spearco air.water

s14.5gonewide · 09-20-2009, 07:05 PM

m selling a Spearco full custom A/W TMIC.. This IC is a one off custom fabed by Fast Lane Motorsports.. This setup will use ice water to cool the IC and has a drain fitting to release unused water and utilizes a vented cap to fill the resevoir with ice water.. The water core will hold about 4 Gallons of ice water.. The measurements are 27x12x20 (length X width X height).. The IC core is 5" thick.. The endtanks have 3" piping that can be fabed for your setup

850.00 obo.. will deliver

slow04 · 09-20-2009, 08:08 PM

Bo, for $850 you better send a couple hookers with it...

s14.5gonewide · 09-20-2009, 08:10 PM

considering i payed over 1,000 i think the price is very fair..
this is a big boy ic not a street car setup.

WWhittle · 09-21-2009, 04:55 PM

Nice tank and probably a good price but i can't imagine trying to stuff ice through that little cap.

s14.5gonewide · 09-21-2009, 05:12 PM

we usually use bags of ice.. bring 2 coolers.. fill with ice at the gas station.. let it melt a lill top it off with ice at the track make 2/3 passes depending on weather.. drain half... than top off with 2 bags of ice..

once u drop the ice and break it up cut a corner in the bag it falls right in... from my experience..

thx 4 the response tho.. i feel it is a very good price.. i have seen the core go for what i am asking for the whole unit.. i am sure your ic was a pretty penny.

WWhittle · 09-21-2009, 05:20 PM

Quote:

Originally Posted by s14.5gonewide

we usually use bags of ice.. bring 2 coolers.. fill with ice at the gas station.. let it melt a lill top it off with ice at the track make 2/3 passes depending on weather.. drain half... than top off with 2 bags of ice..

once u drop the ice and break it up cut a corner in the bag it falls right in... from my experience..

thx 4 the response tho.. i feel it is a very good price.. i have seen the core go for what i am asking for the whole unit.. i am sure your ic was a pretty penny.

That makes sense- good luck with selling it. You might want to post it on Yellowbullet.com, not sure if you are familar with that site, but it gets tons of traffic.

s14.5gonewide · 09-21-2009, 05:39 PM

i have actually seen it.. their was a thread started semi recently about a shop called fast lane in murrells innlet sc.. he actually did quite a bit of work to my last project car.
http://www.yellowbullet.com/forum/sh...ne+motorsports

WWhittle · 09-21-2009, 05:42 PM

Quote:

Originally Posted by s14.5gonewide

i have actually seen it.. their was a thread started semi recently about a shop called fast lane in murrells innlet sc.. he actually did quite a bit of work to my last project car.
http://www.yellowbullet.com/forum/sh...ne+motorsports

I believe i made a post in that thread. Lane jerked off a buddy of mine for a couple of weeks before we went and picked up the car.

s14.5gonewide · 09-21-2009, 06:10 PM

dosn't suprise me.

09-20-2009, 07:05 PM	#1
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	spearco air.water m selling a Spearco full custom A/W TMIC.. This IC is a one off custom fabed by Fast Lane Motorsports.. This setup will use ice water to cool the IC and has a drain fitting to release unused water and utilizes a vented cap to fill the resevoir with ice water.. The water core will hold about 4 Gallons of ice water.. The measurements are 27x12x20 (length X width X height).. The IC core is 5" thick.. The endtanks have 3" piping that can be fabed for your setup 850.00 obo.. will deliver

09-20-2009, 08:08 PM	#2
slow04 Oink! M-ther F-cker Join Date: Jan 2007 Location: pimlico Posts: 1,126	Bo, for $850 you better send a couple hookers with it... __________________ match my weight and I'll show you this^^^ www.darylsmithdrywall.com

09-20-2009, 08:10 PM	#3
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	considering i payed over 1,000 i think the price is very fair.. this is a big boy ic not a street car setup.

09-21-2009, 04:55 PM	#4
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	Nice tank and probably a good price but i can't imagine trying to stuff ice through that little cap.

09-21-2009, 05:12 PM	#5
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	we usually use bags of ice.. bring 2 coolers.. fill with ice at the gas station.. let it melt a lill top it off with ice at the track make 2/3 passes depending on weather.. drain half... than top off with 2 bags of ice.. once u drop the ice and break it up cut a corner in the bag it falls right in... from my experience.. thx 4 the response tho.. i feel it is a very good price.. i have seen the core go for what i am asking for the whole unit.. i am sure your ic was a pretty penny.

09-21-2009, 05:39 PM	#7
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	i have actually seen it.. their was a thread started semi recently about a shop called fast lane in murrells innlet sc.. he actually did quite a bit of work to my last project car. http://www.yellowbullet.com/forum/sh...ne+motorsports

09-21-2009, 06:10 PM	#9
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	dosn't suprise me.