transmission blues

Kwiksilver · 12-23-2012, 07:00 PM

My 07 mustang auto transmission went from fine to shit. I drove the car today it was fine. Hammered on it a few times no issues. Drove it home parked it and a few hours later went to move it and nothing. Put it in reverse and it kinda jumps a tiny bit but no moving. It then gives me a flashing od-off light and a wrench. I can put the shifter in first and it will move forward like normal just no reverse. While it does that the display reads odo error. Got a p0720 code which is output shaft speed sensor. WTH?

MonteC · 12-23-2012, 08:48 PM

Put a scan tool on it and see if you get a reading from your output shaft speed sensor. If the odo reads off that sensor you will have an error.

Could be a bad sensor.

Kwiksilver · 12-26-2012, 09:42 PM

Unhooked the battery and reseated the box in the pass footwell. Put the battery cable on and... Taadaa it works. No fucking idea but it works fine now.

ShawnBoyMoody · 12-26-2012, 09:49 PM

For sell?

Kwiksilver · 12-26-2012, 10:05 PM

Quote:

Originally Posted by ShawnBoyMoody

For sell?

For sold

Matts94Z28 · 12-27-2012, 01:37 AM

I'd sale it.

MonteC · 12-27-2012, 08:25 AM

Quote:

Originally Posted by Kwiksilver

Unhooked the battery and reseated the box in the pass footwell. Put the battery cable on and... Taadaa it works. No fucking idea but it works fine now.

Because you cleared the fault from the computers memory. Whatever was causing the problem must be intermittent.

12-23-2012, 07:00 PM	#1
Kwiksilver Senior Member Join Date: Mar 2011 Posts: 475	transmission blues My 07 mustang auto transmission went from fine to shit. I drove the car today it was fine. Hammered on it a few times no issues. Drove it home parked it and a few hours later went to move it and nothing. Put it in reverse and it kinda jumps a tiny bit but no moving. It then gives me a flashing od-off light and a wrench. I can put the shifter in first and it will move forward like normal just no reverse. While it does that the display reads odo error. Got a p0720 code which is output shaft speed sensor. WTH? __________________ 66 ford f100 shoptruck. 351 cleveland 4v, CJ heads, holley 750, toploader 4spd, rust.

12-23-2012, 08:48 PM	#2
MonteC Senior Member Join Date: Oct 2009 Location: Summerville Posts: 4,431	Put a scan tool on it and see if you get a reading from your output shaft speed sensor. If the odo reads off that sensor you will have an error. Could be a bad sensor. __________________ Griffin Transmission -Home of the most badassest Monte Carlo- Cell: 843-276-0554 Shop: 843-793-4607 04 RSX 06 Ridgeline 86 Monte Carlo

12-26-2012, 09:42 PM	#3
Kwiksilver Senior Member Join Date: Mar 2011 Posts: 475	Unhooked the battery and reseated the box in the pass footwell. Put the battery cable on and... Taadaa it works. No fucking idea but it works fine now. __________________ 66 ford f100 shoptruck. 351 cleveland 4v, CJ heads, holley 750, toploader 4spd, rust.

12-26-2012, 09:49 PM	#4
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	For sell? __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

12-27-2012, 01:37 AM	#6
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	I'd sale it. __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack