Parting out 85 Mustang coupe

oldskoolstang · 04-19-2013, 12:01 AM

I am parting out my 1985 Mustang coupe. It was originally a 4 cylinder car and still has the front 4 cylinder suspension and brakes (not too good).

I am using the motor and the engine/injector/maf wiring harness. I am also keeping the hood.

Basically all body parts, truck, cracked tail lights, front and rear bumpers (both in good shape), front fenders (not perfect), dash (from a 89), 140 mph cluster, decent rear seat, and anything else you can think of.

Car has a 8.8 rear with Southside lowers. Rear has either 3.55 or 3.73 gears. I think 3.55's. If someone is really interested I can pull the cover and see what exactly is in it.

Prices (all are obo):
- $250 for rear with Southsides
- $50 for dash if you pull it.... $100 if I pull it
- $75 for cluster
- $25 for rear bumper
- $150 for front bumper
- fenders free with front bumper
- front seats free
- $20 for rear seat (both pieces)
- $30 each for the doors
- $75 for trunk lid
- tail lights free
- $50 k-member and entire front suspension (minus the rack)
- $50 steering column with key (tilt non air bag from 89)
- $25 all gray trim for interior
- $100 all 4 10 hole wheels with crappy front tires and hard 275/50/15 BFG Drag Radials

anything else I didn't list that you may want let me know.

Thanks,
Nathan
912- 8 five 6- 2601
oldskoolstang@yahoo.com

oldskoolstang · 04-19-2013, 12:04 AM

Bradleyrj · 04-19-2013, 07:37 AM

I need the trim piece around the shifter, and a stock coil bracket.

oldskoolstang · 04-19-2013, 08:56 PM

Quote:

Originally Posted by Bradleyrj

I need the trim piece around the shifter, and a stock coil bracket.

Trim piece around the shifter looks decent, It has a cylindrical MSD Blaster 2 coil on it and the factory coil bracket is gone.

oldskoolstang · 04-19-2013, 08:58 PM

Quote:

Originally Posted by Harry

I will take the steering column.

O.k. I replied to your pm. Just let me know when you want to try and get it. If Dorchester is running Sunday I may ride up there.....I don't know yet.

Bradleyrj · 04-19-2013, 09:36 PM

Quote:

Originally Posted by oldskoolstang

Trim piece around the shifter looks decent, It has a cylindrical MSD Blaster 2 coil on it and the factory coil bracket is gone.

I'll take the trim piece. I just need it for a pattern.

Paypal info?

ShawnBoyMoody · 04-20-2013, 10:47 AM

Is there any rust in the trunk lid Nathan?

oldskoolstang · 04-20-2013, 11:24 AM

Quote:

Originally Posted by ShawnBoyMoody

Is there any rust in the trunk lid Nathan?

I don't know. i'll go look at it in a few minutes and take a pic of it for you. There are 2 holes drilled in each side where a fucking moron put on a stupid wing.....I did take that off and burn it about 10 minutes after I got the car.....

ShawnBoyMoody · 04-20-2013, 11:38 AM

Ahhh. Dont worry about it then. Dont wanna have to fool with no holes. People are dumb lol

oldskoolstang · 04-20-2013, 02:04 PM

Pic of column for Harry:

Pics of trunk for Shawnboy:

The trunk has virtually no rust at all, just a tiny bit of surface rust around 2 pin holes where a tag was on the back of the trunklid, and there are only 2 holes where the spoiler was at.....

oldskoolstang · 04-20-2013, 02:05 PM

Quote:

Originally Posted by ShawnBoyMoody

Ahhh. Dont worry about it then. Dont wanna have to fool with no holes. People are dumb lol

I'll fiberglass hem for you if you want.....you'll never know they were there....

RobertHolton1 · 04-20-2013, 05:50 PM

How much for whole car

lilpanther · 04-20-2013, 09:07 PM

Quote:

Originally Posted by ShawnBoyMoody

Ahhh. Dont worry about it then. Dont wanna have to fool with no holes. People are dumb lol

Wouldn't take anything for us to weld those up and smooth it out.

oldskoolstang · 04-21-2013, 01:01 AM

Quote:

Originally Posted by RobertHolton1

How much for whole car

Make me an offer. I only have a bill of sale for it, no title. Don't know if that's an issue to you or not.... I am putting it on the driveway tomorrow and starting to tear it down in the morning......

Things i am taking for myself:
-hood
-motor/trans/engine wiring harness/radiator and hold downs
-complete fuel system, lines, and tank

Other that that the the couple pieces already gone/spoken for it's still all there. Only things I've sold so far are a few of the body side molding pieces....

