Quote:
Originally Posted by 04ctd
valve seals?
who wants to do them for me?
I'll buy the pizza...the cheap pizza, that is....
|
If its not continuious, it will do it with new seals. The pcv is routed into the intake on the 4.6's they all smoke a lil on startup from residual oil built up in the intake manifold.
Its not easy to change valve seals while its in the car, you need a few special tools if you have PI heads,and you have to take the timing cover/chains off, cam's out, remove the valve springs, retainers and locks, keep pressure on the valves so that they don't drop, then pull the seals out and replace them. Its almost easier to pull the heads off when your that far.