WTB: Stock S-10 Blazer Springs
 

Looking for a set of stock S-series 2WD V6 Blazer front springs. Let me know what ya got.

lkq has a few of these trucks in the pick a part lot

But that takes effort.

That is good to know, though. LKQ was going to be my next step.

Are you taking the lowering springs off your truck? If so we can trade.

Taking the fronts off and then probably the blocks off the rear. Keeping the ZQ8's in the rear. Think I'm going to use cut-down stock coils for the front. I can't find an inexpensive spring that sits right and is stiff enough for my taste so I think I'll give this a try.

I'll caution you on the fronts, they are a little soft for a V6 Blazer. I think they are more suited for at least a truck and maybe better for a 4 cyl truck.

I'm fine with a trade.

Try a G body v8 front spring. It should be the same thing. I know the brakes are the same. It will be stiffer but you will have to trim it down some so the blazer isnt all jacked up. They have a couple v8 G body at LKQ.

I have stock Lightning spring........Just sayin :)

I have what you need MR. Jaime. I am fine with a softer spring especially on the regular cab project.

Ok. stop by and we can work out the details.