76mm On3 Performance Turbo and 44mm Wastegate

Rogue Status · 07-22-2013, 10:38 PM

I have a brand new, never seen exhaust/oil 76mm On3 Performance journal bearing turbo used only for mockup. Same story with the wastegate.

Specs:

Cold Side:

Compressor Wheel 76mm
.80 a/r
4” Inlet and 2.5” Compressor Outlet
Inducer- 76.71mm
Exducer- 102.36mm

Exhaust Side:

Exhaust Housing T-4 Flange
1.0 divided ($30 extra if purchased through On3)
3.0" Vband outlet
Inducer- 74.5mm
Exducer- 65mm

44mm Wastegate

Sold!

07-22-2013, 10:38 PM	#1
Rogue Status Senior Member Join Date: Apr 2013 Location: Charleston, SC Posts: 80	76mm On3 Performance Turbo and 44mm Wastegate I have a brand new, never seen exhaust/oil 76mm On3 Performance journal bearing turbo used only for mockup. Same story with the wastegate. Specs: Cold Side: Compressor Wheel 76mm .80 a/r 4” Inlet and 2.5” Compressor Outlet Inducer- 76.71mm Exducer- 102.36mm Exhaust Side: Exhaust Housing T-4 Flange 1.0 divided ($30 extra if purchased through On3) 3.0" Vband outlet Inducer- 74.5mm Exducer- 65mm 44mm Wastegate Sold! Last edited by Rogue Status; 08-02-2013 at 10:19 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode