Ford rear ends (8.8 or 9in) - Page 3

Matts94Z28 · 02-04-2011, 11:16 AM

Quote:

Originally Posted by 98nbmz

S60 is a heavy bitch!

It it, but it doesn't rob as much power as a 9in so its a wash.

AverageJoe · 02-04-2011, 12:03 PM

S60 is heavy and robs more power than a 9"

Blue Skunk · 02-04-2011, 12:06 PM

I have a 9" 31 spline Detroit locker with bearings i can do you a deal on.

2fast4u2catch · 02-04-2011, 12:16 PM

im waiting on my mwc 9 inch to get here my thoughts are if your gonna do it do it right the first time. 12 bolts are junk for these cars i had one in my lt1 car and after 2 months of having it in and a handfull of hard launches it was making some serious noise. they just dont like tq aarms

Matts94Z28 · 02-04-2011, 12:17 PM

Quote:

Originally Posted by AverageJoe

S60 is heavy and robs more power than a 9"

Google master has failed.

2fast4u2catch · 02-04-2011, 12:18 PM

Quote:

Originally Posted by RobertHolton1

ten bolt would last, just need to get somebody to set them up that knows what they are doing, ive seen people go plenty fast with a ten bolt

you being serious?

2fast4u2catch · 02-04-2011, 12:19 PM

the s60 is way heavier but a 9 inch would rob more horsepowerz

bwelch · 02-04-2011, 12:41 PM

Are you gonna shoot that bitch after you get a rear end

Illusions · 02-04-2011, 12:58 PM

Quote:

Originally Posted by bwelch

Are you gonna shoot that bitch after you get a rear end

Now that's funny right there no matter who you are....

Matts94Z28 · 02-04-2011, 01:40 PM

Quote:

Originally Posted by bwelch

Are you gonna shoot that bitch after you get a rear end

That's the last part of the equation! 50shot out the hole!

dkbmxer002 · 02-04-2011, 02:03 PM

9 inch ftw! but i bounced back and forth between the s60 and 9 inch when i did mine.

1998ta__1991rs · 02-04-2011, 03:35 PM

I've seen 10 bolts go low 6s reliably with good axles. Mine twisted an axle after going numerous 6.30s. It was a completely stock rear end

LXtasy · 02-04-2011, 05:09 PM

Quote:

Originally Posted by Harry

Wow 38 spline. That must have been the High Torque model Ranger.

Sorry, posted in a hurry. Thank you einstein for pointing out the flaw.

LXtasy · 02-04-2011, 05:11 PM

Matt, go to LKQ and get another stock rear end. You have plenty of racing on your stocker so another stocker should last also. Not enough power to really break a 10 bolt. You just wear them out

Harry · 02-04-2011, 05:23 PM

Quote:

Originally Posted by LXtasy

Sorry, posted in a hurry. Thank you einstein for pointing out the flaw.

Wasn't pointing out a flaw. Just making a funny. Ha Ha Ha

Matts94Z28 · 02-04-2011, 05:43 PM

Quote:

Originally Posted by LXtasy

Matt, go to LKQ and get another stock rear end. You have plenty of racing on your stocker so another stocker should last also. Not enough power to really break a 10 bolt. You just wear them out

If they had 3.73's in all of them I would buy a couple, lol.

MonteC · 02-04-2011, 06:56 PM

I say sack up and buy a good rear end. Dont try and Selepack something together.

chrisheltra · 02-04-2011, 07:39 PM

Quote:

Originally Posted by MonteC

I say sack up and buy a good rear end. Dont try and Selepack something together.

Sig worthy and rep added

98nbmz · 02-04-2011, 07:48 PM

Quote:

Originally Posted by 2fast4u2catch

im waiting on my mwc 9 inch to get here my thoughts are if your gonna do it do it right the first time. 12 bolts are junk for these cars i had one in my lt1 car and after 2 months of having it in and a handfull of hard launches it was making some serious noise. they just dont like tq aarms

How long ago did you order it>?

BigdaddyDupree · 02-04-2011, 09:16 PM

My 10 bolt went a 7.30 once on a 10 bolt then grenaded

02-04-2011, 12:16 PM	#44
2fast4u2catch Senior Member Join Date: Apr 2009 Posts: 489	im waiting on my mwc 9 inch to get here my thoughts are if your gonna do it do it right the first time. 12 bolts are junk for these cars i had one in my lt1 car and after 2 months of having it in and a handfull of hard launches it was making some serious noise. they just dont like tq aarms __________________ SUPAMAN MOTORSPORTS SHOWBOATIN FROM COAST TO COAST

02-04-2011, 12:19 PM	#47
2fast4u2catch Senior Member Join Date: Apr 2009 Posts: 489	the s60 is way heavier but a 9 inch would rob more horsepowerz __________________ SUPAMAN MOTORSPORTS SHOWBOATIN FROM COAST TO COAST

02-04-2011, 12:41 PM	#48
bwelch Senior Member Join Date: Aug 2009 Posts: 3,774	Are you gonna shoot that bitch after you get a rear end __________________

02-04-2011, 02:03 PM	#51
dkbmxer002 Moderator Join Date: Jan 2007 Location: orlando/charleston/savannah/D.C. Posts: 2,265	9 inch ftw! but i bounced back and forth between the s60 and 9 inch when i did mine. __________________ white 90's ls single cam nitrous hatchback

02-04-2011, 03:35 PM	#52
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	I've seen 10 bolts go low 6s reliably with good axles. Mine twisted an axle after going numerous 6.30s. It was a completely stock rear end __________________ Funny

02-04-2011, 12:06 PM	#43
Blue Skunk Senior Member Join Date: Apr 2010 Location: LA (Ladson Area) Posts: 459	I have a 9" 31 spline Detroit locker with bearings i can do you a deal on.

02-04-2011, 05:11 PM	#54
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Matt, go to LKQ and get another stock rear end. You have plenty of racing on your stocker so another stocker should last also. Not enough power to really break a 10 bolt. You just wear them out __________________

02-04-2011, 06:56 PM	#57
MonteC Senior Member Join Date: Oct 2009 Location: Summerville Posts: 4,431	I say sack up and buy a good rear end. Dont try and Selepack something together. __________________ Griffin Transmission -Home of the most badassest Monte Carlo- Cell: 843-276-0554 Shop: 843-793-4607 04 RSX 06 Ridgeline 86 Monte Carlo

02-04-2011, 09:16 PM	#60
BigdaddyDupree Senior Member Join Date: Jul 2008 Location: MACEDONIA Posts: 4,967	My 10 bolt went a 7.30 once on a 10 bolt then grenaded __________________ . What you wanna do?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode