I know the car is probably twisted to an extent since I raced it for 2-3 years on and off w/out the fame connectors. I don't think the relocation brackets or the frame connectors are to blame since it is a straight forward install, plus it was all installed at ride height on a rack. So I have ruled that out. The only thing I can think of is that the stock spring is getting sloppy, I know they make a drag bag for that side to diminish body roll and such. Then again, if it's not the spring, it could be the old bushing binding up in the control arm since they are 15 years old and I have never greased them. I will get out there and swap the springs, re-torque the control arm bolts at the bracket while at ride height and grease everything up.
I wonder if the removal of the front sway bar had anything to do with it... doubtful, but possible.
Here is what the bracket's look like...
