White00gt

OUTLAW · 05-22-2010, 07:30 AM

YOU STILL GOING ? IF SO I NEED THE BACK TIRES AND THE LEAVE

White00gt · 05-22-2010, 12:44 PM

Back Tires and the leave??? I just woke up.......Yeah I'm coming, I've got to get to atown, I'm dragging today.

OUTLAW · 05-22-2010, 12:49 PM

You need to get to work days almost gone

White00gt · 05-22-2010, 12:58 PM

I ran to the shop for lunch yesterday and grabbed my 10.5's and 275's. While I as there I dropped plumb-bobs off of everything. The rearend is square by all the plumb-bobs. So I swapped tires on rims and checked rims for run out. Bogarts are straight as an arrow so I put the 275's on them. I checked the welds, and wow they were wobbleing like a wet noodle. I didn't pay attention to which rim was on which side but the lateral and radial run outs on one of my welds was wayyyy out. So at the moment, I'm going with that rim??

I don't like that assumption tho, due to thinking that a rim out that bad would of rattled me durring the burn out?? So.....Thinking something is going on with the frontend so I'm going to check all of that today. What time do gates open Sunday? 3?

OUTLAW · 05-23-2010, 07:53 AM

yes it is at 3

OUTLAW · 05-24-2010, 08:12 AM

how is work? i got home at aboute 2

White00gt · 05-24-2010, 08:29 AM

same here I was home at 2...and what you doing posting before I even get up on your day off..

I looked at the vid from my last pass when I got home..You have to look under the car at the right front. She picks it up and puts it down twice that I can see for sure, but felt like 3-4 times in the car.

OUTLAW · 05-24-2010, 12:42 PM

Quote:

Originally Posted by White00gt

same here I was home at 2...and what you doing posting before I even get up on your day off..

I looked at the vid from my last pass when I got home..You have to look under the car at the right front. She picks it up and puts it down twice that I can see for sure, but felt like 3-4 times in the car.

you have to put on a vid so i can see

White00gt · 05-24-2010, 12:59 PM

I'm looking over your stuff right now.....I'm checking different vids trying to see where the 60ft clocks are, but I swear it's looking like you were still at about a 30*+ angle when you went threw the 60ft, on your last two runs.

White00gt · 05-24-2010, 01:01 PM

I've got my laptop here.. I got to do 4 corner brakes on a jeep, when I'm done I'll see if I can get something done here. If not when I get home for sure.

OUTLAW · 05-24-2010, 01:40 PM

Quote:

Originally Posted by White00gt

I've got my laptop here.. I got to do 4 corner brakes on a jeep, when I'm done I'll see if I can get something done here. If not when I get home for sure.

its aboute time they get some work out of you

White00gt · 05-24-2010, 01:43 PM

Bahhh General public...

Racercar please

OUTLAW · 05-24-2010, 04:33 PM

hey man you need to try bowman it is a good track

White00gt · 05-24-2010, 04:35 PM

Lets rock and roll, I didn't realize that people were saying it's really close to Dorchester, I didn't know that. I don't even now where I'm at when I'm at Dorchester.

soccerspike15 · 05-24-2010, 04:49 PM

Quote:

Originally Posted by White00gt

Lets rock and roll, I didn't realize that people were saying it's really close to Dorchester, I didn't know that. I don't even now where I'm at when I'm at Dorchester.

how do you like those goodyear radials?

White00gt · 05-24-2010, 04:51 PM

loves them, a big selling point on them for me was the sidewall.. With 17psi my radial sidewalls are as spongy as my 10.5's with 12psi.

OUTLAW · 05-24-2010, 04:53 PM

lets do it how about those 295 radials

White00gt · 05-24-2010, 05:02 PM

295 is a 30" tire..I think. 315 is also I think. but then again could be like the 275/60 vs. 275/50 26" and 28" respectivly

1iron · 05-24-2010, 05:10 PM

The MT 295/55/15 is a 28in tire

OUTLAW · 05-24-2010, 05:43 PM

Quote:

Originally Posted by 1iron

The MT 295/55/15 is a 28in tire

is it like a 28 10.5 ?

