93 mustang roller

jesse w · 04-25-2014, 05:52 PM

*For Sale or Possible Trade1993 Mustang roller.* Braced fab 9" rear, 40 spline axels and spool, Wilwood brakes, no center section, Wolfe double adjustable upper and lower control arms, adjustable coil over shocks, mini-tubbed, *tubular front K member and A arms, Strange adjustable coil over struts, Caster camber plates, manual brakes, flaming river steering rack and shaft, weld ProStars skinnies up front, 15x10's on rear, VFN fiberglass cowl hood and front nose, clean interior with no seats, rear mounted battery, MSD Digital 6 Plus ignition and HVC coil, Aeromotive A-1000 fuel pump and filter, 16 gal. fuel cell with stainless steel hose and AN fittings run from fuel cell to engine compartment,*lights, ignition, and starting system wired and work with factory switches. Asking $4500.00Call or text if interested.Located in Savannah, Ga. 912-659-681

04-25-2014, 05:52 PM	#1
jesse w Senior Member Join Date: Jul 2008 Posts: 130	93 mustang roller For Sale or Possible Trade1993 Mustang roller. Braced fab 9" rear, 40 spline axels and spool, Wilwood brakes, no center section, Wolfe double adjustable upper and lower control arms, adjustable coil over shocks, mini-tubbed, tubular front K member and A arms, Strange adjustable coil over struts, Caster camber plates, manual brakes, flaming river steering rack and shaft, weld ProStars skinnies up front, 15x10's on rear, VFN fiberglass cowl hood and front nose, clean interior with no seats, rear mounted battery, MSD Digital 6 Plus ignition and HVC coil, Aeromotive A-1000 fuel pump and filter, 16 gal. fuel cell with stainless steel hose and AN fittings run from fuel cell to engine compartment,lights, ignition, and starting system wired and work with factory switches. Asking $4500.00Call or text if interested.Located in Savannah, Ga. 912-659-681 __________________ just trying to get my car going again