GM Balancer puller

[Carlrx7]

Who gots one? all the parts stores rental places are out. must be cam swapping time for them ls mota's.



-Carl

[BAD BOB]

i do here at the shop. i can take it with me tonight and you can meet up with me or you can get it tommorrow. cell is 200-3196

[BAD BOB]

oh and do you need the one that has the bar that goes down into the crank or the one that has the cone shape end that bushes on the end of the crank?

[Carlrx7]

i dunno, ive used the one in the picture, arms grab the pulley then it presses against a loosen'd bolt

-Carl

[Carlrx7]

well, i found a puller, just waiting for ROB to let me borrow that 3-4 ft breaker bar.

[05Saleen]

Originally Posted by Carlrx7

well, i found a puller, just waiting for ROB to let me borrow that 3-4 ft breaker bar.

You would be better off with a air impact gun and a different puller.

[98nbmz]

I use a puller that looks like a ducks foot it works well i think Oreillys have them.

[05Saleen]

Originally Posted by 98nbmz

I use a puller that looks like a ducks foot it works well i think Oreillys have them.

That is the one I have always used.....You have to find 3 bolts to bolt it to the harmonic balancer and use a impact wrench to get it off.

[LXtasy]

Originally Posted by 05Saleen

That is the one I have always used.....You have to find 3 bolts to bolt it to the harmonic balancer and use a impact wrench to get it off.

Same one we use. But we don't use an impact though. Just alot of ass on the wrench.

[bwelch]

3 Jaw will work. Use an impact gun.