Anyone have a AOD stall converter??

BAD BOB · 01-20-2009, 02:37 PM

Im looking for a stall converter for my fox. Let me know

Darryl Buckner · 01-20-2009, 03:26 PM

I believe I have a stock one..

BAD BOB · 01-20-2009, 04:15 PM

there is a stock one in it now i need one with a higher stall so i can launch harder

LXtasy · 01-20-2009, 05:41 PM

do you need a lock up or non?

Darryl Buckner · 01-20-2009, 06:09 PM

Send the stocker to Mr Cameron and let him loosen it up. He changed the stocker in the Mach 1 to 2700rpm, for about $150.00..

LXtasy · 01-20-2009, 06:14 PM

i have a non lockup aod converter 2800 stall here. NEVER USED. Bought for my fox but was wrong converter.

BAD BOB · 01-20-2009, 09:19 PM

Quote:

Originally Posted by LXtasy

i have a non lockup aod converter 2800 stall here. NEVER USED. Bought for my fox but was wrong converter.

I dont know what i need. But depending on what you want for it and if it will work then we might be able to work something out with your exhaust work

LXtasy · 01-20-2009, 09:57 PM

I will throw it in the truck and you can see.

BAD BOB · 01-20-2009, 10:01 PM

is it a lock up or non?

LXtasy · 01-20-2009, 10:13 PM

I believe non lockup. But quite frankly I am not sure. We tried to install it in my fox. but it wouldn't work with the transmission setup I ended up going with. Custom built aod w/ 4r70w gearset, transgo kit, wide ratio planetaries, etc etc. I will have to DIG for the receipt to see which it was for and what I actually needed. This was almost 2 years ago. I know I paid $285 for it than. Will check real quick

BAD BOB · 01-20-2009, 10:18 PM

And do you know what stall it is?

LXtasy · 01-20-2009, 10:35 PM

2800-3000 area stall. I could not find any record at all of it. I had a folder of all mustang purchases and it must have been shredded

BAD BOB · 01-20-2009, 10:45 PM

thats cool. Yeah if you want to set something up let me know. Im interested in getting it and will prolly need it by sometime next week if possible

LXtasy · 01-20-2009, 10:49 PM

*crosses fingers* Hopefully we are dropping the truck off to you saturday. Maybe friday. Ran into so many problems last friday that we didn't get it started up until after 7pm saturday night

Just buttoning up the little things and putting the front end back together alittle at a time this week. So it should be most likely ready for you for this weekend.

BAD BOB · 01-20-2009, 11:01 PM

sounds good

01-20-2009, 02:37 PM	#1
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	Anyone have a AOD stall converter?? Im looking for a stall converter for my fox. Let me know

01-20-2009, 03:26 PM	#2
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	I believe I have a stock one.. __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

01-20-2009, 05:41 PM	#4
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	do you need a lock up or non? __________________

01-20-2009, 06:09 PM	#5
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	Send the stocker to Mr Cameron and let him loosen it up. He changed the stocker in the Mach 1 to 2700rpm, for about $150.00.. __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

01-20-2009, 06:14 PM	#6
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	i have a non lockup aod converter 2800 stall here. NEVER USED. Bought for my fox but was wrong converter. __________________

01-20-2009, 04:15 PM	#3
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	there is a stock one in it now i need one with a higher stall so i can launch harder

01-20-2009, 09:57 PM	#8
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	I will throw it in the truck and you can see. __________________

01-20-2009, 10:01 PM	#9
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	is it a lock up or non?

01-20-2009, 10:13 PM	#10
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	I believe non lockup. But quite frankly I am not sure. We tried to install it in my fox. but it wouldn't work with the transmission setup I ended up going with. Custom built aod w/ 4r70w gearset, transgo kit, wide ratio planetaries, etc etc. I will have to DIG for the receipt to see which it was for and what I actually needed. This was almost 2 years ago. I know I paid $285 for it than. Will check real quick __________________

01-20-2009, 10:18 PM	#11
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	And do you know what stall it is?

01-20-2009, 10:35 PM	#12
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	2800-3000 area stall. I could not find any record at all of it. I had a folder of all mustang purchases and it must have been shredded __________________

01-20-2009, 10:45 PM	#13
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	thats cool. Yeah if you want to set something up let me know. Im interested in getting it and will prolly need it by sometime next week if possible

01-20-2009, 10:49 PM	#14
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	crosses fingers Hopefully we are dropping the truck off to you saturday. Maybe friday. Ran into so many problems last friday that we didn't get it started up until after 7pm saturday night Just buttoning up the little things and putting the front end back together alittle at a time this week. So it should be most likely ready for you for this weekend. __________________

01-20-2009, 11:01 PM	#15
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	sounds good