stock LS9 twin disk

RoadconeTuning · 04-15-2013, 05:19 PM

anyone driven one? how does it compare to other stock clutches? what about aftermarket stuff? Katech sells this kit with a custom flywheel so it'll work with everything else since the LS9 has an extra flywheel bolt. its 8lbs lighter than a LS7 clutch/flywheel package and 800tq holding with "stock engagement"

http://store.katechengines.com/ls9x-...-gxp-p240.aspx

ForceFed4g63 · 04-15-2013, 05:29 PM

AverageJoe · 04-15-2013, 05:50 PM

My monster stg 3 cost half that, with the lighter flywheel. I did have some chatter during the break-in period, but none now.

LXtasy · 04-15-2013, 05:58 PM

joe, that is because it is rusted to the flywheel now

Carlrx7 · 04-15-2013, 06:59 PM

with the cost of the clutch, there are a lot of good choices to chose from.

I ended up going with the RPS Street twin carbon. Seems to be holding up well.

Quote:

Originally Posted by LXtasy

joe, that is because it is rusted to the flywheel now

many reps!

-Carl

Miker · 04-15-2013, 07:04 PM

Better options for the cost.

GreebeanZ28 · 04-15-2013, 07:24 PM

I bought 2 used exedys for half that.

RoadconeTuning · 04-15-2013, 09:11 PM

everyone i've seen with a single disk clutch for an ls motor has spent a grand for it and had an on/off switch.

Quote:

Originally Posted by GreebeanZ28

I bought 2 used exedys for half that.

buying your used one that needs rebuild w/ parts is about the same price as a new LS9X or RPS clutch... its still an option but i'm just seeing if anyone has used it.

ElecTech · 04-16-2013, 10:23 AM

I've driven a 2010 Camaro that had a stock LS9 clutch and the Lingenfelter adapter flywheel. Butter smooth.

I may have a line on a brand new take-off LSA clutch, if interested.

ElecTech · 04-16-2013, 10:28 AM

Quote:

Originally Posted by RoadconeTuning

everyone i've seen with a single disk clutch for an ls motor has spent a grand for it and had an on/off switch.

Agree. I haven't driven a single that had good capacity that didn't have a crazy stiff pedal or on/off engagement.

Some people like a stiff clutch pedal. I hate it. I guess its mental that to grab it must be stiff, but nowadays thats not always the case.

1998ta__1991rs · 04-16-2013, 10:33 AM

Quote:

Originally Posted by ElecTech

I guess its mental that to grab it must be stiff, but nowadays thats not always the case.

no homo

ElecTech · 04-16-2013, 10:59 AM

Quote:

Originally Posted by 1998ta__1991rs

no homo

Ha! Giggety.

GreebeanZ28 · 04-17-2013, 09:25 AM

Quote:

Originally Posted by RoadconeTuning

buying your used one that needs rebuild w/ parts is about the same price as a new LS9X or RPS clutch... its still an option but i'm just seeing if anyone has used it.

Half that amount you mean. And its not used, its previously loved. Just means its proven to do fucking work sonS.

RoadconeTuning · 04-17-2013, 09:30 AM

Quote:

Originally Posted by GreebeanZ28

Half that amount you mean. And its not used, its previously loved. Just means its proven to do fucking work sonS.

make sure its a GT04SD and i'll see where i can get parts from, last i looked thats one of the few that exedy makes you special order stuff for.

REDRAGTOPRS · 04-18-2013, 09:24 AM

My base model vette has a LS9 ZR1 clutch in it. I love it. It grabs like no tommorow! But then again, it's just a measly base model vette.....

Matts94Z28 · 04-15-2013, 07:31 PM

Why

03SVTCOBRA · 04-15-2013, 08:07 PM

can i have the stock one when you take it off? I need to sail it.

GreebeanZ28 · 04-15-2013, 08:53 PM

Quote:

Originally Posted by 03SVTCOBRA

can i have the stock one when you take it off? I need to sail it.

