CHP Track Rental and List of participants! - Page 11

2001hawk · 09-17-2012, 03:49 PM

SBM should be sending in mine.

LXtasy · 09-17-2012, 04:42 PM

Quote:

Originally Posted by jmd

we need a gto that can break 9's in the 1/8. i can't do it. come on down. you can do either for payment.

Get the nitrous outlet plate from adam. Problem solved

RoadconeTuning · 09-17-2012, 05:12 PM

Quote:

Originally Posted by jmd

we need a gto that can break 9's in the 1/8. i can't do it. come on down. you can do either for payment.

I think Russ went 8.teens at Carolina on 19 Nexens... pretty sure hes shooting for some 7.70's or so now that hes on Pilot Super Sports.

bwelch · 09-17-2012, 06:20 PM

Mine went 7.97 on 18" nexen. Never could get better than 7.80 on drag radials. I think my camshaft was to big on the duration side for a 4,000lb heep.

jmd · 09-17-2012, 06:41 PM

Quote:

Originally Posted by RoadconeTuning

I think Russ went 8.teens at Carolina on 19 Nexens... pretty sure hes shooting for some 7.70's or so now that hes on Pilot Super Sports.

what are his mods?

Quote:

Originally Posted by bwelch

Mine went 7.97 on 18" nexen. Never could get better than 7.80 on drag radials. I think my camshaft was to big on the duration side for a 4,000lb heep.

yours was a h/c/i. mine is no where near that. i am headers and a tune on street tires.

jmd · 09-17-2012, 06:44 PM

Quote:

Originally Posted by LXtasy

Get the nitrous outlet plate from adam. Problem solved

what about the rest of the kit? i need that too don't I? lol

ShawnBoyMoody · 09-17-2012, 06:53 PM

2001hawk's payment has been sent.

silver455 · 09-17-2012, 06:58 PM

Quote:

Originally Posted by jmd

what are his mods?

Stock

s14.5gonewide · 09-17-2012, 06:59 PM

how much is a tnt or do you have to compete in a class?? might bring a cobra..

2001hawk · 09-17-2012, 07:04 PM

Quote:

Originally Posted by ShawnBoyMoody

2001hawk's payment has been sent.

TY for saving me the time and hassle. Deserves a rep in my book.

ShawnBoyMoody · 09-17-2012, 07:07 PM

Quote:

Originally Posted by 2001hawk

TY for saving me the time and hassle. Deserves a rep in my book.

You're welcome buddy.

03SVTCOBRA · 09-17-2012, 07:10 PM

I didnt read all the pages, but is the pre-pay required? I cant really plan that far ahead but am going to try and make it and probably run in a index just have no idea which atm.

ShawnBoyMoody · 09-17-2012, 07:11 PM

Not required just trying to get the track paid for in advance if possible. You can pay at the gate. Brandon might start charging more the later it gets though. Gotta watch these shifty promoters...

chrisheltra · 09-17-2012, 07:21 PM

Anybody on the fence should definitely join up. CHP track days are always a good time.

LXtasy · 09-17-2012, 08:23 PM

Quote:

Originally Posted by jmd

what about the rest of the kit? i need that too don't I? lol

WE got you covered. I have pieces laying around

jmd · 09-17-2012, 08:35 PM

Quote:

Originally Posted by silver455

Stock

i find that hard to believe. i think i asked him on the fastgm forum before. i thought he had bolton's.

GreebeanZ28 · 09-17-2012, 08:59 PM

Quote:

Originally Posted by jmd

i find that hard to believe. i think i asked him on the fastgm forum before. i thought he had bolton's.

Ls2, about every bolt on. Went 8.02/91 mph on some old ass 19 inch nexans. Really hoping for 7.x now.

Matts94Z28 · 09-17-2012, 09:01 PM

Quote:

Originally Posted by GreebeanZ28

Ls2, about every bolt on. Went 8.02/91 mph on some old ass 19 inch nexans. Really hoping for 7.x now.

Better gear up for the run your mouth class!

slowgreen99 · 09-17-2012, 09:25 PM

I'm far from promoting! Just lending a hand lol. And thanks to all who have paid. It helps get organization and ease of mind

Miker · 09-17-2012, 10:02 PM

My PB was 8.22 @ Dorchester bone stock (Just a canned tune) on AutoX tires.

Should be in the 7s on the new motor.

I know people have 1/8th to 1/4 mile calculators; how fast do you calculate I will run based off this video? :-P

http://www.youtube.com/watch?v=qe9AL1hNI50

*Edit* The -2 degrees of camber I run in the back for AutoX is get for 60ft times.

09-17-2012, 03:49 PM	#201
2001hawk Senior Member Join Date: Aug 2010 Posts: 1,224	SBM should be sending in mine. __________________ People call me John, Jim, or Bobby.

09-17-2012, 06:20 PM	#204
bwelch Senior Member Join Date: Aug 2009 Posts: 3,774	Mine went 7.97 on 18" nexen. Never could get better than 7.80 on drag radials. I think my camshaft was to big on the duration side for a 4,000lb heep. __________________

09-17-2012, 06:53 PM	#207
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	2001hawk's payment has been sent. __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

09-17-2012, 06:59 PM	#209
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	how much is a tnt or do you have to compete in a class?? might bring a cobra.. __________________

09-17-2012, 07:10 PM	#212
03SVTCOBRA Senior Member Join Date: Jul 2011 Posts: 2,041	I didnt read all the pages, but is the pre-pay required? I cant really plan that far ahead but am going to try and make it and probably run in a index just have no idea which atm. __________________ [SIGPIC][/SIGPIC]

09-17-2012, 07:11 PM	#213
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	Not required just trying to get the track paid for in advance if possible. You can pay at the gate. Brandon might start charging more the later it gets though. Gotta watch these shifty promoters... __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!" Last edited by ShawnBoyMoody; 09-17-2012 at 07:14 PM.

09-17-2012, 07:21 PM	#214
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Anybody on the fence should definitely join up. CHP track days are always a good time. __________________ Gap A Hoe Racing

09-17-2012, 09:25 PM	#219
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	I'm far from promoting! Just lending a hand lol. And thanks to all who have paid. It helps get organization and ease of mind __________________ M.R.E. Bad Bob Motorsports

09-17-2012, 10:02 PM	#220
Miker Senior Member Join Date: Mar 2010 Location: Goose Creek, SC Posts: 811	My PB was 8.22 @ Dorchester bone stock (Just a canned tune) on AutoX tires. Should be in the 7s on the new motor. I know people have 1/8th to 1/4 mile calculators; how fast do you calculate I will run based off this video? :-P http://www.youtube.com/watch?v=qe9AL1hNI50 Edit The -2 degrees of camber I run in the back for AutoX is get for 60ft times. __________________ 06 GTO-aro AutoXer Printing my car's CARFAX uses a lot of toner. Last edited by Miker; 09-17-2012 at 10:07 PM.