new project - Page 3

MARTYROBBINS · 12-06-2012, 02:54 PM

I say leave the body alone install supercharged mod mota= charleston farm truck

1SMKN99 · 12-06-2012, 03:13 PM

dad wants it to look good, i just want it to haul ass lol

BLO BY U - TA · 12-06-2012, 08:11 PM

Good looking truck...

I have a 51 that I'm working on...this is how it looked 4 months ago. It had the stock rear and a volare front end then. Now it has 4 link 9" c-notch and mustang II with air bags all around. Its torn apart now but It will look just like that when it goes back together....finally got the motor in it (SBC) this week and just need time to finish.

Patina rods are in!

Silver-Dollar · 12-06-2012, 08:32 PM

http://charleston.craigslist.org/pts/3394811813.html

1SMKN99 · 03-22-2014, 09:26 AM

Well we have sold the 66' and bought a 56' and started working on it then got a 54' then bought another 56'.

Past couple weeks we have the frame finished and got the irs setup on the rear finished

Bradleyrj · 03-22-2014, 10:48 AM

Damn I wish I would have known you were selling the 66.

1SMKN99 · 03-22-2014, 11:17 AM

Quote:

Originally Posted by Bradleyrj

Damn I wish I would have known you were selling the 66.

We have another 56 for sale

RoadconeTuning · 03-23-2014, 04:05 PM

whats the irs based off of? looks cool

1SMKN99 · 03-23-2014, 04:53 PM

Quote:

Originally Posted by RoadconeTuning

whats the irs based off of? looks cool

Got it off a lincoln mark viii

Blue Skunk · 03-23-2014, 09:16 PM

Quote:

Originally Posted by 1SMKN99

well we've been slackin taking our time but we got it stripped down to the frame and now have a front end off a 2008 crown vic on it so it will not handle like total shit, and will have power steering and disc brakes. currently installing a 8.8 with a four link suspension on the rear.

How hard was this? I just picked up a 68 and am considering this mod.

1SMKN99 · 03-24-2014, 05:25 AM

Quote:

Originally Posted by Blue Skunk

How hard was this? I just picked up a 68 and am considering this mod.

the front setup was suprisingly easy, cut the old k member out, drill two holes and it bolted right up on the 66'. The rear was a little bit more involved but wasnt that bad. we had planned on just doing a four link in the rear until i found a running mark viii on cl for $600 and we parted it out and just stole the irs off it.

crumbie · 03-24-2014, 08:38 AM

Quote:

Originally Posted by 1SMKN99

well we've been slackin taking our time but we got it stripped down to the frame and now have a front end off a 2008 crown vic on it so it will not handle like total shit, and will have power steering and disc brakes. currently installing a 8.8 with a four link suspension on the rear.

this is the same setup a friend of mine is doing to his 66 f100. crown vic front and 8.8 rear. he went with an LS3 motor though. LOL

1SMKN99 · 03-24-2014, 11:34 AM

Quote:

Originally Posted by crumbie

this is the same setup a friend of mine is doing to his 66 f100. crown vic front and 8.8 rear. he went with an LS3 motor though. LOL

i tried talking my dad into doing an ls in the truck but we got a running 5.8 motor, trans, computer, harness and all for free.

crumbie · 03-24-2014, 01:07 PM

Quote:

Originally Posted by 1SMKN99

i tried talking my dad into doing an ls in the truck but we got a running 5.8 motor, trans, computer, harness and all for free.

10-4 can't beat free.

Matts94Z28 · 03-24-2014, 01:58 PM

LS beats free every day

1SMKN99 · 03-24-2014, 02:01 PM

Quote:

Originally Posted by Matts94Z28

LS beats free every day

honda motor beats LT1 every day

94FormulaBird · 03-24-2014, 02:03 PM

Quote:

Originally Posted by 1SMKN99

honda motor beats LT1 every day

drunk at 2pm...tisk tisk

Bradleyrj · 03-24-2014, 03:01 PM

Quote:

Originally Posted by 1SMKN99

We have another 56 for sale

Does it already have Mustang II front end under it?

1SMKN99 · 03-24-2014, 03:42 PM

Quote:

Originally Posted by Bradleyrj

Does it already have Mustang II front end under it?

No it has stock shit under there.

1SMKN99 · 03-29-2014, 12:00 PM

Got the front end finished

12-06-2012, 03:13 PM	#42
1SMKN99 Senior Member Join Date: May 2012 Posts: 1,239	dad wants it to look good, i just want it to haul ass lol __________________ LSX Mustang in process.

12-06-2012, 08:32 PM	#44
Silver-Dollar Senior Member Join Date: Jun 2008 Location: Summerville Posts: 1,019	http://charleston.craigslist.org/pts/3394811813.html __________________ 2011 Tundra Crewmax Platinum

03-22-2014, 09:26 AM	#45
1SMKN99 Senior Member Join Date: May 2012 Posts: 1,239	Well we have sold the 66' and bought a 56' and started working on it then got a 54' then bought another 56'. Past couple weeks we have the frame finished and got the irs setup on the rear finished __________________ LSX Mustang in process.

03-22-2014, 10:48 AM	#46
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	Damn I wish I would have known you were selling the 66. __________________

03-23-2014, 04:05 PM	#48
RoadconeTuning Senior Member Join Date: Jun 2008 Location: Upstate, SC Posts: 2,684	whats the irs based off of? looks cool __________________ FIRSBIRZ

12-06-2012, 02:54 PM	#41
MARTYROBBINS Senior Member Join Date: Nov 2011 Location: NORTH CHARLESTON Posts: 593	I say leave the body alone install supercharged mod mota= charleston farm truck

03-24-2014, 01:58 PM	#55
Matts94Z28 Senior Member Join Date: Apr 2008 Location: Summerville Posts: 12,039	LS beats free every day __________________ Charleston Performance Solutions 4560 Rivers Ave. N. Charleston SC 29405 843-225-1142 https://www.facebook.com/CharlestonPerformanceSolutions www.facebook.com/Selepack

03-29-2014, 12:00 PM	#60
1SMKN99 Senior Member Join Date: May 2012 Posts: 1,239	Got the front end finished __________________ LSX Mustang in process.