First day on the garage build - Page 3

CHEVYMAN434 · 10-18-2012, 07:30 AM

Quote:

Originally Posted by minytrker

Guess I never seen one built before. Not to common around here. It looks very nice though. Are you airconditioning it, guessing no with all the doors.

Yeah man,got a 4 ton unit for it....

WWhittle · 10-18-2012, 07:54 AM

Quote:

Originally Posted by CHEVYMAN434

Im not sure what washout is,but i has 2100 dollars worth of pad built for it to sit on.And i will get a better pic of the concrete at the walls..Its has a 2x8 bottom band board that is the concrete form...But they said they will be done tomo...

Washout is when the dirt starts to washout from under the slab. Very common when the slab is poured the way yours is poured. One of many ways to combat washout is to turn the slab down on the edge, that's why I asked.

CHEVYMAN434 · 10-18-2012, 11:57 AM

Yeah i asked about that this morning..They have tapered the dirt around the building about 3ft out..They said even if there was no dirt all the way around the edge,that the slab is connected to the bottom board with bolts that are in the concrete all the way around..So basicly they put 4" bolts on the bottom board all the way around on the inside of the building before the pour started...But it looks good and the ground has runoff away from the building and everything looks as it should...

CHEVYMAN434 · 10-18-2012, 02:37 PM

Well,they are done and gone.They cleaned up real nice and i had another load of fill dirt brought and they spread it out real nice across the front..

Matts94Z28 · 10-18-2012, 02:42 PM

Nice.

1998ta__1991rs · 10-18-2012, 03:00 PM

im jelly, grape jelly

minytrker · 10-18-2012, 03:23 PM

Quote:

Originally Posted by CHEVYMAN434

Yeah man,got a 4 ton unit for it....

Hell yeah, thats cool. I am building a shop at my new house with a/c.

Quote:

Originally Posted by CHEVYMAN434

Well,they are done and gone.They cleaned up real nice and i had another load of fill dirt brought and they spread it out real nice across the front..

That done mess around, that was quick.

98Camarod · 10-18-2012, 03:33 PM

The dirt is only going to help so much. If there isn't a turndown on it, it's only a matter of time before the rain gets ahold of it.

Looks good!

WWhittle · 10-18-2012, 04:49 PM

Quote:

Originally Posted by CHEVYMAN434

Yeah i asked about that this morning..They have tapered the dirt around the building about 3ft out..They said even if there was no dirt all the way around the edge,that the slab is connected to the bottom board with bolts that are in the concrete all the way around..So basicly they put 4" bolts on the bottom board all the way around on the inside of the building before the pour started...But it looks good and the ground has runoff away from the building and everything looks as it should...

Yeah that's not really going to help with washout. I was trying to politely tell you that you need to take care of it without me sounding like a know it all.
Looking at your pictures, the washout will happen the next time it rains. The grade on the dirt will not help. Do yourself a favor and get some sod or gravel down around the base of the building as soon as you can. The building may be connected to the slab, but the dirt under the slab will not be there long if you don't do something soon. Looks great though, I'd like to have a shop like that myself!

CHEVYMAN434 · 10-18-2012, 07:01 PM

I will prob go get a couple pallets of sod if you think that will help?? But i looked at it very well and dug down to look how it contacts the pad.. The bottom band board id 2" in the dirt and then the concrete starts at the 2" mark... But yeah,the sod is no problem...I'm really happy with this companys work and the owners name is Joe Barden and his number is 803-682-4223..His prices and quality of materials beat anyone else hands down.I shopped for this building for a solid year..It ended up bein $12 a sq ft...My ben -pak drive on will be here soon and until then i will be doing the electrical inside..And thanks for the good coments,im really happy with this and have waited my whole adult life to finally have the things i want!!!!!!

AverageJoe · 10-18-2012, 07:18 PM

Looks great! I wish I could do one of those for my garage, but I'm pretty sure the hoa would never approve it.

Definitely get some sod around it, even though it sounds like the bottom board is acting as a turn down.

brewerz28 · 10-19-2012, 03:49 PM

Hella nice ashley. Definently jelly bud.