Parts spoken for are:
-trim piece around shifter

oldskoolstang · 04-21-2013, 01:02 AM

Quote:

Originally Posted by Harry

I'll take it. Darryl wants the one that is in the car as long as it is tilt also. How much for it?

Yes, it's a tilt one. I'll check it out further tomorrow for you to make sure it's worth getting.

oldskoolstang · 04-21-2013, 01:03 AM

Quote:

Originally Posted by Bradleyrj

I'll take the trim piece. I just need it for a pattern.

Paypal info?

$10 shipped sound fair? Paypal is: oldskoolstang@yahoo.com

oldskoolstang · 04-21-2013, 12:37 PM

If anyone has tried to call or text me anytime Thursday, Friday, or Saturday please try again. I just got a phone working again yesterday afternoon.

Bradleyrj · 04-21-2013, 01:31 PM

Money sent. Address pm'd.

oldskoolstang · 04-21-2013, 10:42 PM

Quote:

Originally Posted by Bradleyrj

Money sent. Address pm'd.

Gotcha. I'll get it shipped to you tomorrow or Tuesday.
Thanks,
Nathan

oldskoolstang · 04-23-2013, 12:16 AM

Bradley, I mailed it to you today. According to USPS you should see it by Wednesday or Thursday....

04-19-2013, 12:01 AM	#1
oldskoolstang Senior Member Join Date: Apr 2012 Location: Guyton, GA Posts: 1,412	Parting out 85 Mustang coupe I am parting out my 1985 Mustang coupe. It was originally a 4 cylinder car and still has the front 4 cylinder suspension and brakes (not too good). I am using the motor and the engine/injector/maf wiring harness. I am also keeping the hood. Basically all body parts, truck, cracked tail lights, front and rear bumpers (both in good shape), front fenders (not perfect), dash (from a 89), 140 mph cluster, decent rear seat, and anything else you can think of. Car has a 8.8 rear with Southside lowers. Rear has either 3.55 or 3.73 gears. I think 3.55's. If someone is really interested I can pull the cover and see what exactly is in it. Prices (all are obo): - $250 for rear with Southsides - $50 for dash if you pull it.... $100 if I pull it - $75 for cluster - $25 for rear bumper - $150 for front bumper - fenders free with front bumper - front seats free - $20 for rear seat (both pieces) - $30 each for the doors - $75 for trunk lid - tail lights free - $50 k-member and entire front suspension (minus the rack) - $50 steering column with key (tilt non air bag from 89) - $25 all gray trim for interior - $100 all 4 10 hole wheels with crappy front tires and hard 275/50/15 BFG Drag Radials anything else I didn't list that you may want let me know. Thanks, Nathan 912- 8 five 6- 2601 oldskoolstang@yahoo.com __________________ Working on junk.... Last edited by oldskoolstang; 04-19-2013 at 12:06 AM.

04-19-2013, 12:04 AM	#2
oldskoolstang Senior Member Join Date: Apr 2012 Location: Guyton, GA Posts: 1,412	__________________ Working on junk....

04-19-2013, 07:37 AM	#3
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	I need the trim piece around the shifter, and a stock coil bracket. __________________

04-20-2013, 10:47 AM	#7
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	Is there any rust in the trunk lid Nathan? __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

04-20-2013, 11:38 AM	#9
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	Ahhh. Dont worry about it then. Dont wanna have to fool with no holes. People are dumb lol __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

04-20-2013, 02:04 PM	#10
oldskoolstang Senior Member Join Date: Apr 2012 Location: Guyton, GA Posts: 1,412	Pic of column for Harry: Pics of trunk for Shawnboy: The trunk has virtually no rust at all, just a tiny bit of surface rust around 2 pin holes where a tag was on the back of the trunklid, and there are only 2 holes where the spoiler was at..... __________________ Working on junk....

04-20-2013, 05:50 PM	#12
RobertHolton1 Senior Member Join Date: Sep 2010 Location: Moncks Corner Posts: 937	How much for whole car

04-21-2013, 12:37 PM	#17
oldskoolstang Senior Member Join Date: Apr 2012 Location: Guyton, GA Posts: 1,412	If anyone has tried to call or text me anytime Thursday, Friday, or Saturday please try again. I just got a phone working again yesterday afternoon. __________________ Working on junk....

04-21-2013, 01:31 PM	#18
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	Money sent. Address pm'd. __________________

04-23-2013, 12:16 AM	#20
oldskoolstang Senior Member Join Date: Apr 2012 Location: Guyton, GA Posts: 1,412	Bradley, I mailed it to you today. According to USPS you should see it by Wednesday or Thursday.... __________________ Working on junk....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode