Looking for a new built short block

Shane361 · 07-10-2008, 08:39 AM

Hope all is well with each of you

I'm looking to turn the boost up on my KenneBell. I want to get an engine that can handle the power. My goal is alot of power without using race fuel. Thiking about running 20 pouinds of boost through the KB. Is that gonna be possible with a build block with no race gas? Thanks for any insight guys-Shane

slowgreen99 · 07-10-2008, 09:16 AM

Quote:

Originally Posted by Shane361

Hope all is well with each of you

I'm looking to turn the boost up on my KenneBell. I want to get an engine that can handle the power. My goal is alot of power without using race fuel. Thiking about running 20 pouinds of boost through the KB. Is that gonna be possible with a build block with no race gas? Thanks for any insight guys-Shane

The stock block can hold it.....

WWhittle · 07-10-2008, 09:23 AM

i ran 21 pounds (kenne bell 2.6) and 100 shot on mine- stock motor. if i remember correctly it made around 700hp and 750ft lbs torque.

slowgreen99 · 07-10-2008, 09:30 AM

and didnt donny run like 25-26 lbs and a 150 shot or somethin crazy on a stock block??

WWhittle · 07-10-2008, 10:04 AM

Quote:

Originally Posted by slowgreen99

and didnt donny run like 25-26 lbs and a 150 shot or somethin crazy on a stock block??

it was 30lbs, and 125 i believe. He lifted the heads twice and cracked the block the last time. i would not recommend that.

1998ta__1991rs · 07-10-2008, 10:06 AM

i had a friend when i was at NTI with a whipple on his, he had everything except bottom end and his made around 800 with about 26lbs of boost

Darryl Buckner · 07-10-2008, 11:35 AM

But Wes were you and Donnie running pump gas? Shane wants 20lbs on pump gas..

WWhittle · 07-10-2008, 01:14 PM

Quote:

Originally Posted by Darryl Buckner

But Wes were you and Donnie running pump gas? Shane wants 20lbs on pump gas..

i had 3 tunes- pump gas, race gas, and race gas and nitrous. Donny did not run pump gas.

20+ pounds of boost will start to test your fuel system. it's really best to go return style if you want to make that much boost. and the power it will make at 20+ pounds is useless unless you do a ton of other supporting mods. i would stay around 15-18 if it were me.

my car would spin the tires at over 100 miles an hour on the interstate when i ran my 17" in. wheels and drag radials. when i ran Donny on the interstate when he had his vette- my tires broke loose and the car hit the rev limiter at the top of fourth gear- however fast that is. no need for all that power.

WWhittle · 07-10-2008, 01:16 PM

i also would highly recommend that you pick your tuner carefully when running alot of boost on pump gas. i am not going to dog anyone out, but i can say that upstate south carolina is damn sure not the place to go with it.

1998ta__1991rs · 07-10-2008, 01:35 PM

Quote:

Originally Posted by streetsweeper

i also would highly recommend that you pick your tuner carefully when running alot of boost on pump gas. i am not going to dog anyone out, but i can say that upstate south carolina is damn sure not the place to go with it.

coughcough notamazon coughcough

Dan at Pro Dyno does alot with those cars and SCT

WWhittle · 07-10-2008, 01:37 PM

Quote:

Originally Posted by 1998ta__1991rs

coughcough notamazon coughcough

Dan at Pro Dyno does alot with those cars and SCT

lol, easy now- they might threaten to sue you.

Modular Powerhouse in Atlanta is second to none. I have never been to Dan, but i can tell you that it doesn't get any better than Modular Powerhouse.

Mike · 07-10-2008, 01:37 PM

20 pounds and pump gas do not mix very well. Take it from me I know.

Mine lived for a few months like that. The head gasket finally let go, blowing a chunk of the head with it. After tear down, we found that I was slowly damaging the pistons, valves, & guides with all the heat. Sad thing is my tuner told me not to run it like that.

