383 SBC parts

Beigebomber1970 · 09-11-2009, 05:42 PM

I have some vintage TRW forged pistons with full floating pins .030 oversize
never been run
as well as an early 70's 010 4 bolt block that i have no use for.

$300 for the pistons OBO
$100 For the Block OBO

$350 for both

open to trades for SBF parts....

the pistons are made for a 5.7 rod and with a factory deck height come in .020 in the hole.
the block is 4.00 inch bore and in definite need of an overbore. It put the #1 rod through the oil pan. didn't hurt the block though.

Beigebomber1970 · 09-22-2009, 12:24 PM

No longer available. Traded for Mustang parts.

09-11-2009, 05:42 PM	#1
Beigebomber1970 Member Join Date: Sep 2009 Location: Summerville, S.C. Posts: 9	383 SBC parts I have some vintage TRW forged pistons with full floating pins .030 oversize never been run as well as an early 70's 010 4 bolt block that i have no use for. $300 for the pistons OBO $100 For the Block OBO $350 for both open to trades for SBF parts.... the pistons are made for a 5.7 rod and with a factory deck height come in .020 in the hole. the block is 4.00 inch bore and in definite need of an overbore. It put the #1 rod through the oil pan. didn't hurt the block though. Last edited by Beigebomber1970; 09-12-2009 at 04:44 PM. Reason: 5.7 rod length and bore info

09-22-2009, 12:24 PM	#2
Beigebomber1970 Member Join Date: Sep 2009 Location: Summerville, S.C. Posts: 9	No longer available. Traded for Mustang parts.