pics i promised hal and rob
 

Fbody lines to the left.

http://i29.photobucket.com/albums/c2...8/Zi6_9085.jpg


Hal after looking at them im not sure if they are smaller.

http://i29.photobucket.com/albums/c2...8/Zi6_9086.jpg

http://i29.photobucket.com/albums/c2...8/Zi6_9087.jpg

I will compare them later Derek. Are they stock f-body fans

yes from my 2000

if he dont want them i would be interested in the fans

I am trying to compare the depth on them to the lt1 fans.

Got a LS fan set at the shop I was saving for mine, if you want a test fit. May end up selling them if they won't fit with the turbo kit, but you can see if they will work before you purchase something.

I believe the ls fans and the lt1 fans have the same dimensions. the housing is is just configured differently. they should both be 4.5" in depth. I know i was looking at both setups for the blazer. the fans are also 12" dia.

I was just trying to give him an idea of the depth. Zac thought the thinner profile might help his cramping problem. I still need these but if i run across some i will let you know.

He needs Midol for that.

I tried putting midol in the radiator. But it is still cramped. Or Cramping per derek

cramping to keep it current, shit keeps poppin up in there. Thought I saw the 5.3 trying to grow a compressor while we where there!

That was because you were around and the water pump wanted your soft hands all over it again

:hysterical: :hysterical: :hysterical: :hysterical: :hysterical: :hysterical: :hysterical: I do miss it so :cry1: