![]() |
|
|
#1 |
|
Senior Member
Join Date: Aug 2009
Location: Ladson SC
Posts: 4,388
|
I have two sets of rims, with tires mounted.
one set is Toyota rims, that are on my tahoe they were fine at stock height. lowered, they rub, and it annoys my wife, who complains, and that annoys me. ![]() bridgestone dueler alenza's 275-55/20 all four have good tread, except the inner shoulders are wore where the camber was off. ![]() one of the TPMS sensors is jenky, it works 90% of the time, but sometimes, it don't....and the wife complains..... thinking ~$600 for these. $650 with lugnuts & locking lugs. other set is Gear 701's, with Nankang tires, tires are nearly NEW. rims are ok, missing 2 center caps. ![]() doubt they have TPMS. but they are bolt on & go. thinking $400 for these. $450 with lug nuts. and I have the correct small lugnuts for these rims, OEM lugnuts are too big for aftermarket rims. add $50 if you want me to supply the lugnuts for either set. so basically, i would like a newer set of 6 lug chevy rims, with tires, with TPMS that is ready to bolt on & go. have to be 20's or bigger, because the lowering spindles would hit 17's. I know that's a stretch....but figured I would ask, because most of you guys have stuff..... (but nobody has as much as Nathan....) if someone had 275-45/20, I could put those back on my toyota rims. it's just confusing to think about it all.
__________________
1 Timothy 3:16 16 And without controversy great is the mystery of godliness: God was manifested in the flesh, Justified in the Spirit, Seen by angels, Preached among the Gentiles, Believed on in the world, Received up in glory. |
|
|
|
![]() |
|
|