E.T. List - Page 10

chrisheltra · 12-14-2008, 04:47 PM

Quote:

Originally Posted by slowgreen99

I was talkin about needing to remove some. Im not anywhere near your hp/tq numbers either though!

Lurch · 12-16-2008, 01:45 AM

Good job Chris I'm glad for you you deserve it!!!

chrisheltra · 12-16-2008, 08:47 AM

Quote:

Originally Posted by Lurch

Good job Chris I'm glad for you you deserve it!!!

Thanks bud it was nice seeing you today.

Magoo · 12-16-2008, 12:13 PM

Congrats on the new best Chris!

Ronnie · 12-20-2008, 04:56 PM

No updates to the list, but I should be updating it soon after I get back from the sandbox. I am pretty sure some of you seen the beast sitting by AVT's. The aluminum block is being bored .020, high compression coated diamond pistons and Oliver billet rods are being thrown in the block to handle 26 psi of boost. Heads are extensively ported with 1.50 exhaust valves--aftermarket are up to 1.45. That should be one of the tickets. 3.4 Whipple is being treated to big intake plenum and spacer. Custom ground cams for the heads and charger combo. Complete fuel system to include either 75# or 89# injectors. And, to top it off some more weight reduction. 9's or bust!!!!

WWhittle · 01-15-2009, 11:43 PM

isn't this out of date? i believe 1Iron is on top now isnt he? 6.teen or something like that?

Mike · 01-15-2009, 11:54 PM

Quote:

Originally Posted by streetsweeper

isn't this out of date? i believe 1Iron is on top now isnt he? 6.teen or something like that?

I only update it when a post is made in this thread asking for an update on someone's time.

Did I miss a post by Paul asking for an update?

chrisheltra · 01-15-2009, 11:56 PM

Quote:

Originally Posted by streetsweeper

isn't this out of date? i believe 1Iron is on top now isnt he? 6.teen or something like that?

Hes not on top until he post his time and preferably with a timeslip at that speed.

Bradleyrj · 01-16-2009, 12:05 AM

Can I be included if I was driving someone elses car??? even it was a new best for me?

wade w · 03-22-2009, 09:14 PM

Damn we had fun. The first pass on the bottle I messed up the launch a little. It got a 1.51 60ft. Wre it normally gets a 1.39. It still went a 6.31 at 112.9 and 9.89 at 134.7.

wade w · 03-22-2009, 09:18 PM

Damn we had fun. The first pass on the bottle I messed up the launch a little. It got a 1.51 60ft. Were it normally gets a 1.39. It still went a 6.31 at 112.9 and 9.89 at 134.7. The next pass it went a 6.15 at 111.6 but they did not give me any 1/4 info. I think it would have been at least a 9.7 something maybe even a 9.6. Next pass was bad. We ran out of nitrous. Couldnt make any more runs it was passed 5.

chrisheltra · 03-22-2009, 09:43 PM

Went to the track tonight and got a slip

1.50 60'
7.64 ET
87.5 MPH

LOL too bad it was a dud slip.

Seems this list hasnt been updated in a while.

Illusions · 04-16-2009, 08:53 AM

Wow I just looked at the ET list and thought damn, I can hang with these guys... I should be about midway on the list.. Then I realized I was looking at the 1/4 times not the 1/8. I'll go back in my corner now .

chrisheltra · 04-16-2009, 07:40 PM

Quote:

Originally Posted by Illusions

Wow I just looked at the ET list and thought damn, I can hang with these guys... I should be about midway on the list.. Then I realized I was looking at the 1/4 times not the 1/8. I'll go back in my corner now .

dkbmxer002 · 04-26-2009, 06:08 PM

6.703 @ 98.53 :lmao: damn third gear coasting...

chrisheltra · 04-26-2009, 08:05 PM

Just realized that I never posted my new 1/8 and 1/4 PB times from Darlington after Randy and I went there last so here it is.

bambooi · 11-02-2009, 08:33 PM

i guess ill post mine up.

