HHP Carolina/SMAF Open Dyno Day 10/29/2011 from 9 am unitl...

Jeff@HHP · 10-12-2011, 09:08 AM

Ok guys you asked for it so here it is. SMAF is helping us host an open dyno day 10/29/2011 from 9 am unitl the last car is run. Dyno rates will be $30.00 for 2 pulls with wideband and print out. If you would like more runs you can get them after all the cars have been run.

jmd · 10-12-2011, 09:11 AM

sounds like fun.

cobraetti · 10-12-2011, 09:19 AM

will be alot of fast rides

chrisheltra · 10-12-2011, 09:30 AM

Id like to throw mine on there with the race tune to check it out. IIRC your dyno isnt loaded correct?

ForceFed4g63 · 10-12-2011, 09:33 AM

That's a great price!

DolSVT00 · 10-12-2011, 10:19 AM

Quote:

Originally Posted by cobraetti

will be alot of Stock rides

Fixed

Quote:

Originally Posted by chrisheltra

Id like to throw mine on there with the race tune to check it out. IIRC your dyno isnt loaded correct?

Pretty sure its a dynojet without a brake. Let me know if you do it, I'll lock the converter in that tune and you'll get some big numbers.

silver fox · 10-12-2011, 10:18 AM

Do you have a way to read air fuel? Do you get to make changes between pulls?

ForceFed4g63 · 10-12-2011, 10:25 AM

Quote:

Originally Posted by silver fox

Do you have a way to read air fuel? Do you get to make changes between pulls?

Quote:

Originally Posted by Jeff@HHP

Ok guys you asked for it so here it is. SMAF is helping us host an open dyno day 10/29/2011 from 9 am unitl the last car is run. Dyno rates will be $30.00 for 2 pulls with wideband and print out. If you would like more runs you can get them after all the cars have been run.

...

ElecTech · 10-13-2011, 07:59 AM

Quote:

Originally Posted by silver fox

Do you have a way to read air fuel? Do you get to make changes between pulls?

This would depend on the extent of the "changes".

If you want to:

Load a different calibration file

one run off gas and the other on

A simple jet change that can be done externally (doesn't require bowl removal)

These things we should be able to allow, but in order to keep the flow of cars gowing, they need to be quick. Please have everything ready to go and any tools you may need with you.

This is by no means absolute and would also depend on the volume of cars we need to run through.

yota · 10-12-2011, 10:30 AM

hate i'm going to miss out on this

somebody post up plenty of pics and vids!

Harry · 10-12-2011, 11:13 AM

I may have to bring mine for this.

PapaBear · 10-12-2011, 11:31 AM

Wish it was AWD dyno.....

LXtasy · 10-12-2011, 12:18 PM

Blazer might spin the rollers. Have to see if what we have done is getting put down to the ground

Joker · 10-12-2011, 01:54 PM

I still need a tune haha

LadyInRed · 10-12-2011, 08:51 PM

Might bring the Mustang out again, depending on how busy our morning is with cookout prep.

1998ta__1991rs · 10-12-2011, 09:02 PM

damn, gotta work

BAD BOB · 10-12-2011, 09:35 PM

might let the rcf see the dyno for the first time eva!

03SVTCOBRA · 10-12-2011, 09:36 PM

Quote:

Originally Posted by BAD BOB

might let the rcf see the dyno for the first time eva!

At least go last so you dont break it too early

Blue Skunk · 10-12-2011, 09:43 PM

Do you have to pre-register or is it first come first serve?

BAD BOB · 10-12-2011, 10:05 PM

Quote:

Originally Posted by 03SVTCOBRA

At least go last so you dont break it too early

what? break the car? bc that all that will probably break!

10-12-2011, 09:08 AM	#1
Jeff@HHP Senior Member Join Date: Jan 2010 Location: North Charleston SC Posts: 170	HHP Carolina/SMAF Open Dyno Day 10/29/2011 from 9 am unitl... Ok guys you asked for it so here it is. SMAF is helping us host an open dyno day 10/29/2011 from 9 am unitl the last car is run. Dyno rates will be $30.00 for 2 pulls with wideband and print out. If you would like more runs you can get them after all the cars have been run. __________________ Jeff Hunter 888-894-1115 ext 306 843-206-0426 jeff@hhpracing.com http://www.hhpcarolina.com "The HHP Crew" Last edited by DolSVT00; 10-12-2011 at 10:21 AM.

10-12-2011, 09:11 AM	#2
jmd Senior Member Join Date: May 2008 Posts: 3,177	sounds like fun. __________________ Cadillac man

10-12-2011, 09:19 AM	#3
cobraetti Senior Member Join Date: Jul 2008 Location: goose creek, sc Posts: 274	will be alot of fast rides __________________

10-12-2011, 09:30 AM	#4
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Id like to throw mine on there with the race tune to check it out. IIRC your dyno isnt loaded correct? __________________ Gap A Hoe Racing

10-12-2011, 09:33 AM	#5
ForceFed4g63 Senior Member Join Date: Oct 2009 Location: Aiken Posts: 7,002	That's a great price! __________________ 2000 WS6 2005 CTS-V 2004 Titan QC 4x4

10-12-2011, 10:18 AM	#7
silver fox Senior Member Join Date: Mar 2009 Posts: 317	Do you have a way to read air fuel? Do you get to make changes between pulls?

10-12-2011, 10:30 AM	#10
yota Senior Member Join Date: Jun 2011 Location: Va Posts: 1,049	hate i'm going to miss out on this somebody post up plenty of pics and vids! __________________ 1999 Trans Am 2007.5 Dodge Mega Cab Cummins

10-12-2011, 11:13 AM	#11
Harry Senior Member Join Date: May 2008 Location: Summerville Posts: 3,321	I may have to bring mine for this.

10-12-2011, 11:31 AM	#12
PapaBear Senior Member Join Date: Aug 2010 Posts: 2,809	Wish it was AWD dyno.....

10-12-2011, 12:18 PM	#13
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Blazer might spin the rollers. Have to see if what we have done is getting put down to the ground __________________

10-12-2011, 01:54 PM	#14
Joker Senior Member Join Date: Jan 2011 Posts: 381	I still need a tune haha

10-12-2011, 08:51 PM	#15
LadyInRed Senior Member Join Date: Apr 2010 Location: Charleston Posts: 1,579	Might bring the Mustang out again, depending on how busy our morning is with cookout prep. __________________ 2011 Mustang 3.7L 6spd 2001 Ram 2500 Cummins TT 6spd 1998 Camaro Z28 LS1 6spd 1984 Camaro Z28

10-12-2011, 09:02 PM	#16
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	damn, gotta work __________________ Funny

10-12-2011, 09:35 PM	#17
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	might let the rcf see the dyno for the first time eva! __________________ IM BAD BOB

10-12-2011, 09:43 PM	#19
Blue Skunk Senior Member Join Date: Apr 2010 Location: LA (Ladson Area) Posts: 459	Do you have to pre-register or is it first come first serve? __________________ Street Turtle - 08 Shelby GT500 Daily Driver - 13 Ram 2500 Cummins Turbo Diesel Track Star - 68 F100