First Mod in a year to the vette

[Magoo]

<----jealous

[1 Slow Z]

Originally Posted by FRDnemesis

I work for CGI Federal now. Left Ready SC last week.

jeff

Where do you work Jeff? I also work for CGI (formerly Stanley). What project are you supporting?

[snakeplissken]

Originally Posted by FRDnemesis

Should be ZR1 hp "territory", maybe a little north.

Really? With a cam and tune?

[Derek]

Originally Posted by snakeplissken

Really? With a cam and tune?

If im not mistaken he has an ls7 427 ci I think the zr1 ls9 is 376 ish ci with a blower to make up the rest of the power.Could be done, thats a bad bitch Jeff.

[ElecTech]

Originally Posted by ShawnBoyMoody

This moistens me. Sounds nasty!

Gross.

[Derek]

Originally Posted by ElecTech

Gross.

must have hit the brown note!

[FRDnemesis]

Originally Posted by 1 Slow Z

Where do you work Jeff? I also work for CGI (formerly Stanley). What project are you supporting?

I'm at the Southrail facility working on the BFT program.

Originally Posted by snakeplissken

Really? With a cam and tune?

No, there are a nice little list of supporting mods. Car made 508RWHP before the cam with a poor tune, to say the least!

[1 Slow Z]

Originally Posted by FRDnemesis

I'm at the Southrail facility working on the BFT program.

Damn I didn't know that. I might have to come over that way and pay you a visit. What do you think about CGI thus far? Stanley was a pretty good company but CGI might not be as good, especially for us salary folks.

[FRDnemesis]

Originally Posted by 1 Slow Z

Damn I didn't know that. I might have to come over that way and pay you a visit. What do you think about CGI thus far? Stanley was a pretty good company but CGI might not be as good, especially for us salary folks.

Not sure how it was before w/Stanley. But in my experience of working for DOD contractors that were doing well, buyouts have turned the ship upside down

[1 Slow Z]

Originally Posted by FRDnemesis

Not sure how it was before w/Stanley. But in my experience of working for DOD contractors that were doing well, buyouts have turned the ship upside down

That's what it seems like is going on, but I guess we'll have to wait and see. Is Katsu Cannon your PM?

[FRDnemesis]

Originally Posted by 1 Slow Z

That's what it seems like is going on, but I guess we'll have to wait and see. Is Katsu Cannon your PM?

Jesse Stament

[1 Slow Z]

Originally Posted by FRDnemesis

Jesse Stament

Oh yea that's right. We need to get up with each other sometime. Maybe you should come out to SSS more often?

[chrisheltra]

I know several people over at south rail. I think Bgstew6 works over there.

[ElecTech]

Originally Posted by FRDnemesis

Jesse Stament

Tell Jesse I said whas up, Air Force rules! and if Juan is still there, tell him I said he was a bitch and I'll be gappin that Subi soon.

Good luck.

[FRDnemesis]

Originally Posted by ElecTech

Tell Jesse I said whas up, Air Force rules! and if Juan is still there, tell him I said he was a bitch and I'll be gappin that Subi soon.

Good luck.

Juan got a good laugh out of that! I let him read this and stew on it for a few seconds before I told him who it was.........

[Carlrx7]

cars sounds real good,

what do zr1's put down? 580whp? you should be close if not more than that, if ls3's can hit over 500 with a cam plus bolt on you should be able to hit 600, if not get really close!

hows the tune going?

-Carl

[FRDnemesis]

Originally Posted by Carlrx7

cars sounds real good,

what do zr1's put down? 580whp? you should be close if not more than that, if ls3's can hit over 500 with a cam plus bolt on you should be able to hit 600, if not get really close!

hows the tune going?

-Carl

I hope thats the case Carl...... Most LS7 guys are getting around 50-60RWHP with this cam and the same bolt-ons that I currently have. So I'll keep my fingers crossed.