12-16-2008, 01:45 AM	#182
Lurch Moderator Join Date: Jan 2007 Location: Goose Creek SC Posts: 554	Times Good job Chris I'm glad for you you deserve it!!!

12-16-2008, 12:13 PM	#184
Magoo Senior Member Join Date: Mar 2007 Posts: 925	Congrats on the new best Chris! __________________ Black 2003 Cobra Ported, Upper/Lower Pullied, Sprayed......going corn Slow 2010 BMW 335i JB4-G5iso, DCI, E85 2002 GSX-R600 Full Bolt-ons

12-20-2008, 04:56 PM	#185
Ronnie Member Join Date: Nov 2007 Posts: 42	No updates to the list, but I should be updating it soon after I get back from the sandbox. I am pretty sure some of you seen the beast sitting by AVT's. The aluminum block is being bored .020, high compression coated diamond pistons and Oliver billet rods are being thrown in the block to handle 26 psi of boost. Heads are extensively ported with 1.50 exhaust valves--aftermarket are up to 1.45. That should be one of the tickets. 3.4 Whipple is being treated to big intake plenum and spacer. Custom ground cams for the heads and charger combo. Complete fuel system to include either 75# or 89# injectors. And, to top it off some more weight reduction. 9's or bust!!!! __________________ '03 Lightning 10.50 @ 128.50 19PSI Truck built & tuned by AVT Performance New motor combo in the works!!!

01-16-2009, 12:05 AM	#189
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	Can I be included if I was driving someone elses car??? even it was a new best for me? __________________

03-22-2009, 09:14 PM	#190
wade w Senior Member Join Date: Aug 2007 Location: Savannah GA Posts: 1,725	Damn we had fun. The first pass on the bottle I messed up the launch a little. It got a 1.51 60ft. Wre it normally gets a 1.39. It still went a 6.31 at 112.9 and 9.89 at 134.7. __________________

01-15-2009, 11:43 PM	#186
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	isn't this out of date? i believe 1Iron is on top now isnt he? 6.teen or something like that?

03-22-2009, 09:18 PM	#191
wade w Senior Member Join Date: Aug 2007 Location: Savannah GA Posts: 1,725	Damn we had fun. The first pass on the bottle I messed up the launch a little. It got a 1.51 60ft. Were it normally gets a 1.39. It still went a 6.31 at 112.9 and 9.89 at 134.7. The next pass it went a 6.15 at 111.6 but they did not give me any 1/4 info. I think it would have been at least a 9.7 something maybe even a 9.6. Next pass was bad. We ran out of nitrous. Couldnt make any more runs it was passed 5. __________________

03-22-2009, 09:43 PM	#192
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Went to the track tonight and got a slip 1.50 60' 7.64 ET 87.5 MPH LOL too bad it was a dud slip. Seems this list hasnt been updated in a while. __________________ Gap A Hoe Racing Last edited by chrisheltra; 03-22-2009 at 09:45 PM.

04-16-2009, 08:53 AM	#193
Illusions Senior Member Join Date: Apr 2008 Location: In the Pits Posts: 2,247	Wow I just looked at the ET list and thought damn, I can hang with these guys... I should be about midway on the list.. Then I realized I was looking at the 1/4 times not the 1/8. I'll go back in my corner now . __________________ Illusions Grafix A Pair of "Jackstand" 01 Xtreme Blazers

04-26-2009, 06:08 PM	#195
dkbmxer002 Moderator Join Date: Jan 2007 Location: orlando/charleston/savannah/D.C. Posts: 2,265	6.703 @ 98.53 :lmao: damn third gear coasting... __________________ white 90's ls single cam nitrous hatchback

04-26-2009, 08:05 PM	#196
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Just realized that I never posted my new 1/8 and 1/4 PB times from Darlington after Randy and I went there last so here it is. __________________ Gap A Hoe Racing