What do you nawwwz guys think of this? - Page 2

GreebeanZ28 · 05-23-2013, 03:23 PM

Looks badass.

03SVTCOBRA · 05-23-2013, 04:12 PM

Brian should get this...

ShawnBoyMoody · 05-23-2013, 04:17 PM

Quote:

Originally Posted by 03SVTCOBRA

Brian should get this...

rep

Darryl Buckner · 05-23-2013, 05:19 PM

Cool idea, just wonder how much it impedes the air flow and fuel coming from the carb..

DIGGLER · 05-23-2013, 05:31 PM

avatar. mmmmmmmmmmm

NesbittRacing1 · 05-23-2013, 05:45 PM

I'm not a big fan of it.1 i can only run one plate in my class 2 if i wasnt limited to a plate i would rather have a fogger than that

slowgreen99 · 05-23-2013, 06:40 PM

Quote:

Originally Posted by DIGGLER

avatar. mmmmmmmmmmm

Ya like the summit guy huh? Little bobby? Or is it darryls stickers?

minytrker · 05-24-2013, 01:36 AM

Quote:

Originally Posted by Darryl Buckner

Cool idea, just wonder how much it impedes the air flow and fuel coming from the carb..

Quote from dave owner of nitrous outlet

The puck is 1inch tall and 1 3/4 in Diameter. Once the intake floor is machined to accept the puck the push sticks up around 3/4 of an inch off the floor. I have talk to porters and from my understanding a properly ported or designed intake's floor does not do much as far as air flow. If all the info I have been given is correct I do not see how this little puck will affect the air flow. I am talking with someone to have them flow it on there bench to see though.
Dave

WWhittle · 05-24-2013, 08:23 AM

Quote:

Originally Posted by minytrker

Quote from dave owner of nitrous outlet

The puck is 1inch tall and 1 3/4 in Diameter. Once the intake floor is machined to accept the puck the push sticks up around 3/4 of an inch off the floor. I have talk to porters and from my understanding a properly ported or designed intake's floor does not do much as far as air flow. If all the info I have been given is correct I do not see how this little puck will affect the air flow. I am talking with someone to have them flow it on there bench to see though.
Dave

Seems ass backwards to me. Probably should have tested that before production?? There's no way that doesn't have some affect on air flow and even distribution.

ForceFed4g63 · 05-24-2013, 08:29 AM

Kind of surprised as well that they didn't test that before releasing it.

slowgreen99 · 05-24-2013, 10:02 AM

Not to start a pissing match, but the floor of an intake having a big boulder on it HAS to effect air flow. If it didn't, then why would intakes be smoothed/ported on the floor?

DIGGLER · 05-24-2013, 10:21 AM

instead of machining the intake floor for the puck, i would tap the intake for a fogger that would work much better.

slowgreen99 · 05-24-2013, 10:46 AM

Lol x2

minytrker · 05-24-2013, 12:26 PM

Quote:

Originally Posted by DIGGLER

instead of machining the intake floor for the puck, i would tap the intake for a fogger that would work much better.

Its a cheap alternative. Not everyone can afford a fogger and not all classes allow foggers.

minytrker · 05-24-2013, 12:27 PM

Quote:

Originally Posted by slowgreen99

Not to start a pissing match, but the floor of an intake having a big boulder on it HAS to effect air flow. If it didn't, then why would intakes be smoothed/ported on the floor?

If it interfered with the airflow by any significant amount wouldnt it show up on your plug readings? People run dual spray bars inside intakes, do they effect airflow?

DIGGLER · 05-24-2013, 02:58 PM

Quote:

Originally Posted by minytrker

Its a cheap alternative. Not everyone can afford a fogger and not all classes allow foggers.

its basically a fogger. there is a nozzle for each runner. not sure on cost though?

DIGGLER · 05-24-2013, 03:01 PM

Quote:

Originally Posted by minytrker

If it interfered with the airflow by any significant amount wouldnt it show up on your plug readings? People run dual spray bars inside intakes, do they effect airflow?

i dont think the puck will cause much problems hp wise by being in that area of the intake.... im trying to find it now, but i remember reading a pyramid type thing being installed in the intake floor where this puck gets mounted. can't find it now?

DIGGLER · 05-24-2013, 03:06 PM

this is an oldsmobile intake. may or may not be affective on other engines/intakes.

oldskoolstang · 05-24-2013, 06:28 PM

I'll stick to my plate until I need and can afford to do a fogger set-up...

minytrker · 05-24-2013, 06:33 PM

Quote:

Originally Posted by DIGGLER

its basically a fogger. there is a nozzle for each runner. not sure on cost though?

Thats the idea, its a cheap alternative to a fogger. Of course its not as tunable as a fogger jet wise but you can get almost equal results since its flowed and adjusted for your intake. It starts at $350 installed vs $1000+ for custom fogger.

05-23-2013, 03:23 PM	#21
GreebeanZ28 Senior Member Join Date: Oct 2011 Location: Easley Posts: 2,300	Looks badass. __________________

05-23-2013, 04:12 PM	#22
03SVTCOBRA Senior Member Join Date: Jul 2011 Posts: 2,041	Brian should get this... __________________ [SIGPIC][/SIGPIC]

05-23-2013, 05:19 PM	#24
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	Cool idea, just wonder how much it impedes the air flow and fuel coming from the carb.. __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

05-23-2013, 05:45 PM	#26
NesbittRacing1 Senior Member Join Date: Dec 2011 Location: georgetown, sc Posts: 456	I'm not a big fan of it.1 i can only run one plate in my class 2 if i wasnt limited to a plate i would rather have a fogger than that Last edited by NesbittRacing1; 05-23-2013 at 05:46 PM. Reason: cause

05-24-2013, 10:02 AM	#31
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	Not to start a pissing match, but the floor of an intake having a big boulder on it HAS to effect air flow. If it didn't, then why would intakes be smoothed/ported on the floor? __________________ M.R.E. Bad Bob Motorsports

05-23-2013, 05:31 PM	#25
DIGGLER Senior Member Join Date: Aug 2012 Posts: 1,458	avatar. mmmmmmmmmmm

05-24-2013, 08:29 AM	#30
ForceFed4g63 Senior Member Join Date: Oct 2009 Location: Aiken Posts: 7,002	Kind of surprised as well that they didn't test that before releasing it.

05-24-2013, 10:21 AM	#32
DIGGLER Senior Member Join Date: Aug 2012 Posts: 1,458	instead of machining the intake floor for the puck, i would tap the intake for a fogger that would work much better.

05-24-2013, 10:46 AM	#33
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	Lol x2 __________________ M.R.E. Bad Bob Motorsports

05-24-2013, 03:06 PM	#38
DIGGLER Senior Member Join Date: Aug 2012 Posts: 1,458	this is an oldsmobile intake. may or may not be affective on other engines/intakes.

05-24-2013, 06:28 PM	#39
oldskoolstang Senior Member Join Date: Apr 2012 Location: Guyton, GA Posts: 1,412	I'll stick to my plate until I need and can afford to do a fogger set-up... __________________ Working on junk....