Need a "0" balance Ford flexplate

slowgreen99 · 04-20-2012, 11:10 AM

like the title says, flexplate for an internal balance motor. 157 tooth for a c4

bwelch · 04-20-2012, 06:49 PM

TTT

AverageJoe · 04-20-2012, 07:32 PM

bump

Qwik_Sn95 · 04-20-2012, 08:03 PM

Do u have one already that's not 0 balance? If so knock the weight off. I've Got a 28oz 157 tooth you can get.

slowgreen99 · 04-20-2012, 08:04 PM

Quote:

Originally Posted by Qwik_Sn95

Do u have one already that's not 0 balance? If so knock the weight off. I've Got a 28oz 157 tooth you can get.

That's what were doing now. Just tried to find one that didnt need to be ground on. Thanks though!

Kwiksilver · 04-20-2012, 11:47 PM

Shot in the dark but I have the one that was behind my cleveland with a c6. I'm pretty sure it doesnt have weights but not sure on the tooth count. I was under the assumption that the clevelands were related to the small blocks in that area. If not oh well

oldskoolstang · 04-22-2012, 10:03 PM

Cleveland probably had the big bell.

I had a couple 157 tooth ones, I'll look in the shed and see if they're still there.

FYI I cut the weight off a 50oz one to make it zero, but it was way off and I had to take it to machine shop and get it balanced. Wasn't but like $30....

04-20-2012, 11:10 AM	#1
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	Need a "0" balance Ford flexplate like the title says, flexplate for an internal balance motor. 157 tooth for a c4 __________________ M.R.E. Bad Bob Motorsports

04-20-2012, 06:49 PM	#2
bwelch Senior Member Join Date: Aug 2009 Posts: 3,774	TTT __________________

04-20-2012, 11:47 PM	#6
Kwiksilver Senior Member Join Date: Mar 2011 Posts: 475	Shot in the dark but I have the one that was behind my cleveland with a c6. I'm pretty sure it doesnt have weights but not sure on the tooth count. I was under the assumption that the clevelands were related to the small blocks in that area. If not oh well __________________ 66 ford f100 shoptruck. 351 cleveland 4v, CJ heads, holley 750, toploader 4spd, rust.

04-22-2012, 10:03 PM	#7
oldskoolstang Senior Member Join Date: Apr 2012 Location: Guyton, GA Posts: 1,412	Cleveland probably had the big bell. I had a couple 157 tooth ones, I'll look in the shed and see if they're still there. FYI I cut the weight off a 50oz one to make it zero, but it was way off and I had to take it to machine shop and get it balanced. Wasn't but like $30.... __________________ Working on junk....

04-20-2012, 08:03 PM	#4
Qwik_Sn95 Senior Member Join Date: Dec 2011 Posts: 477	Do u have one already that's not 0 balance? If so knock the weight off. I've Got a 28oz 157 tooth you can get.