Converter seal trick

Derek · 08-01-2011, 04:11 PM

This maybe common knowledge idk.If you are not replacing the converter and it is visibly worn on the outer sleeve a new seal will still leak a little. But try this before you pop it back in. Take the spring out look for a little mark. sorry crappy cell pics

Twist the spring counterclockwise with both hands it will come apart with a male and female end

clip about an 1/8 to 1/4 inch (depending on how bad the groove is) off the female end.Screw it back together install.

Old mechanic showed me this works like a charm

Carlrx7 · 08-01-2011, 08:47 PM

did you stay at a holiday inn express last night?

08-01-2011, 04:11 PM	#1
Derek Senior Member Join Date: Nov 2009 Location: West of the mutha f**cking Ashley Posts: 1,784	Converter seal trick This maybe common knowledge idk.If you are not replacing the converter and it is visibly worn on the outer sleeve a new seal will still leak a little. But try this before you pop it back in. Take the spring out look for a little mark. sorry crappy cell pics Twist the spring counterclockwise with both hands it will come apart with a male and female end clip about an 1/8 to 1/4 inch (depending on how bad the groove is) off the female end.Screw it back together install. Old mechanic showed me this works like a charm

08-01-2011, 08:47 PM	#2
Carlrx7 Senior Member Join Date: Apr 2010 Location: Ladson,SC Posts: 3,813	did you stay at a holiday inn express last night? __________________ Dark Aladdin