Pesce Nero · 10-19-2012, 05:16 PM

I need one of those garages behind my garage.

Zac, half?

Mike · 10-19-2012, 05:31 PM

Quote:

Originally Posted by Pesce Nero

Zac, half?

I'll take a third.

Pesce Nero · 10-19-2012, 05:52 PM

Quote:

Originally Posted by Mike

I'll take a third.

Ok, turbo monte build?
6200 each

Mike · 10-19-2012, 06:02 PM

Quote:

Originally Posted by Pesce Nero

Ok, turbo monte build?

Nope. Just a place to hide cash from my wife, my little shed isn't cutting it anymore.

Pesce Nero · 10-19-2012, 06:28 PM

Quote:

Originally Posted by Mike

Nope. Just a place to hide cash from my wife, my little shed isn't cutting it anymore.

I believe you!

CHEVYMAN434 · 10-20-2012, 01:23 PM

Well,we worked the dirt out around the edge of the slab. Went and rented a wacker packer and got that clay pushed in there real good. It looks loose still but thats just what we put back on top to level it off.. Gonna go to get a couple pallets of sod on monday to finish it off...

10-18-2012, 02:37 PM	#44
CHEVYMAN434 Senior Member Join Date: Nov 2009 Location: pineville sc Posts: 671	Well,they are done and gone.They cleaned up real nice and i had another load of fill dirt brought and they spread it out real nice across the front.. Last edited by CHEVYMAN434; 11-11-2012 at 06:40 PM.

10-18-2012, 02:42 PM	#45
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	Nice. __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack

10-18-2012, 03:00 PM	#46
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	im jelly, grape jelly __________________ Funny

10-19-2012, 03:49 PM	#52
brewerz28 Senior Member Join Date: Feb 2010 Location: the corner of get a map and fuck off Posts: 565	Hella nice ashley. Definently jelly bud. __________________ *"I don't fuck around anymore, I got a man under the hood."*

10-19-2012, 05:16 PM	#53
Pesce Nero Senior Member Join Date: Jul 2008 Posts: 2,680	I need one of those garages behind my garage. Zac, half? __________________

10-18-2012, 11:57 AM	#43
CHEVYMAN434 Senior Member Join Date: Nov 2009 Location: pineville sc Posts: 671	Yeah i asked about that this morning..They have tapered the dirt around the building about 3ft out..They said even if there was no dirt all the way around the edge,that the slab is connected to the bottom board with bolts that are in the concrete all the way around..So basicly they put 4" bolts on the bottom board all the way around on the inside of the building before the pour started...But it looks good and the ground has runoff away from the building and everything looks as it should...

10-18-2012, 03:33 PM	#48
98Camarod Senior Member Join Date: Mar 2009 Location: Summerville, SC Posts: 1,525	The dirt is only going to help so much. If there isn't a turndown on it, it's only a matter of time before the rain gets ahold of it. Looks good!

10-18-2012, 07:01 PM	#50
CHEVYMAN434 Senior Member Join Date: Nov 2009 Location: pineville sc Posts: 671	I will prob go get a couple pallets of sod if you think that will help?? But i looked at it very well and dug down to look how it contacts the pad.. The bottom band board id 2" in the dirt and then the concrete starts at the 2" mark... But yeah,the sod is no problem...I'm really happy with this companys work and the owners name is Joe Barden and his number is 803-682-4223..His prices and quality of materials beat anyone else hands down.I shopped for this building for a solid year..It ended up bein $12 a sq ft...My ben -pak drive on will be here soon and until then i will be doing the electrical inside..And thanks for the good coments,im really happy with this and have waited my whole adult life to finally have the things i want!!!!!!

10-20-2012, 01:23 PM	#58
CHEVYMAN434 Senior Member Join Date: Nov 2009 Location: pineville sc Posts: 671	Well,we worked the dirt out around the edge of the slab. Went and rented a wacker packer and got that clay pushed in there real good. It looks loose still but thats just what we put back on top to level it off.. Gonna go to get a couple pallets of sod on monday to finish it off... Last edited by CHEVYMAN434; 11-11-2012 at 06:40 PM.