HHP

Illusions · 09-25-2012, 07:36 PM

Quote:

Originally Posted by Matts94Z28

I'm taking my new duramax to them Friday for my turbo back install. Can't beat the prices.

how long of a turn around. 2 weeks turns out to 6 months hope you have better results that a few others. then hope its right.

Matts94Z28 · 09-25-2012, 07:40 PM

Probably a few hours. I'm sure it will be fine, they have always been quick, accurate, and good on price for me.

ShawnBoyMoody · 09-25-2012, 07:59 PM

Give it a rest Senior. Didnt you say no hurry when you dropped it off? When they did get going on it, didn't you tell Jeff to hold off for a little bit so it wouldn't be done in time for a race you didnt want junior going to without you? Werent you charged $50 an hour labor instead of the $85 posted shop rate? Mistakes were made and it took longer than it should have. You were given some money back and Jeff offered to fix the issues free of charge and you guys refused. Bring it back and let us fix the issues or quit smearimg the shop on here and facebook. Good day.

LXtasy · 09-25-2012, 08:11 PM

First off, i have not smeared hhp on facebook. Just dumbasses that worked on it. If you call it that. Jeff has not given money back. I am not going to take off work to bring it up there. Should have never been an issue to begin with. Brake lines leaking, fuel lines leaking, return line laying near driveshaft, 02 sensors not hooked up, relays drilled to body panels inside, icebox draining into cab, vehicle keys and remote lost because left on bumper. List can go on. How about a 2 week project that took how long? Parts taking forever to get in. Shall i continue?

ShawnBoyMoody · 09-25-2012, 08:20 PM

Your father was told they were on the bumper he said ok and drove off. How is that HHP's fault? Not the best idea IMO but nevertheless he was told they were back there and he drove off.

ShawnBoyMoody · 09-25-2012, 08:22 PM

According to Zac he showed your father where he was gonna mount relays he said nothing at the time.....

LXtasy · 09-25-2012, 08:23 PM

Oh, how about a linelock that we had hooked up previously and i still had to hook it up after we got it back?

ShawnBoyMoody · 09-25-2012, 08:23 PM

As far as how long it took see first post....

MonteC · 09-25-2012, 08:25 PM

Come on guys this stuff really doesnt need to be on the board.

LXtasy · 09-25-2012, 08:25 PM

By the time that race was there it was already 3 months past the drop off day.

ShawnBoyMoody · 09-25-2012, 08:30 PM

If you quit bitching Ill come fix the shit myself after work. You say you dont name names but everyone knows who you are talking about. I asked you nicely as a friend to ease up and you continue the bashing daily on facebook.

LXtasy · 09-25-2012, 08:37 PM

Guess what shawnbody, no my fault you know it is hhp. Majority of my friends do not know hhp. So if you have guilty conscience oh well. You didnt do it. Oh, and if shit is fucked up I shouldnt do any no name bitching about it? Whatever, move on.

Pesce Nero · 09-25-2012, 08:37 PM

when I put the black car together, I had a few spots where the brake lines leaked. I had some fuel line leaks. I had a fuel system that just didn't work till one day Marcus stuck his skinny arm into the fuel cell and pulled out the foam that must have kept blocking the lines. it didn't steer right and it had a water leak for 1400 miles on Drag Week that we didn't bother to fix.

just saying

LXtasy · 09-25-2012, 08:39 PM

Ray, they said everything was good to go and no leaks.

ShawnBoyMoody · 09-25-2012, 08:41 PM

You are the one that needs to move on. And a consensus is when everyone agrees...a conscience is the word you were looking for. And mines not a guilty one.

LXtasy · 09-25-2012, 08:43 PM

Lets just say if you want to post tags. Man up and call me or stay a bitch.

Pesce Nero · 09-25-2012, 08:44 PM

Quote:

Originally Posted by LXtasy

Ray, they said everything was good to go and no leaks.

No one is perfect and nothing stays perfect or we wouldn't all still look at 18 yr olds

LXtasy · 09-25-2012, 08:45 PM

Never mind dont call me. It is only one of a few that are bitches. And i will live off you little bitches that love to hate me.

BigdaddyDupree · 09-25-2012, 08:45 PM

If your gonna bitch Hal you need to just post your side of the story.

