-11-2009 02:02 PM

Where is this dyno facility located at?

slowgreen99 03-11-2009 02:54 PM

Quote:

Originally Posted by Audie1 (Post 34808)
Where is this dyno facility located at?

Bryhawke Circle off of Cross County Road.
LS1powertuning.com

79bluebird 03-11-2009 03:36 PM

i would like to bring my s10 but i have yet to finish the body work. but the v8 is in so i may just bring it anyways can you pay day of tuning?

Matts94Z28 03-11-2009 03:42 PM

I will be attending... I would like to see if the numbers have improved since I have made a few changes... maybe even spray it if all goes well.

wsa111 03-11-2009 09:09 PM

Can Pay The Day of dyno run
 
Yes, you can pay the day of the dyno run.

Remember pre-registered will go first & then first come first serve.

Thanks guys for your interest, V/R Bill Ambler VP SMAF

Pesce Nero 03-11-2009 10:17 PM

i hope to be there.

wsa111 03-31-2009 10:40 PM

Dyno Day @ LS-1 Tuning April 11'th
 
Don't forget SMAF needs your support in making this a productive session.

After the dyno runs i hope i can get some of the guys to the track. Thanks Bill

LXtasy 03-31-2009 11:01 PM

I hope to be there. Waiting on the motor to get here. Days are numbered but hopefully we can get it completed by than and make some passes on the rollers. :D


All times are GMT -4. The time now is 03:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.