E.T. List - Page 9

WTFWSAT · 12-13-2008, 06:59 AM

Quote:

Originally Posted by TurboLSX

yeah believe it out not those were some shake down passes. its a newer setup running 14psi, i did those runs on the foot break leaving around 2k, i had a 10 bolt but recently purchased a 9inch to use the transbrake. i didnt want to break the rear. Im hoping for some 5.9s when the track opens.

I wasn't doubting you, with that set up you should easily run 5.9's.

Chris

TurboLSX · 12-13-2008, 07:28 AM

Quote:

Originally Posted by WTFWSAT

I wasn't doubting you, with that set up you should easily run 5.9's.

Chris

yeah i wrote that wrong, i meant, can you believe the 10 bolt was still holding up.

1iron · 12-13-2008, 09:27 AM

That is what I was thinking high fives if you can make it leave.

Paul

slowgreen99 · 12-13-2008, 11:52 AM

Quote:

Originally Posted by TurboLSX

yeah i wrote that wrong, i meant, can you believe the 10 bolt was still holding up.

10 bolts are good for 3000+ hp easily on 33x16.5 slicks.

1iron · 12-13-2008, 12:09 PM

Quote:

Originally Posted by slowgreen99

10 bolts are good for 3000+ hp easily on 33x16.5 slicks.

Maybe you an get his old one. It could help with your transmission problems.

slowgreen99 · 12-13-2008, 12:20 PM

Quote:

Originally Posted by 1iron

Maybe you an get his old one. It could help with your transmission problems.

chrisheltra · 12-13-2008, 09:28 PM

I managed to get myself a PB tonight. Unfortunatly I was only able to get in one good run because my slicks are shot. Im going to guess with some new slicks and similar weather my time would get a little better.

DolSVT00 · 12-13-2008, 09:35 PM

Quote:

Originally Posted by chrisheltra

I managed to get myself a PB tonight. Unfortunatly I was only able to get in one good run because my slicks are shot. Im going to guess with some new slicks and similar weather my time would get a little better

I tried to tell ya that last weekend when I borrowed one of them.

Let me know if you find a good price, I gotta replace mine or at least the one that got cut when the motor let go.
I'll have the video up shortly.

chrisheltra · 12-13-2008, 09:51 PM

Quote:

Originally Posted by DolSVT00

I tried to tell ya that last weekend when I borrowed one of them.

Let me know if you find a good price, I gotta replace mine or at least the one that got cut when the motor let go.
I'll have the video up shortly.

I did a little looking and the best place so far is summit and jegs, but I didnt look very hard yet. Ill let you know about the smoke show too later.

05Saleen · 12-14-2008, 12:41 AM

Try Holcomb motorsports also. Congrat's on your new best!!!

chrisheltra · 12-14-2008, 10:59 AM

Quote:

Originally Posted by 05Saleen

Try Holcomb motorsports also. Congrat's on your new best!!!

Thanks Morey

I checked out Holcomb and it looks like they only sell slicks for 15" rims.

Jeff · 12-14-2008, 11:24 AM

Call them . They have some of the best prices on alot of stuff !

Also congrats on the new best ! The truck looked good ! And yes your slicks are shot you couldn't even launch on most of your passes without blowing the tires off .

Richard Head · 12-14-2008, 11:42 AM

Congrat's on the new best!

chrisheltra · 12-14-2008, 11:56 AM

Quote:

Originally Posted by Jeff

Call them . They have some of the best prices on alot of stuff !

Also congrats on the new best ! The truck looked good ! And yes your slicks are shot you couldn't even launch on most of your passes without blowing the tires off .

You saw that huh?

I wasnt going to post this but what the hell. Heres where I blew the tires off.
http://home.comcast.net/~downloads2/spin.wmv

Quote:

Originally Posted by Richard Head

Congrat's on the new best!

Thanks Bill

slowgreen99 · 12-14-2008, 02:47 PM

Good job Chris! Damn, we shoulda ran before my shit started ackin up. 7.80 to a 7.84???? It wouldve been interesting!

Jeff · 12-14-2008, 02:49 PM

Quote:

Originally Posted by slowgreen99

Good job Chris! Damn, we shoulda ran before my shit started ackin up. 7.80 to a 7.84???? It wouldve been interesting!

I'm sure you would of asked for the leave or back tire .

chrisheltra · 12-14-2008, 03:03 PM

Quote:

Originally Posted by slowgreen99

Good job Chris! Damn, we shoulda ran before my shit started ackin up. 7.80 to a 7.84???? It wouldve been interesting!

I would have been close, but with new stickies and some weight reduction its got some more in it.

slowgreen99 · 12-14-2008, 03:57 PM

Quote:

Originally Posted by Jeff

I'm sure you would of asked for the leave or back tire .

Why do you say that?

and Chris, im in that same weight/tire boat as you! Ill bump to the 125's too!

chrisheltra · 12-14-2008, 04:13 PM

Quote:

Originally Posted by slowgreen99

Why do you say that?

and Chris, im in that same weight/tire boat as you! Ill bump to the 125's too!

I really doubt your in the same weight boat as me.

slowgreen99 · 12-14-2008, 04:23 PM

Quote:

Originally Posted by chrisheltra

I really doubt your in the same weight boat as me.

I was talkin about needing to remove some. Im not anywhere near your hp/tq numbers either though!

12-13-2008, 09:27 AM	#163
1iron Senior Member Join Date: May 2007 Posts: 2,014	That is what I was thinking high fives if you can make it leave. Paul Last edited by 1iron; 12-14-2008 at 12:38 AM.

12-13-2008, 09:28 PM	#167
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	I managed to get myself a PB tonight. Unfortunatly I was only able to get in one good run because my slicks are shot. Im going to guess with some new slicks and similar weather my time would get a little better. __________________ Gap A Hoe Racing

12-14-2008, 12:41 AM	#170
05Saleen Senior Member Join Date: Dec 2006 Location: Goose Creek, SC Posts: 3,159	Try Holcomb motorsports also. Congrat's on your new best!!! __________________ 05 Saleen, 91 Mustang LX, 99 Lightning

12-14-2008, 11:24 AM	#172
Jeff Senior Member Join Date: Feb 2007 Posts: 1,015	Call them . They have some of the best prices on alot of stuff ! Also congrats on the new best ! The truck looked good ! And yes your slicks are shot you couldn't even launch on most of your passes without blowing the tires off . __________________ Boat .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-14-2008, 11:42 AM	#173
Richard Head Supporting Member Join Date: Mar 2007 Posts: 788	Congrat's on the new best!

12-14-2008, 02:47 PM	#175
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	Good job Chris! Damn, we shoulda ran before my shit started ackin up. 7.80 to a 7.84???? It wouldve been interesting!