ShawnBoyMoody · 09-25-2012, 08:45 PM

Damn shoulda qouted you before you had a chance edit.....

09-25-2012, 07:40 PM	#2
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	Probably a few hours. I'm sure it will be fine, they have always been quick, accurate, and good on price for me. __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack

09-25-2012, 07:59 PM	#3
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	Give it a rest Senior. Didnt you say no hurry when you dropped it off? When they did get going on it, didn't you tell Jeff to hold off for a little bit so it wouldn't be done in time for a race you didnt want junior going to without you? Werent you charged $50 an hour labor instead of the $85 posted shop rate? Mistakes were made and it took longer than it should have. You were given some money back and Jeff offered to fix the issues free of charge and you guys refused. Bring it back and let us fix the issues or quit smearimg the shop on here and facebook. Good day. __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!" Last edited by ShawnBoyMoody; 09-25-2012 at 08:36 PM.

09-25-2012, 08:11 PM	#4
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	First off, i have not smeared hhp on facebook. Just dumbasses that worked on it. If you call it that. Jeff has not given money back. I am not going to take off work to bring it up there. Should have never been an issue to begin with. Brake lines leaking, fuel lines leaking, return line laying near driveshaft, 02 sensors not hooked up, relays drilled to body panels inside, icebox draining into cab, vehicle keys and remote lost because left on bumper. List can go on. How about a 2 week project that took how long? Parts taking forever to get in. Shall i continue? __________________

09-25-2012, 08:20 PM	#5
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	Your father was told they were on the bumper he said ok and drove off. How is that HHP's fault? Not the best idea IMO but nevertheless he was told they were back there and he drove off. __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

09-25-2012, 08:22 PM	#6
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	According to Zac he showed your father where he was gonna mount relays he said nothing at the time..... __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

09-25-2012, 08:23 PM	#7
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Oh, how about a linelock that we had hooked up previously and i still had to hook it up after we got it back? __________________

09-25-2012, 08:25 PM	#9
MonteC Senior Member Join Date: Oct 2009 Location: Summerville Posts: 4,431	Come on guys this stuff really doesnt need to be on the board. __________________ Griffin Transmission -Home of the most badassest Monte Carlo- Cell: 843-276-0554 Shop: 843-793-4607 04 RSX 06 Ridgeline 86 Monte Carlo

09-25-2012, 08:30 PM	#11
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	If you quit bitching Ill come fix the shit myself after work. You say you dont name names but everyone knows who you are talking about. I asked you nicely as a friend to ease up and you continue the bashing daily on facebook. __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!" Last edited by ShawnBoyMoody; 09-25-2012 at 08:33 PM.

09-25-2012, 08:37 PM	#12
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Guess what shawnbody, no my fault you know it is hhp. Majority of my friends do not know hhp. So if you have guilty conscience oh well. You didnt do it. Oh, and if shit is fucked up I shouldnt do any no name bitching about it? Whatever, move on. __________________ Last edited by LXtasy; 09-25-2012 at 08:42 PM.

09-25-2012, 08:37 PM	#13
Pesce Nero Senior Member Join Date: Jul 2008 Posts: 2,680	when I put the black car together, I had a few spots where the brake lines leaked. I had some fuel line leaks. I had a fuel system that just didn't work till one day Marcus stuck his skinny arm into the fuel cell and pulled out the foam that must have kept blocking the lines. it didn't steer right and it had a water leak for 1400 miles on Drag Week that we didn't bother to fix. just saying __________________

09-25-2012, 08:39 PM	#14
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Ray, they said everything was good to go and no leaks. __________________

09-25-2012, 08:41 PM	#15
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	You are the one that needs to move on. And a consensus is when everyone agrees...a conscience is the word you were looking for. And mines not a guilty one. __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

09-25-2012, 08:43 PM	#16
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Lets just say if you want to post tags. Man up and call me or stay a bitch. __________________

09-25-2012, 08:45 PM	#18
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Never mind dont call me. It is only one of a few that are bitches. And i will live off you little bitches that love to hate me. __________________

09-25-2012, 08:45 PM	#19
BigdaddyDupree Senior Member Join Date: Jul 2008 Location: MACEDONIA Posts: 4,967	If your gonna bitch Hal you need to just post your side of the story. __________________ . What you wanna do?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode