One step closer....

usmcgunner · 10-20-2012, 09:01 AM

I got my built head, and got it done. I installed it last night, just waiting to get torqued down, and timing set. The intake side is on, I just have to get the header on. Hopefully i'll be riding by next week. My only problem after that, is that my blow off valve is down too far, so I need to get a piece of
90* intercooler piping, that I can weld my BOV on, so it doenst hit anything.

oldskoolstang · 10-20-2012, 10:38 AM

You're getting close to driving it.....that's always a good feeling

Carlrx7 · 10-20-2012, 02:08 PM

NICE, what kind of turbo?

usmcgunner · 10-20-2012, 05:03 PM

Garrett T3. I want to get a T3/T4. I was pushing 20 psi, but with this new head, ill probably turn it down to 17psi.

10-20-2012, 09:01 AM	#1
usmcgunner Senior Member Join Date: Aug 2012 Location: Beaufort, SC Posts: 788	One step closer.... I got my built head, and got it done. I installed it last night, just waiting to get torqued down, and timing set. The intake side is on, I just have to get the header on. Hopefully i'll be riding by next week. My only problem after that, is that my blow off valve is down too far, so I need to get a piece of 90* intercooler piping, that I can weld my BOV on, so it doenst hit anything. __________________ 1988 Merkur XR4Ti. Don't judge me on what I drive, but how I drive it.

10-20-2012, 10:38 AM	#2
oldskoolstang Senior Member Join Date: Apr 2012 Location: Guyton, GA Posts: 1,412	You're getting close to driving it.....that's always a good feeling __________________ Working on junk....

10-20-2012, 02:08 PM	#3
Carlrx7 Senior Member Join Date: Apr 2010 Location: Ladson,SC Posts: 3,813	NICE, what kind of turbo? __________________ Dark Aladdin

10-20-2012, 05:03 PM	#4
usmcgunner Senior Member Join Date: Aug 2012 Location: Beaufort, SC Posts: 788	Garrett T3. I want to get a T3/T4. I was pushing 20 psi, but with this new head, ill probably turn it down to 17psi. __________________ 1988 Merkur XR4Ti. Don't judge me on what I drive, but how I drive it.