Started on my truck. - Page 7

LXtasy · 08-14-2008, 09:38 PM

You might want to ask on this site

j/k

wade w · 08-15-2008, 10:18 PM

Allrighty. Pulled the SC and the intercooler back off. Tapped all of the holes all the way to the bottom. put it back together and everything went fine. One other thing I did that im sure you guys have found a way around. The very back bolt on the SC on the passanger side is a PITA to put in if you use the factory bolt. I notched the front of the hole in just the SC about a 1/4in
and it droped right in. I know there are a few other things that could be done about it, but I wanted it to look like I hadnt done anything. All I have now are hoses and wires. And just a few. YEA!!!!!

Mike · 08-15-2008, 10:20 PM

Good luck!!!

wade w · 08-15-2008, 10:25 PM

Quote:

Originally Posted by Mike

Good luck!!!

Thanks Mike. You have been the biggest help!

wade w · 08-16-2008, 12:09 PM

Well I figured out were everything went. Got it finished. Theres a tapping coming from the left side. Looks like its going to sit for a while again.

Whaler · 08-16-2008, 12:41 PM

Quote:

Originally Posted by wade w

Well I figured out were everything went. Got it finished. Theres a tapping coming from the left side. Looks like its going to sit for a while again.

Call Mitch.

wade w · 08-16-2008, 01:31 PM

Quote:

Originally Posted by Whaler

Call Mitch.

I tryed. He didnt answer, but thanks Whaler. I took the drvers side valve cover off and had my brother try to start it just to see if I could see anything. Well I did. The sprocket on the front of the cam was turning but the cam was not. I dont understand it. I know I had them lined up. And I turned the motor over by hand before I started it. Just to make sure nothing was hitting just in case I had something wrong. Unless I was told wrong on how to line them up and I didnt turn it over far enough. I really dont know what to do now.

wade w · 08-16-2008, 03:20 PM

Spoke with Mitch. Maybe all is not lost.

Whaler · 08-16-2008, 04:05 PM

Quote:

Originally Posted by wade w

Spoke with Mitch. Maybe all is not lost.

Quit posting and go fix it.

wade w · 08-17-2008, 04:08 PM

Quote:

Originally Posted by Whaler

Quit posting and go fix it.

Got to find out what the problem is. Anybody have any stock cams lying around?

Richard Head · 08-22-2008, 04:27 PM

Wade, you making any progress? Do let a little rain hold you up.
Hope all is well.

wade w · 08-22-2008, 06:19 PM

Quote:

Originally Posted by Richard Head

Wade, you making any progress? Do let a little rain hold you up.
Hope all is well.

Thanks. Im really not sure what to do now. I dont know what caused the cam to stop. Untill I find out Im kinda stuck.

08-14-2008, 09:38 PM	#121
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	You might want to ask on this site j/k __________________

08-22-2008, 04:27 PM	#131
Richard Head Supporting Member Join Date: Mar 2007 Posts: 788	Wade, you making any progress? Do let a little rain hold you up. Hope all is well. __________________

08-15-2008, 10:18 PM	#122
wade w Senior Member Join Date: Aug 2007 Location: Savannah GA Posts: 1,725	Allrighty. Pulled the SC and the intercooler back off. Tapped all of the holes all the way to the bottom. put it back together and everything went fine. One other thing I did that im sure you guys have found a way around. The very back bolt on the SC on the passanger side is a PITA to put in if you use the factory bolt. I notched the front of the hole in just the SC about a 1/4in and it droped right in. I know there are a few other things that could be done about it, but I wanted it to look like I hadnt done anything. All I have now are hoses and wires. And just a few. YEA!!!!!

08-15-2008, 10:20 PM	#123
Mike Senior Member Join Date: Dec 2006 Location: Goose Creek, SC Posts: 5,481	Good luck!!!

08-16-2008, 12:09 PM	#125
wade w Senior Member Join Date: Aug 2007 Location: Savannah GA Posts: 1,725	Well I figured out were everything went. Got it finished. Theres a tapping coming from the left side. Looks like its going to sit for a while again.

08-16-2008, 03:20 PM	#128
wade w Senior Member Join Date: Aug 2007 Location: Savannah GA Posts: 1,725	Spoke with Mitch. Maybe all is not lost.