Double Flaring
 

Is there a place that I can take some brake lines to and have the double flared, or does anyone locally have a metric double flare kit and is good at using it? Thanks for the help,

Mike

I have a SAE double flare kit and I rented a metric single flare kit from Auto Zone. The problem I am having is getting the brake line to tighten enough in the bar clamp. Every time I start the flare, it just pushes the line back? Any tips would be appreciated.

did you come in oreillys in gc today? had a guy looking for that

Did he look like this?

http://i47.photobucket.com/albums/f1.../gingerjew.jpg

Sure did.

i wasnt the guy that helped you i was over at the paint counter. names tyler or t dog. lol

Double Flaring Tools
 

I have 3 Sets of these tools Call me and I will loan you one 696-7004 Mitch( Or bring it to me and I will do it for you.

I have had the problem of the tubing slipping in the bar clamp before, too. A trick you can do is to scotch-tape a single layer of sand cloth to the od of your tubing with the sandy side towards the tubing. Then install your bar clamp and dare it to slip again!

I always have to do 3/8" tubing that way. My tool does 5/16" for the most part without slipping.

HaHaHa http://www.youtube.com/watch?v=1084Ly_nChQ

Sry. Off topic, I know.

reminds me of Kenny Powers. Funny kid!

buy one of these, theyre badass

http://www.buy.com/prod/mastercool-7...210431568.html

Did ZAC Just say something?

no, i typed it

that is my next investment for work. it can be had for a hair cheaper. i have used one and it is bad ass for sure

I have been eying that kit ever since it hit the tool catalogs. It is definitely on my dream list if I get lucky and win a lottery or something like that.

Expensive, but it looks like it is the shiz-nit of anything you would ever want to do with automotive tubing.