I'm parting the car out minus the motor and trans related items to put into my new project, a 1969 Chevelle. Plans are for a set of the s366's, a2w setup, and fast xfi.
I don't want to ship the larger items such as the rear or kmember.
Prices do not include shipping or paypal
-Buy multiple items to save on shipping or pickup!
TWIN TURBO 1998 Camaro z/28 partout
Drivetrain:
-BMR adjustable tunnel mounted torque arm black in color $250
-Driveshaft Safety Loop $90
-Spohn Drag Bar $350
Fuel:
-Nasty Fuel tank, -12 sump, two -10 holes for vent/return, fuel sender for 1998, no fittings included $525
Roller:
-98 z/28 84k, 10pt MS cage TIG welded, Stroud window net, a/c delete, wiring relocated, battery relocation, no engine harness, stock pewter hood
Other:
-NEW Kirkey weld in seat brackets driver and passenger $50
Wheels/tires:
-15x9 Centerline Convo Pros with 28x10.5 M/T with 10 passes and 15x4 Centerline Convo Pros with cheapo tires $800
This kit is a KYTP before he became a fuck hole. Things that will need to be done to make this work: relocate alternator, relocate power steering lines, relocate battery, aftermarket kmember (I used BMR turbo kmember), relocate wiring, have -10 bungs welded or drill and tap oil pan, modify frame to allow for oil drainage, stand up the radiator, pusher fans, wideband. So if you aren't willing to do any of that, then don't bother with this kit. I removed the entire kit in 2.5 hours, it's not hard once that stuff has been done.
-Eboost2 40psi version $375
Twin turbo kit:
-hot and cold side need your own truck manifolds, includes JGS wastegates and BOV
-Treadstone air to air intercooler
-Twin turbonetics 6665’s have only 6 passes on them still under warranty and will send with the original boxes
-Air filters
-Oil feed and -10 drain lines
-devils own meth injection kit
-synergy 2 step
-nice turbo blankets
$4500 picked up
SOLD:
-Camaro front bumper support $150
-Rear DA Viking shocks $300
-Flaming river manual rack and pinion with the bump steer kit bolts to factory location $550
-repined 98 harness for 0411 pcm $200
-BMR turbo K-member factory mounts hammertone in color $475
-FIC2000 high impedance injectors $850
-Adjustable Panhard bar $80
-Adjustable LCA’s $90
-BMR th400 cross member hammertone in color $125
-Front DA VariShocks $425
-BMR Lower A-Arms hammertone in color $375
-Moser 9” from brutespeed, spool, 35 spline, 3.25 gears, nodular iron center section, drain plug, ARP extended studs, stock brakes $1900 or $1700+ stock rear