HHP Carolina/SMAF Open Dyno Day 10/29/2011 from 9 am unitl...

Jeff@HHP · 10-12-2011, 09:08 AM

Ok guys you asked for it so here it is. SMAF is helping us host an open dyno day 10/29/2011 from 9 am unitl the last car is run. Dyno rates will be $30.00 for 2 pulls with wideband and print out. If you would like more runs you can get them after all the cars have been run.

jmd · 10-12-2011, 09:11 AM

sounds like fun.

cobraetti · 10-12-2011, 09:19 AM

will be alot of fast rides

chrisheltra · 10-12-2011, 09:30 AM

Id like to throw mine on there with the race tune to check it out. IIRC your dyno isnt loaded correct?

ForceFed4g63 · 10-12-2011, 09:33 AM

That's a great price!

silver fox · 10-12-2011, 10:18 AM

Do you have a way to read air fuel? Do you get to make changes between pulls?

DolSVT00 · 10-12-2011, 10:19 AM

Quote:

Originally Posted by cobraetti

will be alot of Stock rides

Fixed

Quote:

Originally Posted by chrisheltra

Id like to throw mine on there with the race tune to check it out. IIRC your dyno isnt loaded correct?

Pretty sure its a dynojet without a brake. Let me know if you do it, I'll lock the converter in that tune and you'll get some big numbers.

ForceFed4g63 · 10-12-2011, 10:25 AM

Quote:

Originally Posted by silver fox

Do you have a way to read air fuel? Do you get to make changes between pulls?

Quote:

Originally Posted by Jeff@HHP

Ok guys you asked for it so here it is. SMAF is helping us host an open dyno day 10/29/2011 from 9 am unitl the last car is run. Dyno rates will be $30.00 for 2 pulls with wideband and print out. If you would like more runs you can get them after all the cars have been run.

...

yota · 10-12-2011, 10:30 AM

hate i'm going to miss out on this

somebody post up plenty of pics and vids!

Harry · 10-12-2011, 11:13 AM

I may have to bring mine for this.

PapaBear · 10-12-2011, 11:31 AM

Wish it was AWD dyno.....

LXtasy · 10-12-2011, 12:18 PM

Blazer might spin the rollers. Have to see if what we have done is getting put down to the ground

Joker · 10-12-2011, 01:54 PM

I still need a tune haha

LadyInRed · 10-12-2011, 08:51 PM

Might bring the Mustang out again, depending on how busy our morning is with cookout prep.

1998ta__1991rs · 10-12-2011, 09:02 PM

damn, gotta work

BAD BOB · 10-12-2011, 09:35 PM

might let the rcf see the dyno for the first time eva!

03SVTCOBRA · 10-12-2011, 09:36 PM

Quote:

Originally Posted by BAD BOB

might let the rcf see the dyno for the first time eva!

At least go last so you dont break it too early

Blue Skunk · 10-12-2011, 09:43 PM

Do you have to pre-register or is it first come first serve?

BAD BOB · 10-12-2011, 10:05 PM

Quote:

Originally Posted by 03SVTCOBRA

At least go last so you dont break it too early

what? break the car? bc that all that will probably break!

cliff-1972 · 10-12-2011, 11:14 PM

Jeff,able to dyno diesels yet???

10-12-2011, 09:08 AM	#1
Jeff@HHP Senior Member Join Date: Jan 2010 Location: North Charleston SC Posts: 170	HHP Carolina/SMAF Open Dyno Day 10/29/2011 from 9 am unitl... Ok guys you asked for it so here it is. SMAF is helping us host an open dyno day 10/29/2011 from 9 am unitl the last car is run. Dyno rates will be $30.00 for 2 pulls with wideband and print out. If you would like more runs you can get them after all the cars have been run. __________________ Jeff Hunter 888-894-1115 ext 306 843-206-0426 jeff@hhpracing.com http://www.hhpcarolina.com "The HHP Crew" Last edited by DolSVT00; 10-12-2011 at 10:21 AM.

10-12-2011, 09:11 AM	#2
jmd Senior Member Join Date: May 2008 Posts: 3,177	sounds like fun. __________________ Cadillac man

10-12-2011, 09:19 AM	#3
cobraetti Senior Member Join Date: Jul 2008 Location: goose creek, sc Posts: 274	will be alot of fast rides __________________

10-12-2011, 09:30 AM	#4
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Id like to throw mine on there with the race tune to check it out. IIRC your dyno isnt loaded correct? __________________ Gap A Hoe Racing

10-12-2011, 09:33 AM	#5
ForceFed4g63 Senior Member Join Date: Oct 2009 Location: Aiken Posts: 7,002	That's a great price! __________________ 2000 WS6 2005 CTS-V 2004 Titan QC 4x4

10-12-2011, 10:18 AM	#6
silver fox Senior Member Join Date: Mar 2009 Posts: 317	Do you have a way to read air fuel? Do you get to make changes between pulls?

10-12-2011, 10:30 AM	#9
yota Senior Member Join Date: Jun 2011 Location: Va Posts: 1,049	hate i'm going to miss out on this somebody post up plenty of pics and vids! __________________ 1999 Trans Am 2007.5 Dodge Mega Cab Cummins

10-12-2011, 11:13 AM	#10
Harry Senior Member Join Date: May 2008 Location: Summerville Posts: 3,321	I may have to bring mine for this.

10-12-2011, 11:31 AM	#11
PapaBear Senior Member Join Date: Aug 2010 Posts: 2,809	Wish it was AWD dyno.....

10-12-2011, 12:18 PM	#12
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Blazer might spin the rollers. Have to see if what we have done is getting put down to the ground __________________

10-12-2011, 01:54 PM	#13
Joker Senior Member Join Date: Jan 2011 Posts: 381	I still need a tune haha

10-12-2011, 08:51 PM	#14
LadyInRed Senior Member Join Date: Apr 2010 Location: Charleston Posts: 1,579	Might bring the Mustang out again, depending on how busy our morning is with cookout prep. __________________ 2011 Mustang 3.7L 6spd 2001 Ram 2500 Cummins TT 6spd 1998 Camaro Z28 LS1 6spd 1984 Camaro Z28

10-12-2011, 09:02 PM	#15
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	damn, gotta work __________________ Funny

10-12-2011, 09:35 PM	#16
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	might let the rcf see the dyno for the first time eva! __________________ IM BAD BOB

10-12-2011, 09:43 PM	#18
Blue Skunk Senior Member Join Date: Apr 2010 Location: LA (Ladson Area) Posts: 459	Do you have to pre-register or is it first come first serve? __________________ Street Turtle - 08 Shelby GT500 Daily Driver - 13 Ram 2500 Cummins Turbo Diesel Track Star - 68 F100

10-12-2011, 11:14 PM	#20
cliff-1972 Senior Member Join Date: Feb 2011 Location: Moncks Corner,S.C Posts: 292	Jeff,able to dyno diesels yet??? __________________ 1964 Impala 468BBC,T350 transbrake,4.30 9",10 point and 10.5 M/T's 1996 F250 4X4 12V Cummins,compound turbo 63mm over 75mm,cam,520cc pump,full billet 4R100 563hp&936ft.lbs w/a bad fuel pump and on a dynojet...just an old hunting truck