99 mustang 4.6 parts

[derek0122]

Trying to get my gt a lil bit faster . Looking for some headers for a 4.6 and any other go fast goodies . Thanks

[1SMKN99]

I've got a bunch of 4.6 parts.

[Shane361]

Headers are the worst bang for the buck. What is your current set up?

[1SMKN99]

I've got mac lt headers and bbk xpipe ill sell for $300. Bunch of other stuff too.

[derek0122]

Shane right now I'm pretty much stock except for bbk cold air intake and 373 gears

[Shane361]

Originally Posted by derek0122

Shane right now I'm pretty much stock except for bbk cold air intake and 373 gears

I believe your CAI in metal, look into a JLT. Replace your upper intake with a 75mm Accufab. If your standard 3.73s are ok, I installed 4.10s in my 04 Mach1 and 4.10s in my auto 02 GT. In terms of cheap mods gears are the best bang for the buck IMO. If your auto you can change out your converter. Keep an eye out for your lower plastic intake, known to fail. Replace it with a metal one if the time ever comes and don't shoot it with that plastic shit. Your rather limited with that car unless you get blown and then looking around 400rwhp, till you blow your motor anyways.

PS. Buy the set up from 1smkn99.

[slowgreen99]

Leave it roughly stock, and put 125 on it.

[TLyons90]

Originally Posted by slowgreen99

Leave it roughly stock, and put 125 on it.

Or pull a 1smk99 and throw a 200 on her and let it eat!

[slowgreen99]

Mine lasted until i pulled it with 125.....on the daily basis....for about 2 years lol

[1SMKN99]

Originally Posted by TLyons90

Or pull a 1smk99 and throw a 200 on her and let it eat!

Hey, go big or go home. Lol. I wouldn't run nitrous on the stock intake though.

[derek0122]

Yea I've already had problems with one intake cracking at the thermostat . They pretty much suck balls . And since this is my dd I don't wanna get to outrageous . Just tired of gettin ragged by the LS peoples .

[Shane361]

Originally Posted by derek0122

Yea I've already had problems with one intake cracking at the thermostat . They pretty much suck balls . And since this is my dd I don't wanna get to outrageous . Just tired of gettin ragged by the LS peoples .

Sorry man, your gonna need a lot more than bolt-ons to fix that. Your starting with a platform that isn't great. Save for an 03/04 Cobra....or wait for the post that says join the LS Nation.

[1SMKN99]

I've got an aluminum trickflow intake setup fs too.

[derek0122]

Hahaha Shane I've already got a ls camaro . Just wanted to beef up the ole stang also . I know it's hard to make a 4.6 keep up with a5.7 an bigger but still wanted to try lol

[1SMKN99]

Originally Posted by derek0122

Hahaha Shane I've already got a ls camaro . Just wanted to beef up the ole stang also . I know it's hard to make a 4.6 keep up with a5.7 an bigger but still wanted to try lol

I got a few ls kills with my 4.6 lol.

[ForceFed4g63]

Originally Posted by 1SMKN99

I got a few ls kills with my 4.6 lol.

But still no SRT-4 kill :P

[RoadconeTuning]

heres the deal for the upper plenum... everyone says its too big but thats basically impossible on that motor.

http://www.americanmuscle.com/bbk-78...003&adtype=pla

[1SMKN99]

Originally Posted by ForceFed4g63

But still no SRT-4 kill :P

Oh really?
https://www.youtube.com/watch?v=l4Um...e_gdata_player

And yes I'm taking that win lol.

[RoadconeTuning]

Originally Posted by derek0122

Hahaha Shane I've already got a ls camaro . Just wanted to beef up the ole stang also . I know it's hard to make a 4.6 keep up with a5.7 an bigger but still wanted to try lol

a set of HiTek Stage 2 cams, x-pipe, mufflers, 78mm TB/Plenum and a good cold air with a good tune should put you over 300whp. should... Its a lot easier to just throw a 100 shot on it and swap out the midpipe tho. thats what i wish i had done.

[ForceFed4g63]

Originally Posted by 1SMKN99

Oh really?
https://www.youtube.com/watch?v=l4Um...e_gdata_player

And yes I'm taking that win lol.

Dammit I forgot about that lol