turbo headers

79bluebird · 07-08-2009, 09:20 PM

i am about to build a set of turbo headers for my 79 bird with a pontiac motor. i just wanted to see if anyone on here has a hook up on exhaust tubing. i have the 3/8 mild steel d-port flanges and the headers will be 1 5/8. i am lloking for u bends, 90's ,45', and maybe some assortment bends.

LXtasy · 07-08-2009, 09:21 PM

Jegs dual exhaust v8 kit COUGH

BAD BOB · 07-08-2009, 09:35 PM

http://www.headermania.com/mm5/merch...ry_Code=JBENDS

this is where i bought mine when i built the header for my 4wheeler. i think its a pretty good price

79bluebird · 07-08-2009, 09:45 PM

i have found them cheap by a few dollars just hoping someone may have them local i could get a deal on. i dont want a exhaust kit i have to make some sharp bends to clear the a arms and motor plates.

BAD BOB · 07-08-2009, 10:37 PM

no one locally sells tight radius j or u bends. parks does sell some but they are wide radius bends and they might not have 1 5/8

79bluebird · 07-09-2009, 03:40 PM

i will also be looking for 2.5 tubing stright and 90' and 5" for my down pipe.

BAD BOB · 07-09-2009, 06:42 PM

i can get the 2.5 straight, 5" straight and i think i can order some 5" mandrel bends

07-08-2009, 09:20 PM	#1
79bluebird Senior Member Join Date: Aug 2008 Location: summerville,sc Posts: 398	turbo headers i am about to build a set of turbo headers for my 79 bird with a pontiac motor. i just wanted to see if anyone on here has a hook up on exhaust tubing. i have the 3/8 mild steel d-port flanges and the headers will be 1 5/8. i am lloking for u bends, 90's ,45', and maybe some assortment bends. __________________ 97 s10 w/355 motor swap 79 firebird getting a 468 pontiac stroker with a 88mm turbo 93 suzuki gsxr 600

07-08-2009, 09:21 PM	#2
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Jegs dual exhaust v8 kit COUGH __________________

07-08-2009, 09:35 PM	#3
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	http://www.headermania.com/mm5/merch...ry_Code=JBENDS this is where i bought mine when i built the header for my 4wheeler. i think its a pretty good price __________________ IM BAD BOB

07-08-2009, 09:45 PM	#4
79bluebird Senior Member Join Date: Aug 2008 Location: summerville,sc Posts: 398	i have found them cheap by a few dollars just hoping someone may have them local i could get a deal on. i dont want a exhaust kit i have to make some sharp bends to clear the a arms and motor plates. __________________ 97 s10 w/355 motor swap 79 firebird getting a 468 pontiac stroker with a 88mm turbo 93 suzuki gsxr 600

07-08-2009, 10:37 PM	#5
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	no one locally sells tight radius j or u bends. parks does sell some but they are wide radius bends and they might not have 1 5/8 __________________ IM BAD BOB

07-09-2009, 03:40 PM	#6
79bluebird Senior Member Join Date: Aug 2008 Location: summerville,sc Posts: 398	i will also be looking for 2.5 tubing stright and 90' and 5" for my down pipe. __________________ 97 s10 w/355 motor swap 79 firebird getting a 468 pontiac stroker with a 88mm turbo 93 suzuki gsxr 600

07-09-2009, 06:42 PM	#7
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	i can get the 2.5 straight, 5" straight and i think i can order some 5" mandrel bends __________________ IM BAD BOB