Magoo · 07-10-2008, 01:50 PM

Shane your stock block can take most anything that 2.2 has to throw at it. There are plenty of guys running 18-20lbs making 620+ rwhp throught the stock motor on pump gas and having the motor live a long life. You just need to make sure you have enough injector, pumps, etc to support the power. Obviously you're not going to be able to maximize that kind of boost with pump gas as the timing is going to have to be turned down a bit to prevent detonation. You could also buy cases of torco to mix in with your pump gas to give you a little safety margin.

1998ta__1991rs · 07-10-2008, 01:51 PM

Quote:

Originally Posted by streetsweeper

lol, easy now- they might threaten to sue you.

Modular Powerhouse in Atlanta is second to none. I have never been to Dan, but i can tell you that it doesn't get any better than Modular Powerhouse.

yea they just might, but they earned that rep.

Shane361 · 07-10-2008, 02:02 PM

Appreciate all the inputs guys. I hear our pistons melt at like 700hp so just wanted to make sure everything was strong enough. Not sure if I mentioned my past 1 year headache but after I installed the KenneBell I blew the head gaskets automatically. Pretty sure it was damaged before I even got the car back cause it was already puking fluid and overheating. So I sorta have the money and was thinking like turbos or bigger supercharger or bigger better block with the 2.2. Was even considering a 5.4. What would you guys do with 10 grand and an 04 Cobra? Thanks again-Shane

Current Mod List
2.2 Kenne Bell
singe blade KB throttle body
kennebell boostapump
diablo predator
diablo mafia
3.4 upper
4lb lower
jlt cai
bassani mid with high flow cats
borla stinger cat back
60lb injectors

slowgreen99 · 07-10-2008, 02:38 PM

Quote:

Originally Posted by Shane361

Appreciate all the inputs guys. I hear our pistons melt at like 700hp so just wanted to make sure everything was strong enough. Not sure if I mentioned my past 1 year headache but after I installed the KenneBell I blew the head gaskets automatically. Pretty sure it was damaged before I even got the car back cause it was already puking fluid and overheating. So I sorta have the money and was thinking like turbos or bigger supercharger or bigger better block with the 2.2. Was even considering a 5.4. What would you guys do with 10 grand and an 04 Cobra? Thanks again-Shane

Current Mod List
2.2 Kenne Bell
singe blade KB throttle body
kennebell boostapump
diablo predator
diablo mafia
3.4 upper
4lb lower
jlt cai
bassani mid with high flow cats
borla stinger cat back
60lb injectors

Sell it and buy an LS1

Or if you cant find anything to do with it, send it my way!

Magoo · 07-10-2008, 03:45 PM

Quote:

Originally Posted by Shane361

Appreciate all the inputs guys. I hear our pistons melt at like 700hp so just wanted to make sure everything was strong enough. Not sure if I mentioned my past 1 year headache but after I installed the KenneBell I blew the head gaskets automatically. Pretty sure it was damaged before I even got the car back cause it was already puking fluid and overheating. So I sorta have the money and was thinking like turbos or bigger supercharger or bigger better block with the 2.2. Was even considering a 5.4. What would you guys do with 10 grand and an 04 Cobra? Thanks again-Shane

Current Mod List
2.2 Kenne Bell
singe blade KB throttle body
kennebell boostapump
diablo predator
diablo mafia
3.4 upper
4lb lower
jlt cai
bassani mid with high flow cats
borla stinger cat back
60lb injectors

With that kind of budget I would go turbo with a nice fuel system. going that route you can make 700+ on pump gas and 800+ on race without lifting the valve covers on the motor.

LXtasy · 07-10-2008, 04:23 PM

mmmmm turbo

Darryl Buckner · 07-10-2008, 05:11 PM

Navagator 5.4, good internals, blower or turbo. You can't beat that cubic inch for torque, and last time I checked a Cobra is no lightweight..

Darryl Buckner · 07-10-2008, 05:14 PM

But in hind site, there is probably a few other things that will need to change with going to the 5.4. Like 6 speed stuff, ect. Hell Wes's Cobra ran really good, and I don't think he had all the crazy stuff Donnie had. 10,000 might get you there, I think he even had the IRS still..

07-10-2008, 08:39 AM	#1
Shane361 Senior Member Join Date: Aug 2007 Location: The Creek Posts: 2,622	Looking for a new built short block Hope all is well with each of you I'm looking to turn the boost up on my KenneBell. I want to get an engine that can handle the power. My goal is alot of power without using race fuel. Thiking about running 20 pouinds of boost through the KB. Is that gonna be possible with a build block with no race gas? Thanks for any insight guys-Shane

07-10-2008, 09:30 AM	#4
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	and didnt donny run like 25-26 lbs and a 150 shot or somethin crazy on a stock block?? __________________ M.R.E. Bad Bob Motorsports

07-10-2008, 10:06 AM	#6
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	i had a friend when i was at NTI with a whipple on his, he had everything except bottom end and his made around 800 with about 26lbs of boost __________________ Funny

07-10-2008, 01:50 PM	#13
Magoo Senior Member Join Date: Mar 2007 Posts: 925	Shane your stock block can take most anything that 2.2 has to throw at it. There are plenty of guys running 18-20lbs making 620+ rwhp throught the stock motor on pump gas and having the motor live a long life. You just need to make sure you have enough injector, pumps, etc to support the power. Obviously you're not going to be able to maximize that kind of boost with pump gas as the timing is going to have to be turned down a bit to prevent detonation. You could also buy cases of torco to mix in with your pump gas to give you a little safety margin. __________________ Black 2003 Cobra Ported, Upper/Lower Pullied, Sprayed......going corn Slow 2010 BMW 335i JB4-G5iso, DCI, E85 2002 GSX-R600 Full Bolt-ons

07-10-2008, 02:02 PM	#15
Shane361 Senior Member Join Date: Aug 2007 Location: The Creek Posts: 2,622	Appreciate all the inputs guys. I hear our pistons melt at like 700hp so just wanted to make sure everything was strong enough. Not sure if I mentioned my past 1 year headache but after I installed the KenneBell I blew the head gaskets automatically. Pretty sure it was damaged before I even got the car back cause it was already puking fluid and overheating. So I sorta have the money and was thinking like turbos or bigger supercharger or bigger better block with the 2.2. Was even considering a 5.4. What would you guys do with 10 grand and an 04 Cobra? Thanks again-Shane Current Mod List 2.2 Kenne Bell singe blade KB throttle body kennebell boostapump diablo predator diablo mafia 3.4 upper 4lb lower jlt cai bassani mid with high flow cats borla stinger cat back 60lb injectors Last edited by Shane361; 07-10-2008 at 02:06 PM.

07-10-2008, 09:23 AM	#3
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	i ran 21 pounds (kenne bell 2.6) and 100 shot on mine- stock motor. if i remember correctly it made around 700hp and 750ft lbs torque.

07-10-2008, 11:35 AM	#7
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	But Wes were you and Donnie running pump gas? Shane wants 20lbs on pump gas..

07-10-2008, 01:16 PM	#9
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	i also would highly recommend that you pick your tuner carefully when running alot of boost on pump gas. i am not going to dog anyone out, but i can say that upstate south carolina is damn sure not the place to go with it.

07-10-2008, 01:37 PM	#12
Mike Senior Member Join Date: Dec 2006 Location: Goose Creek, SC Posts: 5,481	20 pounds and pump gas do not mix very well. Take it from me I know. Mine lived for a few months like that. The head gasket finally let go, blowing a chunk of the head with it. After tear down, we found that I was slowly damaging the pistons, valves, & guides with all the heat. Sad thing is my tuner told me not to run it like that.

07-10-2008, 04:23 PM	#18
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	mmmmm turbo __________________

07-10-2008, 05:11 PM	#19
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	Navagator 5.4, good internals, blower or turbo. You can't beat that cubic inch for torque, and last time I checked a Cobra is no lightweight..

07-10-2008, 05:14 PM	#20
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	But in hind site, there is probably a few other things that will need to change with going to the 5.4. Like 6 speed stuff, ect. Hell Wes's Cobra ran really good, and I don't think he had all the crazy stuff Donnie had. 10,000 might get you there, I think he even had the IRS still..