Explorer 8.8 Complete 31 spline 4.10

1998ta__1991rs · 04-23-2013, 10:48 AM

Complete rotor to rotor, still has ebrake cables, 31 spline 4.10, $300

Pesce Nero · 04-23-2013, 11:09 AM

lets build something around that rear

Darryl Buckner · 04-23-2013, 11:46 AM

Good rearend for the TA. easily as strong or stronger than a 12 bolt, cheaper then a 9 inch..

1998ta__1991rs · 04-23-2013, 11:55 AM

Quote:

Originally Posted by Darryl Buckner

Good rearend for the TA. easily as strong or stronger than a 12 bolt, cheaper then a 9 inch..

by the time i buy the brackets, fab the torque arm mount, do 9" ends, and buy axles, ill be cheaper just buying a 9" and itll be a lot less work

Darryl Buckner · 04-23-2013, 11:57 AM

Quote:

Originally Posted by 1998ta__1991rs

by the time i buy the brackets, fab the torque arm mount, do 9" ends, and buy axles, ill be cheaper just buying a 9" and itll be a lot less work

Shawn has all the fab work under control, just go get him lunch when he gets hungry, sit back and watch..

TurboWS6 · 04-23-2013, 12:26 PM

Chop the axle tubes off a F body 10 bolt and weld them on the 8.8. Then fab the torque ARM mount using some 1/4 inch steel plate and 1/2" tube. There are a couple good threads on tech showing the torque mount. You will probably have 8-12 hrs into the fab work which is still cheaper than a 2500 plus 12 bolt, Dana, or 9".

MonteC · 04-23-2013, 12:28 PM

Yall dont know zac very well.

1998ta__1991rs · 04-23-2013, 12:29 PM

Quote:

Originally Posted by TurboWS6

Chop the axle tubes off a F body 10 bolt and weld them on the 8.8. Then fab the torque ARM mount using some 1/4 inch steel plate and 1/2" tube. There are a couple good threads on tech showing the torque mount. You will probably have 8-12 hrs into the fab work which is still cheaper than a 2500 plus 12 bolt, Dana, or 9".

you can only go 33 spline on 10 bolt tubes

1998ta__1991rs · 04-23-2013, 12:29 PM

and i can build a 9" with a spool, 35's, etc for around $1600

Matts94Z28 · 04-23-2013, 01:04 PM

Quote:

Originally Posted by MonteC

Yall dont know zac very well.

04-23-2013, 10:48 AM	#1
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	Explorer 8.8 Complete 31 spline 4.10 Complete rotor to rotor, still has ebrake cables, 31 spline 4.10, $300 __________________ Funny

04-23-2013, 11:09 AM	#2
Pesce Nero Senior Member Join Date: Jul 2008 Posts: 2,680	lets build something around that rear __________________

04-23-2013, 11:46 AM	#3
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	Good rearend for the TA. easily as strong or stronger than a 12 bolt, cheaper then a 9 inch.. __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

04-23-2013, 12:26 PM	#6
TurboWS6 Senior Member Join Date: Jan 2012 Location: Rockingham, NC Posts: 799	Chop the axle tubes off a F body 10 bolt and weld them on the 8.8. Then fab the torque ARM mount using some 1/4 inch steel plate and 1/2" tube. There are a couple good threads on tech showing the torque mount. You will probably have 8-12 hrs into the fab work which is still cheaper than a 2500 plus 12 bolt, Dana, or 9". __________________ [IMG][/IMG] 1999 WS6, 6.0L, S480, TH400, Dana 60 1967 GTO 496" Poncho stroker, 4 speed, 4:11s 2007 Hemi Ram 2013 Grand Caravan RT 1997 Civic

04-23-2013, 12:28 PM	#7
MonteC Senior Member Join Date: Oct 2009 Location: Summerville Posts: 4,431	Yall dont know zac very well. __________________ Griffin Transmission -Home of the most badassest Monte Carlo- Cell: 843-276-0554 Shop: 843-793-4607 04 RSX 06 Ridgeline 86 Monte Carlo

04-23-2013, 12:29 PM	#9
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	and i can build a 9" with a spool, 35's, etc for around $1600 __________________ Funny