th350 long tail

DIGGLER · 04-11-2014, 07:25 PM

looking for a th350 with the 9" tailshaft, converter, and some sort of shifter.
just wanted to see if someone had this stuff laying around by chance....

Jimmyz18 · 04-20-2014, 12:14 PM

I have 4 TH350's laying around......1 just went through by Gerald, deep pan, pro trans brake, manual reverse pattern, J&W bell to bolt to SBF, 1 is more of a street/strip trans, manual reverse pattern, no brake, needs pan gasket, and 2 that I know nothing about, so they are pretty much cores.....not sure if they are long or short tail...I'll have to measure

DIGGLER · 04-20-2014, 12:30 PM

lemme know! i may be interested. tail shaft would need to be 9", i believe. i'll be bolting it to a sbc, and i don't really need a trans brake on it.... nothin fancy. i was just hoping to find something that didn't need a rebuild and i could just toss it in the car.

ShawnBoyMoody · 04-20-2014, 01:25 PM

Long shaft Th350's with racing converters are commonly referred to as a "drag pack" type setup.

Jimmyz18 · 04-20-2014, 01:47 PM

They are all short tailshafts...6". Sorry.

ShawnBoyMoody · 04-20-2014, 02:06 PM

What do you want for the one with the trans brake without the jw bell housing out of curiosity?

Jimmyz18 · 04-20-2014, 02:48 PM

No brake on that one. It's actually came out of the 4 eyed red car you sold Terry

ShawnBoyMoody · 04-20-2014, 03:01 PM

Sorry I meant I'm interested in the one with the brake but can't use the Ferd bellhousing. The one I sold Terry is a damn good'un. Busted many a head with that tranny.

Jimmyz18 · 04-20-2014, 03:07 PM

$1500 for that. I have the driveshaft for it to fit a Mustang too. I also have a Cameron converter for a Ford.

DIGGLER · 04-20-2014, 03:53 PM

correct, i need a drag pack th350 for a gm vehicle. thanks for lookin', jimmy.

GreebeanZ28 · 04-20-2014, 05:01 PM

I got a dragpack edition t56.

ShawnBoyMoody · 04-20-2014, 05:04 PM

Quote:

Originally Posted by Jimmyz18

$1500 for that. I have the driveshaft for it to fit a Mustang too. I also have a Cameron converter for a Ford.

Wonder if said drive shaft would fit my moostang.

ShawnBoyMoody · 04-20-2014, 05:08 PM

How much for the one out of the freak?

Jimmyz18 · 04-28-2014, 01:21 PM

Quote:

Originally Posted by ShawnBoyMoody

How much for the one out of the freak?

Sorry man, didn't see your reply til now....I don't always get notifications from here.....$300 for the one out of the freak.......the drivshaft I have for the other trans came out of my old car, it should fit......call or text me if you like, it'll be easier, 203-206-0221

04-11-2014, 07:25 PM	#1
DIGGLER Senior Member Join Date: Aug 2012 Posts: 1,458	th350 long tail looking for a th350 with the 9" tailshaft, converter, and some sort of shifter. just wanted to see if someone had this stuff laying around by chance.... Last edited by DIGGLER; 04-11-2014 at 09:31 PM.

04-20-2014, 01:25 PM	#4
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	Long shaft Th350's with racing converters are commonly referred to as a "drag pack" type setup. __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

04-20-2014, 02:06 PM	#6
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	What do you want for the one with the trans brake without the jw bell housing out of curiosity? __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

04-20-2014, 03:01 PM	#8
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	Sorry I meant I'm interested in the one with the brake but can't use the Ferd bellhousing. The one I sold Terry is a damn good'un. Busted many a head with that tranny. __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

04-20-2014, 05:01 PM	#11
GreebeanZ28 Senior Member Join Date: Oct 2011 Location: Easley Posts: 2,300	I got a dragpack edition t56. __________________

04-20-2014, 12:14 PM	#2
Jimmyz18 Senior Member Join Date: Aug 2010 Location: Ladson Posts: 734	I have 4 TH350's laying around......1 just went through by Gerald, deep pan, pro trans brake, manual reverse pattern, J&W bell to bolt to SBF, 1 is more of a street/strip trans, manual reverse pattern, no brake, needs pan gasket, and 2 that I know nothing about, so they are pretty much cores.....not sure if they are long or short tail...I'll have to measure

04-20-2014, 12:30 PM	#3
DIGGLER Senior Member Join Date: Aug 2012 Posts: 1,458	lemme know! i may be interested. tail shaft would need to be 9", i believe. i'll be bolting it to a sbc, and i don't really need a trans brake on it.... nothin fancy. i was just hoping to find something that didn't need a rebuild and i could just toss it in the car.

04-20-2014, 01:47 PM	#5
Jimmyz18 Senior Member Join Date: Aug 2010 Location: Ladson Posts: 734	They are all short tailshafts...6". Sorry.

04-20-2014, 02:48 PM	#7
Jimmyz18 Senior Member Join Date: Aug 2010 Location: Ladson Posts: 734	No brake on that one. It's actually came out of the 4 eyed red car you sold Terry

04-20-2014, 03:07 PM	#9
Jimmyz18 Senior Member Join Date: Aug 2010 Location: Ladson Posts: 734	$1500 for that. I have the driveshaft for it to fit a Mustang too. I also have a Cameron converter for a Ford.

04-20-2014, 03:53 PM	#10
DIGGLER Senior Member Join Date: Aug 2012 Posts: 1,458	correct, i need a drag pack th350 for a gm vehicle. thanks for lookin', jimmy.

04-20-2014, 05:08 PM	#13
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	How much for the one out of the freak? __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"