05-22-2010, 07:30 AM	#1
OUTLAW Senior Member Join Date: May 2010 Posts: 417	White00gt YOU STILL GOING ? IF SO I NEED THE BACK TIRES AND THE LEAVE

05-22-2010, 12:44 PM	#2
White00gt Senior Member Join Date: May 2010 Location: PI, S.C. Posts: 565	Back Tires and the leave??? I just woke up.......Yeah I'm coming, I've got to get to atown, I'm dragging today. __________________ M. Ragland . Dropbox sign up link +space http://db.tt/9sBmLpl

05-22-2010, 12:58 PM	#4
White00gt Senior Member Join Date: May 2010 Location: PI, S.C. Posts: 565	I ran to the shop for lunch yesterday and grabbed my 10.5's and 275's. While I as there I dropped plumb-bobs off of everything. The rearend is square by all the plumb-bobs. So I swapped tires on rims and checked rims for run out. Bogarts are straight as an arrow so I put the 275's on them. I checked the welds, and wow they were wobbleing like a wet noodle. I didn't pay attention to which rim was on which side but the lateral and radial run outs on one of my welds was wayyyy out. So at the moment, I'm going with that rim?? I don't like that assumption tho, due to thinking that a rim out that bad would of rattled me durring the burn out?? So.....Thinking something is going on with the frontend so I'm going to check all of that today. What time do gates open Sunday? 3? __________________ M. Ragland . Dropbox sign up link +space http://db.tt/9sBmLpl

05-24-2010, 08:12 AM	#6
OUTLAW Senior Member Join Date: May 2010 Posts: 417	white00gt how is work? i got home at aboute 2

05-24-2010, 08:29 AM	#7
White00gt Senior Member Join Date: May 2010 Location: PI, S.C. Posts: 565	same here I was home at 2...and what you doing posting before I even get up on your day off.. I looked at the vid from my last pass when I got home..You have to look under the car at the right front. She picks it up and puts it down twice that I can see for sure, but felt like 3-4 times in the car. __________________ M. Ragland . Dropbox sign up link +space http://db.tt/9sBmLpl

05-22-2010, 12:49 PM	#3
OUTLAW Senior Member Join Date: May 2010 Posts: 417	You need to get to work days almost gone

05-23-2010, 07:53 AM	#5
OUTLAW Senior Member Join Date: May 2010 Posts: 417	yes it is at 3

05-24-2010, 12:59 PM	#9
White00gt Senior Member Join Date: May 2010 Location: PI, S.C. Posts: 565	I'm looking over your stuff right now.....I'm checking different vids trying to see where the 60ft clocks are, but I swear it's looking like you were still at about a 30*+ angle when you went threw the 60ft, on your last two runs. __________________ M. Ragland . Dropbox sign up link +space http://db.tt/9sBmLpl

05-24-2010, 01:01 PM	#10
White00gt Senior Member Join Date: May 2010 Location: PI, S.C. Posts: 565	I've got my laptop here.. I got to do 4 corner brakes on a jeep, when I'm done I'll see if I can get something done here. If not when I get home for sure. __________________ M. Ragland . Dropbox sign up link +space http://db.tt/9sBmLpl

05-24-2010, 01:43 PM	#12
White00gt Senior Member Join Date: May 2010 Location: PI, S.C. Posts: 565	Bahhh General public... Racercar please __________________ M. Ragland . Dropbox sign up link +space http://db.tt/9sBmLpl

05-24-2010, 04:33 PM	#13
OUTLAW Senior Member Join Date: May 2010 Posts: 417	hey man you need to try bowman it is a good track

05-24-2010, 04:35 PM	#14
White00gt Senior Member Join Date: May 2010 Location: PI, S.C. Posts: 565	Lets rock and roll, I didn't realize that people were saying it's really close to Dorchester, I didn't know that. I don't even now where I'm at when I'm at Dorchester. __________________ M. Ragland . Dropbox sign up link +space http://db.tt/9sBmLpl

05-24-2010, 04:51 PM	#16
White00gt Senior Member Join Date: May 2010 Location: PI, S.C. Posts: 565	loves them, a big selling point on them for me was the sidewall.. With 17psi my radial sidewalls are as spongy as my 10.5's with 12psi. __________________ M. Ragland . Dropbox sign up link +space http://db.tt/9sBmLpl

05-24-2010, 04:53 PM	#17
OUTLAW Senior Member Join Date: May 2010 Posts: 417	lets do it how about those 295 radials

05-24-2010, 05:02 PM	#18
White00gt Senior Member Join Date: May 2010 Location: PI, S.C. Posts: 565	295 is a 30" tire..I think. 315 is also I think. but then again could be like the 275/60 vs. 275/50 26" and 28" respectivly __________________ M. Ragland . Dropbox sign up link +space http://db.tt/9sBmLpl

05-24-2010, 05:10 PM	#19
1iron Senior Member Join Date: May 2007 Posts: 2,014	The MT 295/55/15 is a 28in tire