Lol

Carlrx7 · 04-15-2013, 09:01 PM

i have a stock ls2 you can sail*...

don't pay attention to the line below.
*by taking free clutch you agree to pay 40k for my tt corvette

FRDnemesis · 04-17-2013, 09:09 AM

Quote:

Originally Posted by RoadconeTuning

anyone driven one? how does it compare to other stock clutches? what about aftermarket stuff? Katech sells this kit with a custom flywheel so it'll work with everything else since the LS9 has an extra flywheel bolt. its 8lbs lighter than a LS7 clutch/flywheel package and 800tq holding with "stock engagement"

It's a no-brainer IMO. Sprung hubs, aluminum flywheel/steel ring, rag clutch, dual disc, lighter than LS7, stock engagement, 800RWHP/800TQ, cheaper than any other dual disc................. It's been my choice for my next clutch since it came out.

I've had 'several' different vendor clutches over the years from $800-$1,700 and they were either ON/OFF switches or so damn heavy (McLeod Street Twin) that it was just stupid. The only exception to all of them was the Textralia 0700AB clutch that I put in my wifes T/A. It was like stock too.

04-15-2013, 05:19 PM	#1
RoadconeTuning Senior Member Join Date: Jun 2008 Location: Upstate, SC Posts: 2,684	stock LS9 twin disk anyone driven one? how does it compare to other stock clutches? what about aftermarket stuff? Katech sells this kit with a custom flywheel so it'll work with everything else since the LS9 has an extra flywheel bolt. its 8lbs lighter than a LS7 clutch/flywheel package and 800tq holding with "stock engagement" http://store.katechengines.com/ls9x-...-gxp-p240.aspx __________________ FIRSBIRZ

04-15-2013, 05:29 PM	#2
ForceFed4g63 Senior Member Join Date: Oct 2009 Location: Aiken Posts: 7,002	__________________ 2000 WS6 2005 CTS-V 2004 Titan QC 4x4

04-15-2013, 05:58 PM	#4
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	joe, that is because it is rusted to the flywheel now __________________

04-15-2013, 07:04 PM	#6
Miker Senior Member Join Date: Mar 2010 Location: Goose Creek, SC Posts: 811	Better options for the cost. __________________ 06 GTO-aro AutoXer Printing my car's CARFAX uses a lot of toner.

04-15-2013, 07:24 PM	#7
GreebeanZ28 Senior Member Join Date: Oct 2011 Location: Easley Posts: 2,300	I bought 2 used exedys for half that. __________________

04-16-2013, 10:23 AM	#9
ElecTech Senior Member Join Date: May 2009 Location: Charleston, SC Posts: 1,489	I've driven a 2010 Camaro that had a stock LS9 clutch and the Lingenfelter adapter flywheel. Butter smooth. I may have a line on a brand new take-off LSA clutch, if interested. __________________ Jaime

04-18-2013, 09:24 AM	#15
REDRAGTOPRS Senior Member Join Date: Jul 2008 Location: North Charleston Posts: 490	My base model vette has a LS9 ZR1 clutch in it. I love it. It grabs like no tommorow! But then again, it's just a measly base model vette..... __________________ 2008 LS3 Corvette, A & A Vi3 trim blower, 664 crank hp at 8.5psi, ZR1 clutch, Billy Boat Fusion SS exhaust with mild to wild switch, Custom leather accents..... *FOR SALE* 2001 Black Pontiac Trans Am Ws6 Convertible, Michelin Pilot Sport cups mounted on 2008 black zo6 rims.

04-15-2013, 07:31 PM	#16
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	Why __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack

04-15-2013, 08:07 PM	#17
03SVTCOBRA Senior Member Join Date: Jul 2011 Posts: 2,041	can i have the stock one when you take it off? I need to sail it. __________________ [SIGPIC][/SIGPIC]

04-15-2013, 09:01 PM	#19
Carlrx7 Senior Member Join Date: Apr 2010 Location: Ladson,SC Posts: 3,813	i have a stock ls2 you can sail... don't pay attention to the line below. by taking free clutch you agree to pay 40k for my tt corvette __________________ Dark Aladdin

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode