69 Chevelle ls turbo build

98Camarod · 01-18-2016, 05:38 PM

I got it running this past Friday as planned. I had a couple mishaps along the way that day though. The feed line at the discharge of the pump was leaking badly, but didn't show its ugly face until the pump was started. Trans line on the bottom cooler line is leaking. Well it's the 1/2npt to 6an fitting. The fuel pressure gauge that sends to the Holley doesn't match my new mechanical gauge. I've tried all different offsets, and no luck. Oil pressure was pegged. So I went and got a new sensor from autozone and it's good now. Idles at 46psi. I've ordered a new fitting and sensor, so I should have them shortly.

All the lights, boost controller, efi, compressor, intercooler pump, and meth kit all work correctly though!

01-18-2016, 05:38 PM	#22
98Camarod Senior Member Join Date: Mar 2009 Location: Summerville, SC Posts: 1,525	I got it running this past Friday as planned. I had a couple mishaps along the way that day though. The feed line at the discharge of the pump was leaking badly, but didn't show its ugly face until the pump was started. Trans line on the bottom cooler line is leaking. Well it's the 1/2npt to 6an fitting. The fuel pressure gauge that sends to the Holley doesn't match my new mechanical gauge. I've tried all different offsets, and no luck. Oil pressure was pegged. So I went and got a new sensor from autozone and it's good now. Idles at 46psi. I've ordered a new fitting and sensor, so I should have them shortly. All the lights, boost controller, efi, compressor, intercooler pump, and meth kit all work correctly though!